• Journal of the Korean Society of Propulsion Engineers
• /
• v.10 no.3
• /
• pp.109-117
• /
• 2006

Hot firing performance test of hydrazine decomposition catalyst used for monopropellant thruster of satellite and launch vehicle was performed on the ground. A test equipment for hot firing performance measurement of catalyst test was developed in collaboration with Hanwha Corp., and the catalyst firing performance were tested with the equipment. After a reaction delay time, a catalyst activity and a granule stability were measured for 2 times, satisfactory results were obtained such as 25msec, 2%, $704^{\circ}C$ for each test items on the average. In addition, the current development status of domestic prototype catalyst and its decomposition performance test results are presented.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.4
• /
• pp.494-502
• /
• 2001

GPS(Global Positioning System) and GLONASS(GLObal Navigation Satellite System) are basic technologies providing the information of the position and the time, and they have various applications such as navigation, survey, control, and so on. However, each GPS and GLONASS has limited number of visible satellites, and, from the view of strategy, it is undesirable to be heavily dependent on only one system. Thus, GPS/GLONASS combined receiver became required to obtain more precise navigation and system stability. In this paper, the RF front end of GPS/GLONASS combined receiver was fabricated on 130$\times$80 $\textrm{mm}^2$ PCB(Printed Circuit Board), and its system application was shown finally one chip possibility of GLONASS receiver is studied.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.4 s.107
• /
• pp.324-329
• /
• 2006

In this paper, a resonator with the substrate integrated waveguide(SIW) structure at the satellite communication band is presented. The SIW structure is realized by via-holes on the dielectric substrate and has an advantage of integration with other circuits. For the measurement, a designed back-to-back transition has the insertion loss of 0.4 dB at 18 GHz. Also, the quality factor of the resonator with the SIW structure including back-to-back transition is obtained to be 222. The high-Q resonator with the SIW structure can be used in filter, oscillator, and voltage controlled oscillator.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.4
• /
• pp.351-357
• /
• 2003

An easy learning elevator originated is opened to compare the existed teaming equipment, and it had a high studied efficiency that the sequence control circuit can open and close with the wire. The structure of equipment to be controlled from the first floor to the fifth floors is demostrated by the constructive apparatus with the lamps to express the function of the open-close of the door according to the cage moving with a mechanical actuation of the forward reverse breaker and the motor of load, and the mechanical actuation of hand-operation control components of push-button S/W and L/S and relay etc. These components let connect each other in order to control of the elevator function with the auto program and the designed sequence control circuit. Consequently the cage could go and come till 1∼5 steps with an auto program of the elevator and the sequence control circuit. The sequence control circuit is controlled by the step of forward and reverse to follow as that the sensor function of L/S1 ∼ L/S5 let posit with the control switchs of S/W1 ∼ S/W5 of PLC testing panel and switchs of S/W1 ∼ S/W5 installed on the transparent acryl plate of the frame. In here, improved apparatus is the hand-auto operation combined learning equipment to study the principle and technique of the originate sequence control circuit and the auto program of PLC.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.3
• /
• pp.342-347
• /
• 2003

It is essential to develop an algorithm for the estimate of link travel velocity and for the supply and control of travel information in the context of intelligent transportation information system. The paper proposes the fuzzy logic based prediction of link travel velocity. Three factors such as time, date and velocity are considered as major components to represent the travel situation. In the fuzzy modeling, those factors were expressed by fuzzy membership functions. We acquire position／velocity data through GPS antenna with PDA embedded probe vehicles. The link travel velocity is calculated using refined GPS data and the prediction results are compared with actual data for its accuracy.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.184.2-184.2
• /
• 2012

위성의 전장품은 전기적 접속을 위해서 1:1 연결을 하는 Point-to-Point 버스 방식과 여러개의 Slave (Remote Terminal)을 갖고, 일반적으로 1개의 Master (Controller)에 의해서 연결하게 되는 버스 구조를 갖는 접속 채널을 통해서 연결이 된다. 가장 많이 사용되는 방식인 MIL-STD-1553B는 데이터 전송속도가 1Mbps이고, Transformer에 의해서 완전하게 버스와 각 전장품이 완전하게 절연이 되는 구조로, 전기적 고장이 전달되는 것을 방지할 수가 있지만, 설계의 난이도가 높다. 고속 버스는 SpaceWire를 사용하고, 100Mbps이상의 속도를 지원할 수가 있지만, LVDS등의 고속 채널 설계 및 노이즈에 민감한 특성 때문에, 저속의 통신채널에서는 사용하기 어렵다. 저속의 데이터 채널을 위해서는 UART 방식이 사용된다. UART 방식은 RS-422 방식과 RS-485 방식이 사용되지만, 1553B 또는 SpaceWire 등과 같이 프로토콜이 정해지지 않아서, 사용자가 직접 프로토콜을 지정해야하는 문제가 있다. 또한 RS-422은 1:1 방식의 Point-to-Point UART를 위해서 사용되고, RS-485는 버스 방식의 연결을 지원할 수가 있지만, 동시에 여러개의 TX가 enable되는 경우에는 TX사이에 고장을 일으킬 수 있어서, 1번에 TX가 1개만 사용되도록 제어할 필요가 있다. 또한 RS-485방식의 버스를 구현할 경우에는 1553B처럼 와전하게 절연이 불가능하므로, 전기적이나 기능적으로 485버스에 문제가 발생할 경우에 절연과 같은 기능이 지원되도록 구현이 되어야 한다. 본 논문에서는 안정적인 485 UART버스 구현을 위한 기술에 대해서 평가하고 분석하도록 하겠다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.105-108
• /
• 2008

