• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.7
• /
• pp.489-498
• /
• 2019

The airloads and structural loads of Light Civil Helicopter (LCH) rotor are investigated using a loose CFD/CSD coupling. The structural dynamics model for LCH 5-bladed rotor cwith elastomeric bearing and inter-bladed damper is constructed using CAMRAD-II. Either isolated rotor or rotor-fuselage model is used to identify the effect of the fuselage on the aeromechanics behavior at a cruise speed of 0.28. The fuselage effect is shown to be marginal on the aeromechanics predictions of LCH rotor, though the effect can be non-negligible for the tail structure due to the prevailing root vortices strengthened by the fuselage upwash. A lifting-line based comprehensive analysis is also conducted to verify the CFD/CSD coupled analysis. The comparison study shows that the comprehensive analysis predictions are generally in good agreements with CFD/CSD coupled results. However, the predicted comprehensive analysis results underestimate peak-to-peak values of blade section airloads and elastic motions due to the limitation of unsteady aerodynamic predictions. Particularly, significant discrepancies appear in the structural loads with apparent phase differences.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.2
• /
• pp.29-37
• /
• 2021

The effect of Ar/N₂ two-step plasma treatment on the quantitative interfacial adhesion energy of low temperature Cu-Cu bonding interface were systematically investigated. X-ray photoelectron spectroscopy analysis showed that Ar/N₂ 2-step plasma treatment has less copper oxide due to the formation of an effective Cu4N passivation layer. Quantitative measurements of interfacial adhesion energy of Cu-Cu bonding interface with Ar/N₂ 2-step plasma treatment were performed using a double cantilever beam (DCB) and 4-point bending (4-PB) test, where the measured values were 1.63±0.24 J/m² and 2.33±0.67 J/m², respectively. This can be explained by the increased interfacial adhesion energy according phase angle due to the effect of the higher interface roughness of 4-PB test than that of DCB test.

• Conservation Science in Museum
• /
• v.26
• /
• pp.143-160
• /
• 2021

The Seoul Baekje Museum has been conducting excavations at the Ancient Tomb Complex in Seokchon-dong, Seoul (Historic Site No. 243), known to be tombs of the royal family and the ruling class during the Hanseong period of the Baekje Kingdom. In this study, gold earrings that were revealed during the excavation underwent scientific analysis and conservation treatment. Stereo microscopy, SEM, X-ray imaging, CT, and XRF were applied in the analysis, and the characteristics, internal structure, and composition of the earrings as well as their production method were investigated. The results confirmed that the main hoops of the gilt-bronze earrings were made of copper cores gilt using mercury amalgamation. The findings also revealed that the hexahedron in the middle pendant was made by connecting small rings using molten gold powder, and the pendant sphere at the end was formed by soldering two hemispheres. As for the two thin-hoop earrings, they showed similar surface compositions but were made using different methods, with one made from a copper core wrapped with a gold plate and the other made by bending a gold rod. The gold content varied depending on the item and the place of measurement, but overall the earrings showed a relatively high gold content of approximately 19 to 21K. The purity of the golden earrings and the sophisticated manufacturing techniques applied indicate the high status of the buried person and of the tomb complex in Seokchong-dong.

• Journal of Korea Entertainment Industry Association
• /
• v.15 no.4
• /
• pp.45-54
• /
• 2021

Jeong Sun-Ah built up her performance career for twenty years with bold and energetic acting and solidified her status as a leading actress of Korean musical since her debut. To benefit from the value of her experience this study performed an in-depth interview with her, applying the Theory of "Projection" and "Back-projection", which are the psychological principles of acting, and derived "acting(entering the roles)" and "de-acting(leaving the roles)" techniques. As result, Her acting mechanism involved emptying her ego, embodying a persona by projecting the role created by intensive exploration of materials like previous performance, film of the same title, original novel, and script, and then getting the ego back by back-projecting through dynamic activities such as overseas travel and dance. She pre-studied the roles by physically visiting sites that are important to the characters. She was unique in that she pursued a difference by changing vocal trainers for each musical production and undertook more intense physical training than vocal practice to achieve powerful singing performance. In most of her works (75%), she suffered from aftereffects such as depression, narcissism, hysteria, and insomnia due to disorder caused by breaking away from the roles. However, she relied on self-help and alternatives are needed in the future such as reinforcement of expert counselling. Jeong Sun-Ah appeared on an average of 1.6 productions per year, practiced for an average of 1.7 months, and performed for an average of 3.9 months with an average of 100 days of break between productions. Her performance record from this research demonstrates her constant preparation and passion, as well as the know-how of reserving and distributing energy. So, it has a valuable implications for acting education and self-management of actors and actress.

