• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.2
• /
• pp.196-206
• /
• 1999

In this paper, we have estimated the interference effects between the NGSO/MSS system and the fixed-service M/W system for sharing the NGSO/MSS system into the frequency band operated by the existing M/W system. Between above two systems, the interference effects must be analyzed in the following three points. That is, PFD(Power Flux Density) level must be obtained in the case of the interference from NGSO satellites into M/W stations, C/I(Carrier-to-Interference Ratio) and the coordination contour in the case of the interference between NGSO/MSS feeder link and a M/W station, and the interference power level and coordination contour in the case of the interference between NGSO/MSS service link(handsets) and M/W stations. Therefore, in order to obtain above three criteria, we have developed the analytical model, introduced the related equations and estimated the system performance by means of the simulation and the theoretial analysis. It is expected that the results will be utilized in setting the criterion for sharing between the NGSO/MSS system and the M/W station.

• Journal of Satellite, Information and Communications
• /
• v.4 no.2
• /
• pp.12-19
• /
• 2009

In the modern UAV systems, the role of radar payload has been increasing with its unique performance of day-and-night operation and see-through capability over hidden obstacles. Contrary to the satellite reconnaissance, UAV is expected to provide high resolution target detection and recognition capability while frequent flight missions would deliver enhanced SAR image and local information over the target area. STK(Satellite Tool Kit) is a professional space-analysis software widely used in all phases of a space system's life cycle. The simulation of STK is efficient and accurate relatively. In this paper, the author attempt to model the UAV operation and measure the expected SAR image quality. STK(Satellite Tool Kit) is employed to analyze UAV operation and produce SAR raw data. A SAR simulator is developed to produce high resolution SAR image for various ground targets.

• Journal of Advanced Navigation Technology
• /
• v.12 no.6
• /
• pp.539-547
• /
• 2008

In this paper, preliminary results for design of prototype ADS-ADS-B/TIS-B Validation Testbed (AVT) are described. Automatic Dependent Surveillance (ADS-B) is a novel surveillance concept using the Global Navigation Satellite System (GNSS) and a digital datalink. Air traffic information from ADS-B non-equipped aircraft is not acquired since ADS-B is a dependent surveillance. Traffic Information Service-Broadcast (TIS-B) provides surveillance data from Secondary surveillance Radar (SSR) for ADS-B non-equipped aircraft. AVT is based on ADS-B and TIS-B as an integrated platform for air traffic surveillance system for CNS/ATM.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.9
• /
• pp.830-837
• /
• 2015

Space debris has been a major issue recently for the space-active nations because its growing population is expected to increase the collision risk with operational satellites. Radar and electro-optical system has been used for space debris surveillance, which may cause unnecessary anti-collision manoeuvers due to their low tracking accuracy. So an additional tracking system is required to improve the predicted orbit accuracy and then to jude the anti-collision maneouvers more efficiently. The laser tracking system has been considered as an alternative to decrease these unnecessary manoeuvers. Korea Astronomy and Space Science Institute has been developing a space object laser tracking system which is capable of laser tracking for satellites with retro-reflectors and for space debris using high power laser, and satellite imaging using adaptive optics. In this study, the tracking capability is analyzed for space debris using high power laser based on link budget, false alarm probability and signal detection probability.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.10
• /
• pp.1990-1998
• /
• 2017

The success of naval operation prioritizes the implementation of a robust communication network that delivers accurate and prompt communications to one another. The satellite, which is the main communication network of the military, is required to construct a preliminary communication network because of the enemy radio disturbance and weak point of fixed antenna. The military operational communication network has been in transition from voice-centered wireless communication network to text message-based communication network. In this paper we suggest an enhanced communication method built on Roll Call, the main communication method of ROK Navy operating tactical data link called Link-11. Simulation results display that the proposed method reduces the transmission time per unit frame by 4.3 times compared to the Roll Call and 6.3 times compared with the Round Robin & Broadcasting; it is also proved that the higher the direct reception rate, the shorter the transmission time required by 1.6 times maximum.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.2
• /
• pp.179-192
• /
• 2019

Additional frequencies are allocated in maritime digital data exchange to alleviate overload of the VHF data link. The shipborne ad-hoc network (SANET) for this frequencies was subsequently proposed, which provides various IP-based services to ships on behalf of satellite communications. In SANET, a ship should determine its own IP address to achieve IP connectivity to the shore. Accordingly, this paper proposes a SANET configuration (SANETconf) protocol as an IP configuration protocol. SANETconf propagates non-overlapping IP addresses across the network from the shore to ships. A ship obtains its IP address by exchanging Request and Response messages with its neighbors. Therefore, SANETconf eliminates the process of DAD and managing the movement of ships. Extensive simulations were performed to verify the applicability of SANETconf. Based on results, 85% of the ships can determine their own IP address within one frame. Also, SANETconf has a high resource efficiency by using 0.024 percent of resources for IP configuration.

• Journal of the Korea Society for Simulation
• /
• v.28 no.4
• /
• pp.33-43
• /
• 2019

Link-16 is a data link that provides joint interoperability to the US Navy, Air Force and NATO. Currently, the military relies entirely on foreign SW and tools for test environment, tactical simulation training and interoperability verification test for Link-16 operation. Therefore, it is necessary to develop Link-16 based operation environment test tool. In this paper, Link-16 network operational performance analysis simulator was developed by analyzing the function of Link-16 foreign tools. It also implements the SIMPLE standard interface for interworking with foreign SW and tools. The functional model for Link-16 network operation performance analysis consists of pre-analysis, real-time operational analysis, and post-analysis functional model. Each functional model test was performed through SIMPLE interworking with foreign SW and tools. Link-16 network operation performance analysis If we replace foreign SW through simulator, we can perform tactical training, network design verification and operation (scenario) verification for our military.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.3
• /
• pp.27-33
• /
• 2009

Content used in mashups is typically obtained from a third party source through a public interface or API (web services). Other methods of obtaining content for mashups include Web feeds (e.g. RSS or Atom), and screen scraping. A mashup or meshup Web application has two parts: A new service delivered through a Web page, using its own data and data from other sources. The blended data, made available across the Web through an API or other protocols such as HlTP, RSS, REST, etc. There are many types of mashups, such as consumer mashups, data mashups, and Business Mashups. The most common mashup is the consumer mashup, which are aimed at the general public. Examples include Google Maps, iGuide, and RadioClouds. 4D Wall-map display is data mashups combine similar types of media and information from multiple sources into a single representation. This technology focus data into a single presentation and allow for collaborative action among ITS-related information sources.

• Journal of KIISE
• /
• v.44 no.5
• /
• pp.476-485
• /
• 2017

The tactical operation centers of future anti-aircraft missile systems provide the environment for the research on future air threats, tactical information, integrated battlefield environment creation and management, engagement control and command and control algorithms. To develop the key functional elements of integrated battlefield situation creation and processing and tactical operation automation processing operations, battery/battalion tactical operation control and reconfiguration design software are required. Therefore, the algorithm software of each function and the tactical operation display software and link software for interworking between equipment were developed as reconfigurable through a data-centric design. In this paper, a tactical operation display framework that can be reconfigured on the operation display of the tactical operations according to the battery/battalion is introduced. This tactical operation display framework was used to develop a common data model design for the reconfigurable structure of multi-role tactical operations with battery / battalion and mission views, and a display configuration tool that provides a tactical operation display framework for view development was also developed using the MVC pattern. If the tactical operation display framework is used, it will be possible to reuse the view design through the common base structure, and a view that can be reconfigured easily and quickly will also be developed.