• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1997.11a
• /
• pp.1-2
• /
• 1997

인공위성용 추력기는 위성의 자세제어 및 궤도조정용 소형 액체추진기관으로서 개발기술은 인공위성 그 자체는 물론 위성 발사체와 유도 미사일의 추진기관에 이르기까지 다양하게 확장 적용할 수 있는 핵심 기반기술이다. 때문에 선진국으로부터의 기술 이전을 기대하기 힘든 품목으로, 자체 개발을 통해 위성이나 유도무기에 장착 운용시험을 하기에도 막대한 비용 때문에 회피되고 있는 실정이다. (주)한화는 정부에서 국책과제로 추진하고 있는 KOMPSAT 위성 개발사업에 참여하여 소형 액체 추진기관인 단일 추진제 추력기의 개발을 추진하였다 1994년 11월 사업착수 이래 미국 TRW사로부터 추력기 설계, 해석 및 제작 기술을 이전 받았으며, 추력기 제작/시험 시설을 완공하여 TRW사의 제품 품질 요구조건(product assurance requirements)에 의거 제작에 착수하였다. 현재 총 8세트의 이중 추력기 모듈(dual thruster module)을 제작 납품하였으며 또한 추력기 자체의 핵심 부품을 원부자재 가공으로부터 제작하고 이의 인증 시험을 성공적으로 완료하였다. 현재 국산화 추력기를 KOMPSAT 위성에 장착하기 위한 이중 추력기 모듈 제작이 진행 중에 있다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1944-1946
• /
• 2008

본 논문에서는 통신해양기상위성의 추력기 구동장치에 대하여 기술하였다. 위성에서는 위성체 전력공급을 위한 태양전지판, 위성의 자세제어를 위한 모멘텀 휠과 추진계, 온도제어 등을 담당하는 다양한 추력기 (actuator)가 존재한다. 위성의 안정적인 동작을 위해 각각의 추력기를 제어하기 위한 전기 및 기계 접속 요구사항을 수용하는 인터페이스 기능을 담당하는 추력기 구동장치 (Acutator Drive Electronics, ADE)가 필요하다. 통신해양기상위성의 추력기 구동장치는 안정적인 동작을 위해서 1개의 ADE5 구조체 안에 ADE5 A와 ADE5 B가 중복되어서 구현되었다. ADE5는 ADE5 A와 B가 수동적 중복구조를 갖지만, 추력기와 ADE5 A, B가 상호연결되어 있어서 위성의 상태에 따라서 2개의 ADE5 A, B가 혼합적으로 사용될 수 있다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.2
• /
• pp.147-158
• /
• 2020

In this paper, we will review the thruster based reaction wheel momentum dumping method for low Earth orbit satellite. Thruster based momentum dumping is widely used in GEO satellites by performing momentum dumping and attitude control using thrusters at the specific time. LEO satellite should perform momentum dumping at any time, thus it is not appropriate to use GEO satellite's momentum dumping method. In this research, we will review the method for LEO satellite, which perform momentum dumping always and use reaction wheels for attitude control during dumping. To reduce thruster's valve on and off counts, we propose to use the maximum pulse width for thruster operation. To prevent attitude error increase by thrusters, we adjust the thruster operation interval. Through simulation, we verify the proposed method's effects.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.753-756
• /
• 2017

With the advancement of technology, miniaturization, integration, and weight reduction have become possible, and the existing medium and large satellites have been replaced by small satellites, and the need for a micro thruster has emerged. Laser ablation micro-thruster is a new type thruster using laser ablation. It is emerging as a new candidate in micro-thrusters with wide thrust range and low single impulse thrust. The objective of present study is to introduces the structure, propellant, and research trends of the laser ablation micro-thruster.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.1
• /
• pp.98-106
• /
• 2018

With the advancement in technology, miniaturization, integration, and weight reduction of satellite components have become possible. In this regard, existing medium and large satellites have been replaced by small satellites. As the demand for small satellites increases, the need for micro-thrusters has emerged for precise attitude and position control. A laser ablation micro-thruster, which generates thrust by using ablation jets that offer a wide range of thrusts and low-impulse thrusts, is considered as an alternative for micro-thrusters in small satellites. The objective of the present study is to introduce configurations of the laser ablation micro-thruster and its research trend.

• Aerospace Engineering and Technology
• /
• v.2 no.2
• /
• pp.96-104
• /
• 2003

Geostationary satellite propulsion system provides satellite with the velocity increment for attitude control operations and sationkeeping operations from satellite launch to de-orbit at the end of life. Today, various types of propulsion system and its thrusters are produced by worldwide manufactures. Therefore, geostationary satellite manufacturers give significant modification to the Mission Analysis Software whenever different type of propulsion system type is adopted. Mission Analysis Software is a tool for planning and verification of satellite mission. For the development of the Generalized Mission Analysis Software, many thrusters are carefully investigated and modeled.

• Aerospace Engineering and Technology
• /
• v.5 no.2
• /
• pp.114-118
• /
• 2006

This paper describes the thrusters configuration optimized in preliminary performances for COMS (Communication, Ocean and Meteorological Satellite). The exact values of the thrusters tilt angles must be frozen for the manufacturing of COMS platform based on the EUROSTAR 3000 platform as these angles depend on the spacecraft center of mass position and thrusters location, the definition process has to be performed specifically for COMB. Concerning pitch control thrusters (6, 7), South thrusters (1, 2, 3), and East/West thrusters (4. ~, their optimum positions and force orientations based on the thrusters A/B middle position and MOL (Middle Of Life) are obtained. The torques of thrusters (plume and geometrical torques) are minimized to improve the preliminary performance of thrusters.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.2
• /
• pp.195-200
• /
• 2011

A low power Hall thruster is under development for orbit maintenance of a small Earth observing satellite. Both cylindrical and annular type thrusters were manufactured and tested to characterize the performance of cylindrical Hall thrusters. Results were described through comparative analyses. Cylindrical thrusters were manufactured in two different channel diameter dimensions, 28 mm and 50 mm. Thrust, ion velocity and ion current were measured in various operating conditions. The results show that cylindrical thrusters are more efficient in mass utilization and voltage utilization, but less efficient in current utilization than annular one.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.2
• /
• pp.165-171
• /
• 2016

The attitude control, station keeping and wheel off-loading at GEO-KOMPSAT-2 are realized by thrusters firings. Thrusters 1, 2 and 3 are mounted on the same axis as the solar array, which generates the plume disturbance largely. Therefore the effect of plume disturbance should be analyzed from satellite design phase. In this paper, we described the calculation method of plume disturbance and analyzed the plume disturbance of thruster 1,2 and 3 using GEO-KOMPSAT-2 initial configuration.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.298-302
• /
• 2009

Low power Hall thruster is under development as one of the core technologies for STSAT-3. The Hall thruster has several advantages such as its simple structure, high thrust density and specific impulse etc. Development target values deduced by analyzing requirements are consumed electrical power, thrust, thrust efficiency, and specific impulse of < 300 W, > 10 mN, ~ 35%, and > 1000 s, respectively. In order to achieve the target specifications, two prototype Hall thrusters were developed and compared. To date, thrust and efficiency are 11 mN and 37% under the total power of 290 W with 0.97 mg/s Xe propellent supply.