• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.8
• /
• pp.69-74
• /
• 2008

The propagation constant, which is defined for a double-positive (DPS) material of positive permittivity (${\varepsilon}'$) and permeability (${\mu}'$), is extended and derived for an epsilon-negative (ENG) material (${\varepsilon}'<0,\;{\mu}'>0$), a mu-negative (MNG) material (${\varepsilon}'>0,\;{\mu}'<0$), and a double-negative (DNG) material (${\varepsilon}'<0,\;{\mu}'<0$). By investigating how the permittivity loss (${\varepsilon}"$) and permeability loss (${\mu}"$) terms affect the propagation constant, we determine that the wave in the materials propagates as a right-handed (RH) triad or a left-handed (LH) triad. Regardless of the magnitudes of ${\varepsilon}"$ and ${\mu}"$, DPS and DNG materials become RH and LH media, respectively. However, ENG and MNG materials possess unusual characteristics that both materials become a RH medium when the sign of (${\varepsilon}'{\mu}"+{\varepsilon}"{\mu}'$) is positive and they become a LH medium when the sign is negative.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.4
• /
• pp.141-148
• /
• 2019

Electronic substrates used in a mobile device is composed of various materials, and when the temperature is changed during manufacturing or operating, thermal deformation and stress concentration occur due to the difference in thermal expansion coefficient of each material. The shadow moiré technique is a non-contact optical method that measures shape or out-of-plane displacement over the entire area, but it is necessary to overcome the Talbot effect for high sensitivity applications. In this paper, LED light sources of various wavelengths was used to overcome the Talbot effect caused in the shadow moiré technique. By using the phase shift method, an experimental method to retain the measurement sensitivity within 10 ㎛/fringe was proposed and evaluated, and this method is applied to the thermal deformation measurement of the mobile electronic substrate. In the case of using white light, there were several areas that could not be measured due to the Talbot effect, but in the case of using blue LED light, it was shown that a precise moiré pattern with a sensitivity of 6.25 ㎛/fringe could be obtained in most areas.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.12
• /
• pp.1245-1255
• /
• 2012

There are various anti-jamming algorithms for the GNSS system which is vulnerable to jamming, and the methods using array antenna show the best performance. Among them, the DOA estimation algorithms to identify the location of the jammer is very important. However, in case of the rotorcraft, the wireless channel which amplitude and phase changes with time is generated by the rotation of the rotor and it affects the performance of existing anti-jamming algorithms. In this paper, we modeled the effect of the rotor in four scenarios according to the correlation of antennas and assured that the performance of DOA estimation algorithms are degraded and saturated regardless of JNR due to the rotor effect. When we use the averaging method to solve this problem, the performance is improved as increasing samples for estimating. And in case of using moving average method with averaging, it shows similar performance. In addition, it reduces the required memory and moderates the variation of DOA estimation.

• Journal of KIISE:Software and Applications
• /
• v.27 no.4
• /
• pp.432-440
• /
• 2000

In this study, a new algorithm for canceling MRI artifact due to translational motion in image plane is described. Unlike the conventional iterative phase retrieval algorithm, in which there is no guarantee for the convergence, a direct method for estimating the motion is presented. In previous approaches, the motions in the x(read out) direction and the y(phase encoding) direction are estimated simultaneously. However, the features of x and y directional motions are different from each other. By analyzing their features, each x and y directional motion is canceled by different algorithms in two steps. First, it is noticed that the x directional motion corresponds to a shift of the x directional spectrum of the MRI signal, and the non-zero area of the spectrum just corresponds to the projected area of the density function on the x-axis. So the motion is estimated by tracing the edges between non-zero area and zero area of the spectrum, and the x directional motion is canceled by shifting the spectrum in inverse direction. Next, the y directional motion is canceled by using a new constraint condition, with which the motion component and the true image component can be separated. This algorithm is shown to be effective by using a phantom image with simulated motion.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.8 no.1
• /
• pp.37-43
• /
• 1996

Breaking waves were generated in a 2-D flume. A piston-type wavemaker was operated in accordance with signals which consist of elementary harmonics with appropriate phase differences. These phase differences were estimated by using a linear wave theory so that wave crests were to be concentrated at the same position. The stroke of wavemaker was controlled to create plunging-type breaking waves. The signal with small amplitude could not generate breaking waves. In the case of moderate amplitudes, various breaking waves could be obtained. Most of breaking waves were spilling type. Only when the wavemaker was operated with appropriate amplitude, plunging-type breaking waves were generated. The parameters of breaking waves are the wave steepness and the frequency bandwidth. If the central frequency was low, breaking waves were not generated. Based on experimental data, we found that the wave height of breaking inception was H = 0.0113 gT$^2$. We also made computations by using a mixed Euler-Lagrangian scheme under the assumption of potential flow. The numerical results show good agreements with tank measurements.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.3
• /
• pp.25-34
• /
• 2001

