• Korean Journal of Optics and Photonics
• /
• v.18 no.5
• /
• pp.323-332
• /
• 2007

The effect of the reflectivity of both facets and the phase of a phase tuning section on the self-pulsation (SP) characteristics of multisection complex-coupled (CC) DFB lasers is investigated in terms of yield. The lasers are composed of two CC DFB sections and a phase tuning section between them. As the coupling strength and the coupling ratio (CR) decrease, the effect of the reflected fields from both facets and the other DFB section on the mode characteristics of one DFB section increases, so that the yield decreases. As the facet reflectivity increases, the maximum yield and the range of the phase of a phase tuning section with yield more than 60% decrease independent of the coupling strength and CR. The yield characteristics of CR=0.2 are better than those of CR=0.1 with the same coupling strength due to the larger complex coupling effect. The case with ${\mid}{\kappa}L{\mid}=3$ and CR=0.2 shows best yield characteristics among the cases considered in this work.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.11a
• /
• pp.72-73
• /
• 2010

본 논문에서는 안테나 당 전력제한 조건 하의 다중 입출력 빔포밍 시스템을 위한 위상 추적 코드북을 제안한다. 위상 추적 빔포밍 방식은 인접한 프레임 정보의 차이만을 활용한다는 점에서 기존의 위상 조정 방식과 차별화 되며, 궤환 정보량의 감소 이득을 얻을 수 있다. 이러한 위상 추적 코드북 구성을 위하여 위상 조정 코드북의 목적함수를 새롭게 변형하여 Lloyd-Max 알고리듬에 적용한다. 성능평가를 위하여 위상 조정 코드북과의 신호 대 잡음비의 비교 수행하며, 이를 이용하여 제안하는 코드북의 효율성을 입증한다.

• Journal of KSNVE
• /
• v.5 no.4
• /
• pp.453-460
• /
• 1995

본 논문에서는 정현파 소음을 제어하기 위한 filtered-x LMS에 바탕을 둔 새로운 적응 알고리듬을 제안하였다. 이러한 알고리듬은 두개의 연속적인 계수조정 식으로, 제어기의 계수를 조정한다. 서로 독립인 각 주파수별로 처리하기 때문에 빠른 수렴을 얻을 수 있다. 두번째식은 이차경로로 인한 위상지연을 추정한다. 정현 파 신호 주파수보다 4배 이상 빠른 표본화 주파수를 선택하여 추정된 위상지연 추정 값은 $2{\pi}f_0$만큼 오차를 나타내며, 이 값은 $\pi$2보다 작다. 정현파 신호의 주파수를 알면 이러한 오차는 $2{\pi}f_0$를 더함으로써 제거할 수 있다. 이러한 방법은 위상지연이 $\pi$2보다 큰 경우 수렴속도를 증가시킨다는 사실을 실험을 통하 여 알 수 있다. 추정된 위상지연은 제어기 계수값을 조정하는데 필요한 필터링된 참조신호를 발생시키믄데 사용된다. 참조신호의 위상지연이 각 주파수 성분별로 수행 되기 때문에, 콘볼루션 연산이 생략되어 계산량을 줄일 수 있다. 또한 연속적으로 위상지연을 추정하기 때문에 시변 상황에 적용이 가능하다. 조정식의 수렴조건을 유도하였다. 제안된 알고리듬은 제어기 계수를 추정하는데 바이어스가 없으며, 위상 지연추정을 위한 수렴상수의 최대허용치는 제어기계수에 대한 수렴상수에 반비례함을 이론적으로 분석을 통해 알 수 있다. 모의실험을 통하여 제안된 알고리듬이 filtered-x LMS 알고리듬에 바탕을 둔 다른 알고리듬보다 환경변화에 우수한 성능을 보임을 알 수 있다.

• Korean Journal of Optics and Photonics
• /
• v.17 no.6
• /
• pp.548-555
• /
• 2006

We investigate the effect of the reflectivity of both facets and the phase of a phase tuning section on the self-pulsation (SP) characteristics of multisection index-coupled (IC) DFB lasers composed of two index-coupled DFB sections and a phase tuning section between them in terms of yield. In the case of weak coupling strength, as the reflectivity of both facets increases, the effect of reflected fields from both facets and the other DFB section on the mode characteristics of one DFB section increases. Thus the number of mode hoping increases and yield decreases for the variation of phases of both facets. In the case of strong coupling strength, as the reflectivity of both facets increases, the spatial hole burning effect increases, so that the yield decreases. The maximum yield and the range of the phase of a phase tuning section with yield more than 40% decrease as the facet reflectivity increases irrespective of coupling strength. As the coupling strength increases, the variation of yield for the variation of the phase of a phase tuning section increases and the variation of the phase of a phase tuning section with the maximum yield for the variation of the reflectivity of both facets decreases. The yield characteristics of the cases with the coupling strengths of 2 and 3 are better than those with the coupling strengths of 1.2 and 4.

