• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.2
• /
• pp.171-177
• /
• 2012

In this paper, we proposed a algorithm and an operation boundary for fault detection of a onboard GNSS receiver. After aircraft exchange corrections computed by an aircraft receiver, a faulty aircraft receiver is detected by checking consistency of correction. For this purpose, PRC residual is used as the test statistic for fault detection of the onboard GNSS receiver. And operation boundaries are set by using DGPS position error increase with respect to the distance from a reference station. If the fault detection is performed by using aircraft only in operation boundary, the more accurate fault detection can be possible.

• Journal of Astronomy and Space Sciences
• /
• v.21 no.2
• /
• pp.109-120
• /
• 2004

STSAT-1 was launched on sep. 2003 with the main payload of Far Ultra-violet Imaging Spectrograph(FIMS). The mission of FIMS is to observe universe and aurora. In this paper, we suggest a simple and reliable strategy adopted in STSAT-1 to synchronize time between On-board Computer(OBC) and FIMS. For the characteristics of STSAT-1, this strategy is devised to maintain reliability of satellite system and to reduce implementation cost by using minimized electronic circuits. We suggested two methods with different synchronization resolutions to cope with unexpected faults in space. The backup method with low resolution can be activated when the main has some problems.

• Journal of Satellite, Information and Communications
• /
• v.11 no.2
• /
• pp.29-35
• /
• 2016

High-availability seamless redundancy (HSR) is a fault-tolerant protocol for Ethernet networks that provides two frame copies for each frame sent. Each copy is forwarded on a separate physical path. HSR is a potential candidate for several fault-tolerant Ethernet applications, including smart-grid communications. However, the major drawback of the HSR protocol is that it generates and circulates unnecessary frames within connected rings regardless of the presence of a destination node in the ring. This downside degrades network performance and can deplete network resources. Two simple but efficient approaches have previously been proposed to solve the above problem: quick removing (QR) and port locking (PL). In this paper, we will present a hybrid approach, QRPL, by combining QR with PL, resulting in further traffic reductions. Our analysis showed that network traffic is significantly reduced for a large-sized HSR connected ring network compared to the standard HSR protocol, QR, and PL.

• Aerospace Engineering and Technology
• /
• v.10 no.2
• /
• pp.56-64
• /
• 2011

In this paper, the characteristics of LCL set-up parameters for the satellite load distribution are analyzed under the electrical system environment, implemented the LCL circuits and evaluated the performance and its behaviour. Recently, it is implemented the load distribution circuit by latching current limiter(LCL) rather than conventional fuse and relay for the protection of the satellite power system from a fault load. The LCL circuit is composed of the electrical components, not mechanical parts with the fuse and relay. When detected the over current on a fault load, it is activated to maintain the trip-off level for set-up time and then cut-off the load power by the active control. It is more flexible and provided a chance to reuse of the load in case of temporarily event, but the fuse and relay can't be used again after activating due to the physical disconnection. However, for implementation of LCL circuit, it should be carefully considered the behavior of the LCL circuit under the worst electrical system environment and applied it to define the set-up parameters related with over-current inhibition.

• Journal of Advanced Navigation Technology
• /
• v.12 no.4
• /
• pp.295-303
• /
• 2008

Malfunction of satellite launch vehicles with high speed and long range can be a major concern for operations. Flight safety system that monitor the trajectory and identify any failure of the launch vehicles. Tracking filters for the flight safety systems are different from common tracking filters since filter reliability is more emphasized than accuracy. Reliable estimation of instantaneous impact points requires reliable velocity estimates as well as reliable position estimates. A fusion filter for a flight safety system was developed with the tracking sensor models for the Korea Satellite Launch Vehicle I. The fusion filter performances were evaluated by analyzing the trajectory and instantaneous impact point estimates.

• Journal of Aerospace System Engineering
• /
• v.18 no.1
• /
• pp.11-20
• /
• 2024

In the recent era of NewSpace, unlike high-reliability satellites of the past, low-reliability satellites are being developed and mass-produced at a lower cost to launch constellations satellites. To achieve cost-effective cluster satellite development, satellite users and developers need to assess the feasibility of maintaining mission performance over the expected lifespan when cluster satellites are launched. Plans for replacements due to random failures should also be established to maintain performance. This study proposed a method for assessing system reliability and availability to maintain mission performance and establish replacement strategies for Earth observation constellation satellites. In this study, a constellation reliability and availability model considering mission performance required for a satellite constellation, situations of satellite backup, and additional ground backups was established. The reliability model was structured based on the concept of a k-out-of-n system and the availability model used a Markov chain model. Based on the proposed reliability model, the minimum number of satellites required to meet mission requirements was defined and satellites needed in orbit during the required mission period to satisfy mission reliability were calculated. This research also analyzed the number of spare satellites in orbit and on the ground required to meet the desired availability during required service period through availability analysis.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.10
• /
• pp.51-59
• /
• 2003

A method of autonomous update is presented for onboard orbit propagator. On board propagator is an alternative means that could be used for navigation purpose in case of CPS receiver's failure. Although the ground station is not a able to upload a new propagator, the onboard propagator must be maintained most up-to-date. For this, a filtering technique is proposed wherein GPS data are effectively used to continuously update the on board propagator which was uploaded previously. Even if the ground station has generated the on board propagator based on the wrong information, the onboard propagator with updating scheme can automatically correct the errors in the coefficients of residual reconstruction function. Several scenarios were used to show the validity of the scheme for updating the onboard propagator using KOMPSAT-1 orbit data.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.4
• /
• pp.40-46
• /
• 2006

It is required to develop a highly reliable attitude & orbit control system of satellite that is less expensive as the technology of satellite design & integration is recently matured dramatically. To accomodate this kind of needs, the two axis attitude control method for wheel-based momentum-biased satellite system whose momentum bias vector points to a certain direction(sun direction), is developed using simple but reliable sensors and actuator: three axis magnetometer and coarse sun sensor are used as sensors, and magnetic torque bars are used as actuator. Classical PD type controller design methodologies are applied on a satellite system for the two axis control with the proper assumptions. Nonlinear simulation results are included to demonstrate the long term stability and the performance of closed-loop system design results.

• Current Industrial and Technological Trends in Aerospace
• /
• v.7 no.2
• /
• pp.121-130
• /
• 2009

In this paper, the attitude and orbit control subsystem technology of new GEO communication and observation satellite using Sun sensors are introduced and analyzed. COMS is new GEO communication and Earth observation satellite based on EUROSTAR 3000 space bus technology. The attitude and orbit control subsystem of COMS adopts a configuration using three BASS and three LIASS Sun sensors to acquire the attitude error information in the specific reference frames. These Sun sensors are used to acquire Sun direction and to control the spacecraft to keep the relative attitude with respect to a reference Sun direction in both transfer and operational orbits. In this paper, the mathematical models of BASS and LIASS are described as well as their operational implementation in the flight software.

• Aerospace Engineering and Technology
• /
• v.2 no.1
• /
• pp.44-53
• /
• 2003

The purpose of reliability prediction is to estimate the basic reliability and basic reliability and mission reliability of system and to make a determination of whether these reliability requirements can be achieved with the proposed design. Also, potential design weakness can be identified through the FMECA process. This technical memo summarizes the KOMPSAT-2 reliability and FMECA analysis results.