• Journal of the Korean Society for Railway
• /
• v.14 no.2
• /
• pp.116-120
• /
• 2011

For the train positioning system currently applied in high-speed MAGLEV train systems, it is classified into absolute positioning systems which discontinuously detect train positions, and relative positioning systems which continuously detect train positions. In this paper we analyze the configuration model and the numerical model of the absolute positioning system applied in TRANSRAPID which is a representative high-speed MAGLEV train, and design the two configuration models specific to the recognition structures of absolute positioning systems. We also verify the compatibility of the design models of absolute positioning system through simulation using MATLAB and propose the optimal configuration model of absolute positioning systems for high-speed MAGLEV train system.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.802-810
• /
• 2006

For a thorough train control, the precise train position detection is necessarily required. The widely used current way for train position detection is the one of using track circuits. The track circuit has a simple structure, and has a high level of reliability. However trains can be detected only on track circuits, which have to be installed on all ground sections, and much amount of cost for its installation and maintenance is needed. In addition, for the track circuit, only discontinuous position detection is possible because of the features of the closed circuit loop configuration. As the recent advances in telecommunication technologies and high-tech vehicle-based control equipments, for the train position detection, the method to detect positions directly from on trains is being studied. Vehicle-based position detection method is to estimate train positions, speed, timing data continuously, and to use them as the control information. In this paper, the features of GPS navigation and DR navigation are analyzed, and the navigation filters are designed by constructing vehicle-based train position detection method by combining GPS navigation and DR navigation for their complementary cooperation, and by using kalman filter. The position estimation performance of the proposed method is also confirmed by simulations.

• Journal of Korean Society of Transportation
• /
• v.17 no.1
• /
• pp.105-112
• /
• 1999

Image Processing Technique has been used as an efficient method to collect traffic information on the road such as vehicle counts, speed, queues, congestion and incidents. Most of the current methods which have been used to detect vehicles by the image processing are based on point processing, dealing with the local gray level of each pixel in the small window. However, these methods have some drawbacks. Firstly, detection is restricted by image quality. Secondly, they can not deal with occlusion and perspective projection problems, In this research, a new method which possibly deals with occlusion and perspective problems will be proposed. It extracts spatial information such as the position, the relationship of vehicles in 3-dimensional space, as well as vehicle detection in the image. The main algorithm used in this research is based on an extension of the Hough Transform. The Hough Transform which is proposed to estimates parameters of vertices and directed edges analytically on the Hough Space, is a valuable method for the 3-dimensional analysis of static scenes, motion detection and the estimation of viewing parameters.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.35 no.1
• /
• pp.18-24
• /
• 2015

Train positioning detection information is fundamental for high-speed railroad inspection, making it possible to simultaneously determine the status and evaluate the integrity of railroad equipment. This paper presents the results of measurements and an analysis of an inertial measurement unit (IMU) used as a positioning detection sensors. Acceleration and angular rate measurements from the IMU were analyzed in the amplitude and frequency domains, with a discussion on vibration and train motions. Using these results and GPS information, the positioning detection of a Korean tilting train express was performed from Naju station to Illo station on the Honam-line. The results of a synchronized analysis of sensor measurements and train motion can help in the design of a train location detection system and improve the positioning detection performance.

• Railway Journal
• /
• v.15 no.1
• /
• pp.16-21
• /
• 2012

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.5
• /
• pp.125-135
• /
• 2012

This paper proposes the new object detection system with two laser-scanners and a camera for classifying the objects and predicting the location of objects on road street. This detection system could be applied the new C-ITS service such as ADAS(Advanced Driver Assist System) or (semi-)automatic vehicle guidance services using object's types and precise position. This study describes the some examples in other countries and feasibility of object detection system based on a camera and two laser-scanners. This study has developed the heterogenous sensor's fusion method and shows the results of implementation at road environments. As a results, object detection system at roadside infrastructure is a useful method that aims at reliable classification and positioning of road objects, such as a vehicle, a pedestrian, and obstacles in a street. The algorithm of this paper is performed at ideal condition, so it need to implement at various condition such as light brightness and weather condition. This paper should help better object detection and development of new methods at improved C-ITS environment.

• Proceedings of the KIEE Conference
• /
• 2003.04a
• /
• pp.415-417
• /
• 2003

TOA(Time of Arrival) 및 TDOA(Time Difference of Arrival)경우 무선국의 시간동기화를 위해서 고도의 기술을 요구하고 있으며, 시간동기오차에 따른 위치검지의 정밀도가 낮아지는 문제가 있어 이를 극복하기 위하여 위상차를 이용한 새로운 열차검지기법의 제안에 따른 구현을 위하여 무선장치 설계에 대하여 기술하고자 한다. 본 시스템은 전파의 전달 속도($\lambda$)를 응용하여 기준 주파수인 1.5MHz를 송신 시스템과 수신 시스템의 기준 주파수와 비교하여 그 위상의 차이를 비교하여 지연된 시간을 구한 후 이를 거리로 환산하는 시스템으로서 무선장치와 S/W로 구분하여 구현 설계하였다.

• The Journal of Engineering Research
• /
• v.8 no.1
• /
• pp.59-65
• /
• 2006

본 논문에서는 마이크로폰 어레이 시스템을 이용하여 여러 화자의 음성 정보로부터 각 화자가 위치한 방향을 추정하는 기술 개발 내용을 다룬다. 성능 향상을 위한 전처리 과정으로 비선형 증폭기를 사용하여 거리에 따른 영향을 최소화하는 과정과 잡음에 대한 강인성을 얻기 위해 음성활성 영역을 검출하는 과정을 포함한다. 등간격으로 배치된 마이크로폰 어레이 시스템의 기하학적 특성에 따른 음원의 위치와 신호의 지연시간차이와의 상관관계로부터 화자의 위치를 역으로 추정하는 알고리즘을 기본으로 하여 가능성 척도를 계산하고 이를 활용하여 가능성이 높은 것들을 클러스터링하여 가능성이 있는 후보를 선정하여 화자의 방향을 검지한다. 이 과정에서 오인식을 최소화하기 위하여 가능성이 희박한 영역에 대한 추정 억제 방법으로 부정식 추론법을 적용하였다. 2 화자의 음성 신호를 입력으로 한 실험을 통하여 제안한 방법에 의한 다화자 방향검지의 가능성을 알아보았다.

• Journal of the Korean Society for Railway
• /
• v.18 no.2
• /
• pp.105-110
• /
• 2015

This paper presents a $4{\times}1$ beam-forming reader antenna system for a new type of RFID based train position detection technology. The required beamwidth of the reader antenna is analytically expressed for different train speeds. The proposed antenna system consists of four rectangular patch elements and two switching couplers which are designed, without any impedance matching networks, for two different antenna modes. The switching coupler is a rectangular quadrature coupler with Pin diodes connecting its center line and the ground plane. The beamwidth of the antenna when the diodes are off and on is $18^{\circ}$ and $39^{\circ}$, respectively. The proposed antenna system will be used for a real train test in the near future.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1044-1045
• /
• 2015

차량 자동주행제어시스템에서 차량의 주행중 위치정보는 매우 중요한 요소이다. 이를 위해 GPS를 기반으로 하는 많은 연구가 수행되어 왔다. 하지만PRT(Personal rapid transit) 시스템과 같이 건물내부 또는 터널 등 위성의 가시권을 벗어난 영역에서는 사용성이 크게 제한된다. 본 논문에서는 이런 적용환경을 고려하여 국내에서 개발되고 있는 PRT차량의 주행제어 시스템에서 활용하기 위한 자석검지시스템과 자석검지기술을 제시하였다.