Nowadays, as there is so much interest in environment, hydrogen peroxide attracts attention as an eco-propellant. Hydrogen peroxide is widely used for mono-propellant of thruster, and oxidizer of bi-propellant rocket. Especially, it is used as mono-propellant of the thruster for attitude control of satellite and military weapons. So, the need of long time storage of hydrogen peroxide appears and storage test is required. In this paper, necessity of storage test of hydrogen peroxide and some conditions and methods are introduced. In addition, the results of storage tests under some condition are compared and analyzed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.340-340
• /
• 2019

지구온난화로 유발되는 기후변동성이 증가함에 따라서 정확한 수문인자의 예측은 전 세계적으로 주요 관심사항이 되고 있다. 최근에는 고성능 컴퓨터 자원의 증가로 수문기상학 연구에서 동일한 학습량에 비하여 정확도의 향상이 뚜렷한 기계학습 구조를 활용하여 위성영상 기반의 대기예측, 태풍위치 추적 및 강수량 예측 등의 연구가 활발하게 진행되고 있다. 본 연구에는 기계학습 중 시계열 분석에 널리 활용되고 있는 순환신경망(Recurrent Neural Network, RNN) 기법의 대표적인 LSTM(Long Short-Term Memory) 네트워크를 이용하여 수문인자를 예측하였다. LSTM 네트워크는 가중치 및 메모리 요소에 대한 추가정보를 셀 상태에 저장하고 시계열의 길이 조정하여 모형의 탄력적 활용이 가능하다. LSTM 네트워크를 이용한 다양한 수문인자 예측결과 RMSE의 개선을 확인하였다. 따라서 본 연구를 통하여 개발된 기계학습을 통한 수문인자 예측기술은 권역별 수계별 홍수 및 가뭄대응 계획을 능동적으로 수립하는데 활용될 것으로 판단된다. 향후 연구에서는 LSTM의 입력영역을 Bayesian 추론기법을 활용하여 구성함으로 학습과정의 불확실성을 정량적으로 제어하고자 한다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.334-334
• /
• 2020

우리나라는 서울지역과 수도권 위성도시의 인구분포가 집중되어있으며, 도시지역에 대한 관거 우선 확충에 따라 하수처리구역의 비율이 점차 늘어나고 있다. 초기우수월류에 의한 오염은 비점오염원의 경우로, 발생 및 배출경로가 다양하고 불특정하게 발생한다. 비점 오염원의 유출 농도는 강우 초기에 높게 나타나고, 점차 농도가 낮아지는데, 이러한 강우 특성을 고려하여 오염발생량을 규명하는 것이 필요하다. 이에 따라 본 연구에서는 중랑천 의정부 지역을 대상지역으로 선정하여, 합류식 하수관거 월류부하를 하수도법 관리수준으로 제어하기 위한 초기우수 처리대상 강우량을 산정하고 강우분포형 및 토지이용도 현황별로 초기월류유량 및 부하특성을 검토하였다. 본 연구에서는 SWMM(Strom Water Management Moder)모형을 적용하여, 매년 홍수기에 발생할 수 있는 다양한 강우분포를 고려하여 대상유역의 토지용도별 합류식 처리구역에 대하여 SWMM 모형의 검·보정 절차를 통해 예측값과 측정값 사이의 상관관계를 분석하였고, 의정부 지역의 초기우수월류 오염부하량의 토지용도에 따른 경향성과, 강우량 및 강우분포, 배수면적에 따른 경향성을 비교하였다.

• Korean Journal of Remote Sensing
• /
• v.14 no.3
• /
• pp.213-222
• /
• 1998

Electro-Optical Camera(EOC) is the main payload of the KOrea Multi-Purpose SATellite(KOMPSAT) with the mission of cartography to build up a digital map of Korean territory including a Digital Terrain Elevation Map(DTEM). This instalment which comprises EOC Sensor Assembly and EOC Electronics Assembly produces the panchromatic images of 6.6 m GSD with a swath wider than 17 km by push-broom scanning and spacecraft body pointing in a visible range of wavelength, 510~730 nm. The high resolution panchromatic image is to be collected for 2 minutes during 98 minutes of orbit cycle covering about 800 km along ground track, over the mission lifetime of 3 years with the functions of programmable gain/offset and on-board image data storage. The image of 8 bit digitization, which is collected by a full reflective type F8.3 triplet without obscuration, is to be transmitted to Ground Station at a rate less than 25 Mbps. EOC was elaborated to have the performance which meets or surpasses its requirements of design phase. The spectral response, the modulation transfer function, and the uniformity of all the 2592 pixel of CCD of EOC are illustrated as they were measured for the convenience of end-user. The spectral response was measured with respect to each gain setup of EOC and this is expected to give the capability of generating more accurate panchromatic image to the users of EOC data. The modulation transfer function of EOC was measured as greater than 16 % at Nyquist frequency over the entire field of view, which exceeds its requirement of larger than 10 %. The uniformity that shows the relative response of each pixel of CCD was measured at every pixel of the Focal Plane Array of EOC and is illustrated for the data processing.