• Journal of Satellite, Information and Communications
• /
• v.11 no.4
• /
• pp.15-20
• /
• 2016

In this paper, we developed the hardware GPS signal generator for generating a GPS L1 meaconing signal with Live GPS signal signals and analyzed the performance of meaconing signal generator thorough the experiment. Deception of the signal, such as a re-broadcast, it is an object of the user to provide false information so as not to receive location information and accurate time. The signal just rebroadcast has the features that can be easily deceive the receiver via a delay of no received signal to the signal processing through an antenna. In this paper, the hardware for generating a signal only these rebroadcast designed and manufactured, by re-sending the received Live GPS signals, to confirm the effect of the receiver. The maximum delay time is possible up to about 2.6msec, also, has been successfully tested to be moved to the position of re-broadcasting based on maturity antenna the position of the receiver through a spaced antenna.

• Journal of Satellite, Information and Communications
• /
• v.7 no.3
• /
• pp.99-104
• /
• 2012

The United States will proceed with the effort to modernize the GPS system, and one of its main content is to provide L5 signal. L5 will be transmitted in a radio band reserved exclusively for aviation safety services. And, L5, in combination with L1, will improve the position accuracy via ionospheric correction and robustness via signal redundancy. However, The acquisition processing time of L5 takes longer than that of L1 as the code length of L5 is 10 times longer than that of L1. To reduce this acquisition processing time, a higher number of correlators in the aquisition module should be used. However, there is a problem that this causes increase in the complexity of the correlator configuration and the computation power. So, in this paper, we propose L5 signal tracking scheme using tracking results in the GPS L1/L5 receiver. The proposed scheme could reduce the hardware complexity as the GPS L5 signal acquisition module is not needed, and provide fast and stable tracking of L5 signal by aiding L1 tracking results such as PRN, the code phase synchronization, and the Doppler frequency. The feasibility of the proposed scheme is demonstrated through simulation results.

• Journal of Astronomy and Space Sciences
• /
• v.25 no.1
• /
• pp.43-52
• /
• 2008

As the next generation of global satellite navigation system, the Galileo project is about to witness an initial orbit validation stage as the successful test of navigation message transmission from Giove-A in 2007. The Space Geodesy division ana the Radio Astronomy division of the Korea Astronomy & Space Science Institute had collaborated on the field survey for the Galileo Sensor Station (GSS) RF environment of the proposed site near Jeju Tamla University from August 3rd to August 5th, 2006. The power spectrums were measured in full-band $(800{\sim}2000MHz)$ and in-band (E5, E6 and L1 band) in frequency domain for 24 hours respectively. Finally, we performed a time domain analysis to characterize strong in-band interference source based on the result of the previous step.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.12
• /
• pp.1112-1115
• /
• 2016

Global Positioning System(GPS) is a useful system used in both civilian and military applications. However, the signal of GPS is susceptible to jamming attacks due to low receive sensitivity, since the signals come from the satellite located at over 20,000 km above the earth. In this paper, we have conducted a preceding research on a non-Foster matching circuit that efficiently matches an electrically ultra-small GPS antenna. Electrically Small Antennas(ESAs) are inefficient radiators and are difficult to match in wideband due to extremely high quality factor. In order to match small GPS antenna in wideband, a non-Foster matching circuit for a small GPS antenna was designed. A negative impedance converter circuit consisting of Linvill's cross-coupled pair transistors was fabricated and its stability was verified by the time-domain stability analysis. In addition, anechoic chamber measurements show that the non-Foster matching circuit for small GPS antenna can lead bore-sight gain improvement by more than 17 dB.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.4
• /
• pp.375-381
• /
• 2002

Depth of water information is obtained mainly from echo-sounding instrument which observes the round-trip time of signal from water surface to the bottom. Photogrammetry, underwater survey and laser survey etc. are also used as another method of bathymetric surveying. These methods are used specially for making track chart in a shallow water area. On the other hand, aircraft or satellite imagery ara also used in the sea area where the effect of suspended material is low and water quality is good. Presently, general bathymetric surveying has been performed in our country, but the spatial density of surveyed point are relatively low. Therefore, in this study we built a grid water depth chart which measured combing echosounder with GPS-RTK method and the depth accuracy was analyzed by using the data of direct survey water depth. As a results, the bathymatric mapping which use echosounder is more economical method compared to the existing methods.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.2
• /
• pp.113-118
• /
• 2013

In this paper, spoofing effects on a GNSS receiver were analyzed. The spoofer (spoofing device) was classified to two categories. One is an active spoofer and the other is a passive spoofer. The active spoofer was considered for analysis. For the analysis of spoofing effects on a GNSS receiver, a real-time GNSS spoofing simulator was developed. The simulator was consisted with two parts which are a baseband signal generation part and a RF up-conversion part. The first GNSS baseband signal was generated according to spoofing parameters such as range, range rate, GNSS navigation data, spoofing to GNSS signal ratio, and etc. The generated baseband signal was up-converted to GNSS L1 band. Then the signal transmitted to a GNSS signal. For a perfect spoofing, a spoofer knew an accurate position and velocity of a spoofing target. But, in real world, that is not nearly possible. Although uncertainty of position and velocity of the target was existed, the spoofer was operated as an efficient jammer.

