• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.2
• /
• pp.195-200
• /
• 2011

A low power Hall thruster is under development for orbit maintenance of a small Earth observing satellite. Both cylindrical and annular type thrusters were manufactured and tested to characterize the performance of cylindrical Hall thrusters. Results were described through comparative analyses. Cylindrical thrusters were manufactured in two different channel diameter dimensions, 28 mm and 50 mm. Thrust, ion velocity and ion current were measured in various operating conditions. The results show that cylindrical thrusters are more efficient in mass utilization and voltage utilization, but less efficient in current utilization than annular one.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1995.11a
• /
• pp.59-66
• /
• 1995

인공위성의 궤도진입, 궤도수정 및 자세제어를 담당하는 추진체계는 위성의 용도와 궤도위치, 자세/궤도제어 방식 등을 고려하여 설계하여야 한다. 현재까지도 널리 사용되고 있는 인공위성 추진체계는 AKM(Apogee Kick Motor)과 단일 추진제 추력기로 구성된 "통상 추진체계"이나 최근에는 AKE(Apogee Kick Engine)과 이원 추진제추력기로 구성된 "통합 추진체계" 그리고 이와 유사한 "완전통합 추진체계", "이중 추진체계" 등이 기술적 선택방안으로 제안되어 일부 적용되고 있는 실정이며 이러한 추진체계의 효과적 실용화를 위해서 단일 추진제(하이드라진) 추력기의 성능향상 및 이원 추진제 엔진과 이원 추진제 추력기의 기술개선 연구가 이루어지고 있다.원 추진제 엔진과 이원 추진제 추력기의 기술개선 연구가 이루어지고 있다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.1 no.2
• /
• pp.67-73
• /
• 1997

This paper shows the development status of attitude control thruster for KOMPSAT(Korea Multi-Purpose Satellite). Hanwha Corp. has manufactured and delivered 1.0 lbf monopropellant thrusters under the technology transfer of TRW Co. in U.S.A regarding design, analysis and manufacturing of MRE-1 thruster These thrusters will be installed to KOMPSAT which is scheduled to be launched in July 1999. Monopropellant thrusters can provide reliable and cost-effective means of propulsive control for middle class satellite and maneuvering control systems. Some information concerning with system specification, performance analysis/simulations and manufacturing process has been introduced in this paper.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.8
• /
• pp.141-147
• /
• 2002

Estimation of thrusters efficiency is a very important process at the end of lifetime of a satellite. This paper introduces a technique to estimate the efficiency change of thrusters considering bubble effect for Koreasat I. During APEMAC(Automatic Pitch Error/ Momentum Adjust Control), the change in thruster efficiency is estimated to compare the attitude telemetry data of the Koreasat I with the results of the control logic using Simulink. The outcome of this study is expected to contribute to improving the operational load at the end of generic communication satellite mission.

• Aerospace Engineering and Technology
• /
• v.1 no.1
• /
• pp.97-105
• /
• 2002

The mission life of a satellite determines the amount of fuel required on-board, while the total mass requirement limits the fuel to be loaded. Hence, for the design of thruster control loop, not only the satellite pointing accuracy but the saving of fuel is to be considered. In this paper, a two-step fuzzy controller is proposed for the thruster control loop to save fuel consumption. This approach combines requirements for pointing control accuracy with minimum fuel consumption into a fuzzy controller design. To demonstrate this approach, we have designed a fuzzy controller for the Sun Pointing Mode of KOMPSAT-1. The performance of this fuzzy controller design is compared with that of PD controller used for KOMPSAT-1.

• Aerospace Engineering and Technology
• /
• v.1 no.2
• /
• pp.51-56
• /
• 2002

Satellite propulsion system is employed for orbit transfer, orbit correction, and attitude control. The monopropellant feeding system in the low-earth-orbit satellite blowdowns fuel to the thrust chamber. The thrust produced by the thruster depends on fuel amount flowed into the combustion chamber. If the thruster valve be given on-off signal from on-board commander in the satellite, valve will be opened or closed. When the thrusters fire fuel flows through opened thruster valve, instantaneous stoppage of flow in according to valve actuation produces transient pressure due to pressure wave. This paper describes transient pressure predictions of the KOMPSAT-2 propulsion system resulting from latching valve and thrust control valve operations. The time-dependent set of the fluid mass and momentum equations are calculated by MOC.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.179-182
• /
• 2007

The new KOMPSAT in preliminary design phase will utilize 4.45 N monopropellant thrusters for attitude and orbit control. In this paper, a numerical plume analysis is performed to verify the effects of thruster plume on the satellite with a 3-D satellite base region model by DSMC. As a result, plume behaviors such as overall plume temperature, total density and thermal radiation to solar array are estimated.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.5
• /
• pp.432-439
• /
• 2015

MEMS solid thruster module is composed of solid thruster and its control board. It was developed for the purpose of an academic research. Therefore, thermo-mechanical design and verification for space usage were not considered in the design phase. To mount it on a cube satellite without any design modification, technical efforts at the system level structure design is required. In this study, we proposed a structural design concept to mount the MEMS thruster module by using brackets for guaranteeing structure safety under launch loads and easier mating and de-mating of MEMS thruster module during test phase. The effectiveness of the design has been verified through structural analysis and vibration test. In addition, electrical connection method using spring pins between MEMS thruster and control board is effective for guaranteeing the structural safety under launch vibration loads.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.298-302
• /
• 2009

Low power Hall thruster is under development as one of the core technologies for STSAT-3. The Hall thruster has several advantages such as its simple structure, high thrust density and specific impulse etc. Development target values deduced by analyzing requirements are consumed electrical power, thrust, thrust efficiency, and specific impulse of < 300 W, > 10 mN, ~ 35%, and > 1000 s, respectively. In order to achieve the target specifications, two prototype Hall thrusters were developed and compared. To date, thrust and efficiency are 11 mN and 37% under the total power of 290 W with 0.97 mg/s Xe propellent supply.

• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.45.3-46
• /
• 2009

홀 추력기는 비교적 간단한 구조와 작은 크기 및 높은 연료효율로 미래 소형위성의 핵심기술로 주목 받고 있다. 이 연구실에서는 2010년 발사예정인 과학기술위성 3호에 탑재할 소형위성용 저 전력 홀 추력기를 연구 개발하였다. 성능에 가장 큰 영향을 미치는 자기장 구조는 FEMM전산코드를 이용한 해석을 통해 설계되었으며, 제작된 프로토타입의 실험을 통해 자기장의 세기 및 모양, 양극전압 및 기체유량에 따른 성능 특성을 관찰하였다. 또한 Faraday Probe와 Retarding Potential Analyzer (RPA), 랑뮈어 탐침 등을 이용해 이온빔의 분사각도 및 전류밀도, 이온에너지 분포, 플라즈마 전위 등을 측정하고 관찰된 특성을 물리적으로 분석하였다. 이러한 최적화 과정을 통해 설계된 비행모델의 시험 결과 양극전력 200 W, 제논 연료유량 0.85 mg/s 을 통해 11.2 mN 추력, 1350 s 비추력, 37% 추력효율을 획득하여 개발목표를 상회하는 만족할만한 결과를 얻었다.