• Journal of the Daesoon Academy of Sciences
• /
• v.31
• /
• pp.49-92
• /
• 2018

I have examined some beliefs in the Thunder God and their magico-ritual techniques in Korea from the perspective of Korean national religious history and have classified these types of beliefs. In several myths from ancient nations in Korea, the Thunder God was the Supreme being governing the Universe including the sky, earth, and water, and he justified political power transcendently. In the medieval period, the Thunder God who was called 'the Supreme God and Celestial Worthy of the Ninth Heaven Who Spreads the Sound of the Thunder Corresponding to Primordial Origin' was the object of Daoist ritual for rain. In the early Joseon period, people believed that the prehistoric stone tools known as thunder axes were the tools of the Thunder God, and thereby were imbued with medicinal power. In the late Joseon period, beliefs in the Thunder God developed in various ways such as the overcoming of wars and healing of diseases. Modern Korean national religions including Daesoon Jinrihoe reappropriated the Thunder God called 'the Supreme God and Celestial Worthy of the Ninth Heaven Who Spreads the Sound of the Thunder Corresponding to Primordial Origin' from the perspective of the Great Opening (Kaebyŏk) and the resolution of grievances (Haewon).

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5B
• /
• pp.559-573
• /
• 2008

In this study, we newly proposed 3-D nonlinear wave driver utilizing the Navier-Stokes Eq. the numerical integration of which is carried out using SPH (Smoothed Particle Hydrodynamics), an internal wave generation with the source function of Gaussian distribution and an energy absorbing layer. For the verification of new 3-D nonlinear wave driver, we numerically simulate the sloshing problem within a parabolic water basin triggered by a Gaussian hump and uniformly inclined water surface by Thacker (1981). It turns out that the qualitative behavior of sloshing caused by relaxing the external force which makes a free surface convex or uniformly inclined is successfully simulated even though phase error is visible and an inundation height shrinks as numerical simulation more proceeds. For the more severe test, we also simulate the nonlinear shoaling and refraction over uniform beach of wedge shape. It is shown that numerically simulated waves are less refracted than the linear counterpart by Hamiltonian ray theory due to nonlinearity, energy dissipation at the bottom and side walls, energy loss induced by breaking, and the hydraulic jump occurring when breaking waves encounter a down-rush by the preceding wave.

• The Journal of Korean Philosophical History
• /
• no.43
• /
• pp.107-139
• /
• 2014

Tasan Chong Yak-yong has criticized Zhu Xi's metaphysical viewpoints of human being. Therefore he revealed his viewpoint of human being and the theory of moral practice through his thoughts about the Lord of Heaven and human nature with spiritual inclination toward goodness. He has drawn the Lord of Heaven into Confucianism again. Heaven as the Lord endows human being with a nature that enjoys virtues and detests vices. It watches human being's good and evil. Here we can say Heaven is a outer efficient cause of moral behavior. According to Tasan, human being has its own 'self directed weight'自主之權 so that he can make a judgment and decision about what to do. Therefore we have to do manifest this moral inclination which is a inner efficient cause of moral behavior. That is to say, we must follow the order of daoxin道心 inside our mind. If we did go against it, our mind would be uncomfortable. Now through the method of so-called shu恕 we need to put filial piety孝 fraternal respect弟 compassion慈 into practice. These three moral practices represent the spirit of reciprocity in Confucianism. These lead us to make an achievement of ren仁, representative virtue in the theory of moral practice. Our moral practice means the fulfillment of humanity. This is the way to serve Heaven. Tasan insists that theses are the core thoughts of Confucius and Mencius.