• Aerospace Engineering and Technology
• /
• v.13 no.1
• /
• pp.1-9
• /
• 2014

Goheung aeronautical center is located in the area of Goheung of which land is reclaimed from sea and has a runway of length 700m, width 25m with test facility which has been used for flight test of UAV and small aircraft. To support the enhancement of aircraft safety, 1090ES ADS-B ground system as the ground surveillance system has been implemented. ADS-B system based on GPS and digital data link provides the function of enhancing the aircraft safety through flight information among aircrafts. This paper gives the result that the implementation of ADS-B ground system and the flight test with onboard ADS-B transmitter has been conducted.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.06a
• /
• pp.57-58
• /
• 2012

위성항법중앙사무소는 다수의 DGNSS 기준국을 운영하고 있으며, 이 중 일부 기준국은 타 기준국에 비해 TEQC 품질평가 결과가 저조하다. 이에 이 연구는 TEQC 품질평가가 상대적으로 불량한 충주기준국을 대상으로 비교실험을 수행한다. 이전에 다른 관측장비를 이용하여 수행한 동시 관측에서는 TEQC 품질평가가 다른 기준국과 유사한 수준으로 나타나 지형이나 전파방해 등과 같은 주변 환경적인 요인은 아닌 것으로 확인하였다. 이번 충주비교실험은 기존 설치된 관측장비의 이상유무를 고려하여 크게 세 부분으로 나누어 진행한다. 안테나 이상판단은 기존 관측기기에 다른 기종의 안테나로 교체하여 확인하고, 수신기 이상 유무는 분배기를 이용하여 두 수신기에 동시 관측값을 기록하여 판단한다. 마지막으로 케이블의 경우, 상위 두 실험을 통해 수집된 관측자료의 품질평가를 통해 확인 가능하다. 이 연구를 통하여 TEQC 품질평가 저하요인을 확인하고 개선방안을 제시하여 양질의 DGNSS 정보를 제공할 수 있을 것으로 판단된다.

• Annual Conference of KIPS
• /
• 2016.10a
• /
• pp.783-784
• /
• 2016

천공위치 안내 시스템은 천공작업 Hole의 정확한 위치를 추적하는 시스템이다. 천공작업의 정확성과 안정성, 그리고 장비 조작의 용이성을 위하여 범지구 위성 항법 시스템(Global navigation satellite system, GNSS)을 이용하여 지표면의 천공위치를 찾아주는 안내 시스템을 연구 개발하였다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.06a
• /
• pp.29-30
• /
• 2011

GNSS 시스템의 다원화에 따른 DGPS RSIM 기능도 DGNSS 체제로 기능적, 시스템적 고도화가 필요한 시점이 도래하고 있다. 이와 관련하여 차세대 DGNSS RSIM 아키텍처를 미국 해양경비대(USCG) NAVCEN에서 제안하였는데, 이 차세대 DGPS RSIM 아키텍처의 기본 요구조건은 PC 플랫폼 기반의 신규 신호 및 기술에 대한 충분한 유연성을 확보할 수 있고, 기존 사용자 수신기와 기존 기준국 시스템과의 충분한 호환이 가능해야 한다는 것이다. 그러나 위의 제시된 아키텍처는 DGPS RSIM 시스템의 소프트웨어 응용에 초점이 맞추어져 있어서 GNSS 다원화에 따른 DGNSS 기준국 기능 고도화에 한계가 있다. 그러므로 본 논문에서는 소프트웨어 DGNSS RSIM 개발을 위한 후속연구로서, 현재 운영 중인 GPS/GLONASS를 중심으로 보정정보 생성 및 그 측위정확도 성능분석에 중점을 두고자 한다. 기 설계된 DGNSS 소프트웨어 RSIM 아키텍처에 대해 설명하고, 설계된 아키텍처와 통합보정정보 생성 및 처리 기법이 적용된 GPS/GLONASS 통합보정시스템을 구현하여, 향후 소프트웨어 DGNSS RSIM을 위한 측위정확도 측면에서의 성능을 분석한다.