• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.7
• /
• pp.3482-3486
• /
• 2013

In the case of the Pilot Symbol Assisted Modulation (PSAM) method predicting and compensating amplitude and phases caused on fading channels, there can be severe performance deterioration by Doppler spread on fast fading channels. In this paper, the fading compensation method suggested so as to improve occurring problems as well as analyze them. Doppler spread is the major cause of the bit error rate(BER) performance deterioration. Compared to the existing PSAM method, the more performance deterioration occurs, the larger Doppler spread appears but performance shows well its less $10^{-2}BER$ performance than the existing PSAM method in the suggested method whereas the existing PSAM method has about $10^{-1}BER$ its considerable performance deterioration that caused by Doppler spread within a symbol cycle with the level of delay wave interference.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.10 s.101
• /
• pp.1020-1027
• /
• 2005

In this paper, economic miniature RF transmitter module for intelligent transportation system(ITS) is described. This module which consists of ASK modulator, frequency synthesizer, power amplifier is operating at 5.8 GHz frequency band and implemented by using LTCC process technique. Thus, ultra small size of 0.8 CC and improved electrical performances has been obtained. From the test results, transmitting characteristics of 10 dBm ouput power and -46 dBc interchannel interference with 1.024 Mbps ASK modulated have been shown. Frequency synthesizer as a transmitting signal source reveals very short locking time of 26 usec and outstanding phase noise of -115 dBc/Hz at 1 MHz offset from 5.8 GHz center frequency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.14 no.4
• /
• pp.423-434
• /
• 1989

In this paper, a PRS transmission system using TMRCP as the unit pulse is proposed, which solves the problems occur when the PRS method will be applied to the digital transmultiplexer for each channel. And a design technique which uses this PRS method for the FFT polyphase filter transmultiplexer concept is given. TMRCP-PRS signal require a bandwidth about 2.5KHz(including some guard-band) for a 4-KHz bandlimited voice channel. Therefore, in he 24 channel transmission line, it gives the same advantages as he ordinary PRS system and sloves the inter-channel interference problems. And its good speed-tolerance reduces the time-errors by the environments and the power loss, so it makes the system to be stable. The total system, however, attaces the filters for PCM-PRS, PRS-PCM conversion before and after the transmultiplexer respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.8B
• /
• pp.1453-1459
• /
• 2000

In this paper, the method which compensates the problem occurred in case M-ary QAM is applied to system is proposed. The conventional CMA has two problems, First, when M is larger than 4, it has a poor performance of equalizer due to a degradation of convergence property. Second, the phase of conventional CMA is distorted after convergence. To compensate these problems, we set the proper interval according to modulated signal when the signal using 16-QAM modulation method is equalized and use a different equalizing method for each interval. Using this method, the ISI is reduced and the performance of equalizing is improved. Also, the computer simulation using residual ISI shows an improved performance.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.24 no.3
• /
• pp.31-40
• /
• 2020

The structure and dynamics of multiple shock waves are studied numerically using a finite volume solver for a model with nozzle exit Mach number of 1.75. At first, the shock variation based on images were analyzed using a Matlab program then later to the wall static pressure variation. The amplitude and frequency variation for multiple shock waves are analyzed. The cross-correlation between the shock location suggests that the first and the second shocks are well correlated while the other shocks show a phase lag in the oscillation characteristics. The rms values of pressure fluctuations are maximum at the shock locations while the other parts in the flow exhibit a lower value os standard deviation.

• Korean Journal of Remote Sensing
• /
• v.27 no.5
• /
• pp.555-563
• /
• 2011

Nowadays, demands with respect to applications based on geo-based information on mobile device such as smartphone and those based on open platform or open source have been increasing. This trend can be regarded as significant opportunities to widen application fields and to expand industry business cases using satellite imagery. However, it needs a different approach from conventional remote sensing researches. This work focuses on SAR among many kinds of geo-based data resources. First, an application for Interferometric SAR processing based on open source was implemented. And using this, InSAR data was processed and stored into database. When smartphone users at any places request InSAR results, they can receive InSAR information and concerned metadata on their device. An smartphone application for this task was designed and implemented in this study. This provides a practical way for SAR service for smartphone, and can apply to build mobile service system of complex and compound types of remote sensing resources and their derived contents.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.4A
• /
• pp.360-370
• /
• 2010

In this paper, a distributed beamforming problem is considered in an amplify-and-forward (AF) wireless relay network consist of multiple source-destination pairs and relaying nodes. To exploit degree of freedom of the number of beamformers, in the first step, we proposed that the sources transmit their signals through orthogonal channels. During the second step, the relays transmit their received signals multiplied by complex weights to amplify and compensate for phase changes introduced by the backward channels through one common channel. The optimal beamforming vectors are obtained through minimization of the total relay transmit power while the signal-to-interference-plus-noise ratios (SINRs) at the destinations are above certain thresholds to meet a quality of services (QoSs) level. In the numerical example, it is shown that the proposed scheme needs less transmit power for moderate network data rates than other schemes, such as space division multiplexing or time-division multiplexing scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.2
• /
• pp.209-216
• /
• 2013

In this paper, we design and analyze digital retrodirective array antenna (RDA) system in 60GHz wireless communication for low power consumption and high quality. Digital RDA can automatically make beam toward source without information about the direction of incoming signal, this system is able to do low power communication thanks to increased signal to interference noise ratio (SINR) because making the beam toward source can reduce interference signals. The frequency offset seriously arises when millimetric wave band like 60GHz is used to communicate for high-speed transmission. The proposed system is robustly designed to frequency offset through designing digital phase lock loop in order to solve the problem of frequency offset. In this paper, we analyze the performance of the proposed system according to the number of array antenna and frequency offset. striking space.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.8 no.1
• /
• pp.37-43
• /
• 1996

Breaking waves were generated in a 2-D flume. A piston-type wavemaker was operated in accordance with signals which consist of elementary harmonics with appropriate phase differences. These phase differences were estimated by using a linear wave theory so that wave crests were to be concentrated at the same position. The stroke of wavemaker was controlled to create plunging-type breaking waves. The signal with small amplitude could not generate breaking waves. In the case of moderate amplitudes, various breaking waves could be obtained. Most of breaking waves were spilling type. Only when the wavemaker was operated with appropriate amplitude, plunging-type breaking waves were generated. The parameters of breaking waves are the wave steepness and the frequency bandwidth. If the central frequency was low, breaking waves were not generated. Based on experimental data, we found that the wave height of breaking inception was H = 0.0113 gT$^2$. We also made computations by using a mixed Euler-Lagrangian scheme under the assumption of potential flow. The numerical results show good agreements with tank measurements.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.3
• /
• pp.291-298
• /
• 2019

In this paper, we propose a Fresnel transform method using various wavelet functions to efficiently decompose digital holograms. After implementing the proposed wavelet function-based Fresnelet transforms, we apply it to the digital hologram and analyze the energy characteristics of the coefficients. The implemented wavelet transform-based Fresnelet transform is well suited for reconstructing and processing holograms which are optically obtained or generated by computer-generated hologram technique. After analyzing the characteristics of the spline function, we discuss wavelet multiresolution analysis method based on it. Through this process, we proposed a transform tool that can effectively decompose fringe patterns generated by optical interference phenomena. We implement Fresnelet transform based on wavelet function with various decomposition properties and show the results of decomposing fringe pattern using it. The results show that the energy distribution of the coefficients is significantly different depending on whether the random phase is included or not.