• Archives of design research
• /
• v.18 no.4 s.62
• /
• pp.277-286
• /
• 2005

The purpose of this study is to ascertain the design element in traditional palaces of Korea, China and Japan. It takes threesteps to proceed this study. Firstly, it needs to be established the analysis framework from the documents. In second step, the design elements - the form, the material, the pattern and the color - should be collected and investigated through the observation of the actual traditional palaces the Changduckung, the Forbidden City, the Nijo castle. The third step is the analysis of the results of the investigation of the design elements from step two. To sum up similarities and dissimilarities among the design element in traditional palaces of Korea, China and Japan is as the following It is to be noticed that the mainly common characteristics of the artistic design are 'naturalism', 'harmonious ideas' and 'confucianism'. But the representation style of the design element is differed from the country. : The typical features of China are symmetry, glassy surface by artificial process, the meandered curve, the magnificent pattern and the constrable color. In Japan, the mathematical asymmetry, made-up rough surface by artificial skill, decorativepattern with abbreviation and achromatic color are important feature of the design element. While the major features of Korean design element are asymmetrical balance with nature, rough surface by natural process, moderate pattern and harmonious color.

• Journal of the Korean earth science society
• /
• v.35 no.7
• /
• pp.562-571
• /
• 2014

In the celebration of the $50^{th}$ anniversary of the Korean Earth Science Society, the whole articles published in Journal of the Korean Earth Science Society (JKESS) were quantitatively analyzed. JKESS has played a major role in exchanging academically among earth science education specialists and in educating next generation for the last 36 years since it was founded in 1979. The total number of 1544 articles in thirty five volumes about the earth sciences and the earth science pedagogy has been published by August, 2014, and the number of the yearly published articles has been increasing. Regarding the research area, 69.3% was published in earth sciences and the other 30.7% was in earth science education; the percentage of research articles in geology, atmospheric science, environmental science, oceanography, and astronomy was 55.2, 17.6, 16.0, 6.0, and 5.2%, respectively. The number of research articles on atmospheric science and environmental science has recently been increasing, whereas, earth science education research articles have been" decreasing, which was similar to the pattern seen fifteen years ago. We thought that one of the reasons was related to a new journal named, "Journal of the Korean Society of Earth Science Education" started to publish in December, 2008. The number of articles authored or co-authored with foreigner scholars was totaled 53, which is only 3.4% of the entire number of published articles. It suggests that international advertisement via public relations as well as the development of English homepage be necessary. In order to become an excellent registered academic journal, it is the time to comprehensively discuss how to improve both the quality growth and the quantity of JKESS. According to the Ministry of Education, it is now in its planning stage to convert the current registration system of the academic journals to the autonomous evaluation system in academia. Therefore, we recommend that Journal of the Korean Earth Science Society be prepared for the upcoming future change.

• Journal of Biomedical Engineering Research
• /
• v.25 no.5
• /
• pp.391-401
• /
• 2004

3D imaging systems using 2D phased arrays have a large number of active channels, compelling to use a very expensive and bulky beamforming hardware, and suffer from low volume rate because, in principle, at least one ultrasound transmit-receive event is necessary to construct each scanline. A high speed 3D imaging method using a cross array proposed previously to solve the above limitations can implement fast scanning and dynamic focusing in the lateral direction but suffer from low resolution except at the fixed transmit focusing along the elevational direction. To overcome these limitations, we propose a new real-time volumetric imaging method using a cross array based on the synthetic aperture technique. In the proposed method, ultrasound wave is transmitted successively using each elements of an 1D transmit array transducer, one at a time, which is placed along the elevational direction and for each firing, the returning pulse echoes are received using all elements of an 1D receive array transducer placed along the lateral direction. On receive, by employing the conventional dynamic focusing and synthetic aperture method along lateral and elevational directions, respectively, ultrasound waves can be focused effectively at all imaging points. In addition, in the proposed method, a volume of interest consisting of any required number of slice images, can be constructed with the same number of transmit-receive steps as the total number of transmit array elements. Computer simulation results show that the proposed method can provide the same and greatly improved resolutions in the lateral and elevational directions, respectively, compared with the 3D imaging method using a cross array based on the conventional fixed focusing. In the accompanying paper, we will also propose a new real-time 3D imaging method using a cross array for improving transmit power and elevational spatial resolution, which uses linear wave fronts on transmit.