• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.1
• /
• pp.84-89
• /
• 2001

This paper deals with multiresolution analysis of wavelet transform for partial discharge(PD), composite discharge(corona + surlace discharge). Multiresolution analysis was used for performing discrete wavelet transform PD signals was decomposed into "approximation" and "detail" cOmpJnents until 4 levels by using discrete wavelet analysis. In this paper, daubechies family is adopted for the research of the characteristics of PD signals. 1be results show that in corona discharge the segment 7, 8, 9, 10, 1] values of defined variable is increased with discharge process, so phase distribution is characterized by 210~330 ranges. In case surface discharge in expoxy insulator inserted, defined variable values is fairly symmetric chscharge pattern because coupled both corona and dielectric oounded discharges. We can confimJly discriminate the type of PD source.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.10a
• /
• pp.76-78
• /
• 1993

간접적인 방법으로 가공중(In process)공구상태를 감시하기 위해, 센서신호를 분석하는 방법으로 시간영역 (Time Domain) 해석과 주파수 영역(Frequency Domain)해석이 주로 이용되어 왔다. 시간영역해석의 경우 RMS,PEak Value, 평균/분산을 이용한 정적분석과 AR 모델, ARMA 모델, Kalman Filter등 동적 시계열 모델이 연구되어 왔다. 주파수영역해석의 경우 푸리에 변환 (Fourier Transform)에 의한 신호해석 기술이 주로 이용되고 있다. 그러나 푸리에 변환된 결과에는 시간정보가 포함되어 있지 않고, 국부적인 변환결과가 전체를 대표하는 성질을 가지고 있다. 이에 비해 웨이브렛(Wavelet) 변환은 고주파성분에 대해서는 시간분해능이 높고, 저주파 성분에 대해서는 주파수분해능이 높은 다중해상도 해석기술로서 국소적인 변동점을 민검하게 검지하는 것이 가능하다. 본연구에서는 엔드밀 가공중 발생하는 공구의 파손을 검출하기 위해, 전류센서로 부터 얻은 이송축 부하 전류의 변화에 웨이브렛 변환을 통해 공구의 파손을 검출하는 방법에 대한 연구결과를 소개한다.

• Journal of Broadcast Engineering
• /
• v.4 no.2
• /
• pp.127-133
• /
• 1999

The conventional fractal image compression based on discrete wavelet transform uses the fixed block size in fractal coding and reduces PSNR at low bit rate. This paper proposes a fractal image coding based on discrete wavelet transform which improves PSNR by using variable block size in fractal coding. In the proposed method. the absolute values of discrete wavelet transform coefficients are computed. and the discrete wavelet transform coefficients of different highpass subbands corresponding to the same spatial block are assembled. and the fractal code for the range block of each range block level is assigned. and then a decision tree C. the set of choices among fractal coding. "0" encoding. and scalar quantization is generated and a set of scalar quantizers q is chosen. And then the wavelet coefficients. fractal codes. and the choice items in the decision tree are entropy coded by using an adaptive arithmetic coder. This proposed method improved PSNR at low bit rate and could achieve a blockless reconstructed image. As the results of experiment. the proposed method obtained better PSNR and higher compression ratio than the conventional fractal coding method and wavelet transform coding.rm coding.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.3 no.2
• /
• pp.32-38
• /
• 2004

The chatter behaviour in endmilling is a complex and nonlinear phenomenon, so it is very difficult to detect and diagnose this chatter phenomenon, This paper presents new method for the detection of chatter in endmilling operation based on the wavelet transform. In this paper, the fundamental property of the wavelet transform is reviewed by comparing the spectrum of other algorithm such as FFT. This result using wavelet transform shows the possibiling of the chatter detection in endmilling operation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1998.11a
• /
• pp.553-561
• /
• 1998

본 논문에서는 심전도를 분석함에 있어 임계값과 변화량 및 웨이브렛 변환을 이용하여 R파 검출 알고리즘을 설계하였다. 웨이브렛 함수를 이용하여 입력되는 심전도 데이터를 저주파 대역과 고주파 대역으로 각각 j=-9 레벨까지 분할하고, 분할의 j=-9 레벨에서의 저주파 신호인 A9를 제거함으로써 기저선 변동을 제거하였다. 기저선 변동이 제거된 신호에서 심전도 신호의 임계값에 의한 방법과 변화량의 임계값에 의한 방법 그리고 웨이브렛 변환 중 j=-1 레벨에서의 고주파 신호인 Dl의 임계값에 의한 방법을 사용하여 R파를 검출하였다. 알고리즘 검증을 위하여 CSE 데이터베이스와 MIT/BIH 데이터베이스의 일부를 사용하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.113-117
• /
• 2003