• Korean Journal of Optics and Photonics
• /
• v.19 no.3
• /
• pp.208-218
• /
• 2008

We investigate the effect in terms of yield of the reflectivity of both facets and of the phase of a phase tuning section on the self-pulsation (SP) characteristics of multisection complex-coupled (CC) DFB lasers with self-pulsation frequency of the THz region. When the grating phases on both facets of a multisection CC DFB laser are fixed as 0, the variation of SP frequency increases as the reflectivity of both facets increases, while that of SP frequency decreases as the coupling ratio (CR) and the coupling strength increase. For the coupling strength of 3, the range of the phase of a phase tuning section with yields greater than 80% decreases as the CR and the reflectivity of both facets increases. For the coupling strength of 4, the range of the phase of a phase tuning section with yields greater than 80% increases as the CR and the reflectivity of both facets increases.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.9
• /
• pp.847-851
• /
• 2011

In this paper, a novel IQ modulator that precisely controls the magnitude and phase of input signals is proposed. The proposed IQ modulator consists of low phase deviation attenuators, a splitter, and a combiner. In order to overcome the phase deviation characteristics found in conventional attenuators, a novel phase compensation technique has been adopted and mathematically analyzed. Linear vector arrays along the center point with large magnitude output signal variations in a full $360^{\circ}$ phase control are achieved on a polar plane by the proposed IQ modulator.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.3
• /
• pp.269-281
• /
• 2014

In this paper, a systematic design of a low phase noise voltage-tuned dielectric resonator oscillator(VTDRO) using loop group delay is proposed. Designed VTDRO is closed-loop type and consists of a cascade connection of a resonator, phase shifter, and amplifier. Firstly, a reference VTDRO is fabricated and its phase noise and electrical frequency tuning range are measured. Both the phase noise and electrical frequency tuning range depend on the loop group delay. Then, a required value of loop group delay for a new VTDRO with a low phase noise can be systematically computed. In addition, its phase noise and electrical frequency tuning range can be theoretically estimated using those obtained from the measurement of the reference VTDRO. When the loop group delay increases, the phase noise decreases and the electrical frequency tuning range also decreases. The former predominantly depends on the resonator structure. Therefore we propose a systematic design procedure of a resonator with high group delay characteristics. The measured loop group delay of the new VTDRO is about 700 nsec. The measured phase noise of the new VTDRO show a state-of-the-art performance of 154.5 dBc/Hz at 100 kHz frequency offset and electrical frequency tuning range of 448 kHz for a voltage change of 0~10V. The oscillation power is about 4.39 dBm.

• Korean Journal of Optics and Photonics
• /
• v.16 no.1
• /
• pp.85-98
• /
• 2005

As the number of compound cavity modes within the stopband of DFB sections decreases, the frequency of mode hopping decreases for the variation of $\Delta$λ$_{B}$, which represents the difference between the Bragg wavelengths of two DFB sections, so that the number of abrupt changes of pulsation frequencies decreases. In addition, the pulsation frequency varies continuously for the variation of the phase in a phase tuning section for a fixed $\Delta$λ$_{B}$. The number of compound cavity modes within the stopband decreases as the length of DFB sections increases and the length of a phase tuning section decreases. Thus stable self-pulsation operations for the variation of $\Delta$λ$_{B}$ and the phase in a phase tuning section could be obtained by proper selection of the coupling strength and the length of each section.ction.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.2
• /
• pp.38-44
• /
• 2002

The increasing use of non-linear loads such as power electronics draw highly distorted currents from the utility system High harmonics current, and voltages will cause equipment damage and disturb the plant operation. The application of phase shifting transformers can be a very cost-effective method of harmonic treatment where multiple harmonic sources ice in operation. In this paper simulation results used the EDSA harmonics analysis program verifying the effects of a phase shifting transformer for harmonic elimination are presented.

• Korean Journal of Optics and Photonics
• /
• v.16 no.6
• /
• pp.527-534
• /
• 2005

We investigate the pulsation characteristics in a multi-section DFB laser which is composed of one DFB section, phase tuning section, and gain section. Multi-section DFB lasers with anti-phase (AP) complex-coupled (CC) DFB structure show wide current ranges of gain and phase tuning sections fer stable pulsations compared to those with in-phase CC DFB structure or index-coupled DFB structure. For multi-section DFB lasers with AP CC DFB structure, the current range of a gain section for stable pulsations increases and the tuning range of the pulsation frequency increases as a coupling strength or a gain coupling coefficient increases Also, the tuning range using the phase variation in a phase tuning section increases. For a fixed coupling strength, the current ranges of gain and phase tuning sections for stable pulsations increase and the tuning range of the pulsation frequency increases as the length of a DFB section increases.