In this paper, discharge lamp ozonizer(DLO) of a new discharge type using superposition of gaseous electrical discharge for environment improvement was designed and manufactured. DLO is equipped with 3 electrodes(central ground electrode of discharge lamp type internal high voltage electrode of mesh type and external high voltage electrode of spiral type), and it is composed of double gap(gap between discharge lamp and internal electrode, gap between discharge lamp and external electrode). Internal and external electrodes are respectively applied AC high voltage which has 180[$^{\circ}$] phase difference. Ozone is generated by overlaying of each silent discharge which is respectively came from two gaps. At the moment discharge characteristics and ozone generation characteristics of DLO were investigated in accordance with quantity of supplied gas, discharge power and the number of DLO. When ozone generated by DLO was in contact with NO gas, removal characteristics was excellent, so it confirmed that DLO could be used as air environment improvement facility.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.241-246
• /
• 2004

Medical images are being managed more by PACS in general medical institutions. It is important to protect patients from being invaded their privacy related to the images. It is also necessary to confirm the ownership, the right of properity of the medical images and notice whether the data are modified. In this paper, we propose a robust watermarking against RST attacks in medical images on the PACS. The proposed scheme modifies and improves Log-Polar Mapping and Fourier Mellin Transform in order to realize and recover serious image degradation and watermark data loss caused by the conversion between cartesian coordinate and log-polar coordinate. We used the radius and theta Look Up Table to solve the realization of the Fourier Mellin Transform, and inserted a watermark into 2D-DFT magnitudes using Spread Spectrum. Experimental results shows that this method are robust to several attack.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.8
• /
• pp.1861-1868
• /
• 2014

In wireless communication systems, a frequency offset exist at the received signal due to the transmitter-receiver oscillator mismatch and Doppler effect in mobile environments. Those offsets rotate the received signal's phase and degrade the receiver performance. Hence, estimation and compensation of the frequency offset is crucial at the receiver. This paper proposes a new frequency offset estimation technique based on partial correlation. The proposed method requires less computational complexity than that of the conventional method. In addition, since the proposed one can estimate a wide range of frequency offset without estimation accuracy loss, the application of the method is desirable for the communication environments that have a large frequency offset. In order to verify the performance of our proposed scheme, a series of computer simulations have been carried out and compared against those of the conventional method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.5
• /
• pp.1138-1144
• /
• 2013

Cross-correlation functions of maximal period sequences have been studied for decades. In this paper, we find the cross-correlation values of non-linear sequences $S_a^r(t)=Tr_1^m\{[Tr_m^n(a{\alpha}^t+{\alpha}^{dt})]^r\}$ having the maximal period $2^n-1$ for Niho type decimation $d=2^{m-2}(2^m+3)$, where n=2m. In particular, we call d Niho type decimation in case $d{\equiv}1(mod\;2^m-1)$. And we analyze the cross-correlation distributions of $S_a^r(t)$ when the phase shift ${\tau}=(2^m+1)k(0{\leq}k{\leq}2^m-2)$ and provide experiment results.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.401-401
• /
• 2007

내장 전압의 측정은 전기흡수 방법과 변조 광전류 분광학을 이용하는 방법이 있으며, 우리는 이 논문에서 변조 광전류 분광학을 사용하여 내장 전압을 측정하였다. 소자에 인가 전압이 영일 때 양극과 음극의 일 함수 차이 때문에 내장 전압이 존재하며, 그로 인해 내장 전기장이 생긴다. 유기 발광 소자의 광전도도는 엑시톤이 자유전자와 정공으로 분리들 때 발생한다. 이 때 발생되는 광전류와 광전류의 위상 변화를 측정하여 내장 전압을 추정한다. 소자의 구조는 두 전극 사이에 단층으로 하여 만들었으며 모든 소자의 $Alq_3$ 두께는 150nm로 하고, 양극은 ITO를 사용하였고 음극은 Al과 LiAl을 100nm 두께로 하였다. 내장 전압의 측정 결과 ITO/$Alq_3$/LiAl의 내장 전압은 0.9eV로 측정된 데 반해 ITO/$Alq_3$/LiAl은 1.6eV로 측정되었다. 따라서, LiAl을 사용한 소자의 경우 Al을 사용한 소자에 비해 내장 전압이 0.7eV 증가되었다. 이는 LiAl의 일함수가 Al보다 낮은 값을 갖는 것과 일치하는 결과이다. 이런 결과가 나온 까닭은 LiAl을 음극으로 사용한 경우에는 자유로운 $Li^+$이 발생하여 유기물에 더 좋은 전자주입이 되도록 하여 소자의 전자 장벽을 낮추었기 때문에 전자의 주입이 활발하여 광전류의 이동이 용이했음을 알 수 있다.