In this paper, have necessity of PACS (Picture Archiving and Communication System) at hospital but hereafter by economical problem PACS apply this to medical treatment image enhancing image quality applying histogram equalization for improvement of light and darkness after reconstruct because make image that pretreatment filtering has wild picture and is processed in wave lets dissolution and wave lets area using weight median filter because could not buy expensive equipment at hospital which introduction is difficulty do inversion and extracted characteristic.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1998.03a
• /
• pp.149-152
• /
• 1998

정보통신 기술이 급격히 발달함에 따라 영상처리 및 압축 기술에 대한 중요성이 대두되고 있다. 현재 정지 압축 영상 표준인 JPEG과 동영상 압축 표준인 MPEG에서는 통계적 특성에 기반한 DCT 방법을 이용하여 압축을 수행하고 있다. 최근에는 웨이브렛 변환을 이용한 영상신호 처리 및 압축에 관한 연구가 활발히 이루어지고 있는데, 이는 기존의 DCT 방법과는 달리 속도와 압축률이 뛰어나며 블록화 현상(Blocking Effect)이 발생하지 않기 때문이다. 또한 웨이브렛 자체가 함수이고 이러한 함수에 다른 스케일과 해상도를 적용하는것이므로, 영상을 확대하거나 축소하더라도 이미지에 손상을 주지 않고 복원할 수 있다. 스테레오 이미지는 사람의 시각에서 물체를 보는 것처럼, 카메라에서 같은 장면을 약간의 차이를 두어 찍은 것이다. 따라서 오른쪽과 왼쪽의 두 이미지로 나누어지게 되는데, 이 두 이미지 사이에서 공통 부분이 많다는 특징을 가지게 된다. 따라서 두 이미지의 공통 부분을 찾아 내고, 이를 이용하여 압축을 할 수 있다면 압축률을 높일 수 있다. 본 연구에서는 웨이브렛 변환을 이용하여 스테레오 이미지에서의 공통 부분을 찾고 영상을 효율 岵막\ulcorner 압축하는 방법에 대하여 연구한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.12
• /
• pp.2772-2782
• /
• 1997

In this paepr, a Wiener filtering method in wavelet domain is proposed for restoring an image corrupted by additive white noise. The proposed method utilizes the characteristics of wavelet transform signals and the local statistics of each subband. When estimating the local statistics in each subband, the size of filter window is varied according to each scale. At this point, the local statistics in each wavelet subband is estimated only by using pixedls which have similar statistical property. Experimental results show that the proposed method has better performance over the conventional Lee filter with a window of fixed size.

• Journal of the Korean Geophysical Society
• /
• v.2 no.2
• /
• pp.143-152
• /
• 1999

We have studied a denoising technique involving wavelet transform for improving the quality of geophysical data during the preprocessing stage. To assess the effectiveness of this technique, we have made synthetic data contaminated by random noises and compared the results of denoising with those obtained by conventional low-pass filtering. The low-pass filtering of the sinusoidal signal having a sharp discontinuity between the first and last sample values shows apparent errors related to Gibbs' phenomena. For the case of bump signal, the low-pass filtering induces maximum errors on peak values by removing some high-frequency components of signal itself. The wavelet transform technique, however, denoises these signals with much less adverse effects owing to its pertinent properties on locality of wavelet and easy discrimination of noise and signal in the wavelet domain. The field data of gravity tide are denoised by using soft threshold, which shrinked all the wavelet coefficients toward the origin, and the G-factor is determined by comparing the denoised data and theoretical data.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.6
• /
• pp.501-510
• /
• 2000

Recently, advanced signal analysis which is called "time-frequency analysis" has been used widely in nondestructive evaluation applications. Wavelet transform(WT) and Wigner Distribution are the most advanced techniques for processing signals with time-varying spectra. Wavelet analysis method is an attractive technique for evaluation of material characterization nondestructively. Wavelet transform is applied to the time-frequency analysis of ultrasonic echo waveform obtained by an ultrasonic pulse-echo technique. In this study, the feasibility of noise suppression of ultrasonic flaw signal and frequency-dependent ultrasonic group velocity and attenuation coefficient using wavelet analysis of ultrasonic echo waveform have been verified experimentally. The Gabor function is adopted the analyzing wavelet. The wavelet analysis shows that the variations of ultrasonic group velocity and attenuation coefficient due to the change of material characterization can be evaluated at each frequency. Furthermore, to assure the enhancement of detectability and naw sizing performance, both computer simulated results and experimental measurements using wavelet signal processing are used to demonstrate the effectiveness of the noise suppression of ultrasonic flaw signal obtained from austenitic stainless steel weld including EDM notch.