• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.731-734
• /
• 1997

In this study, a shape optimization is performed for circular and elliptical holes to reduce weight of a plate. It is accomplished in reference to the results of topology optimization of the square plate with circular hole. From the results. it is concluded that the stress values of shape optimization of them are satisfied with 100MPa of constraint condition.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.262-263
• /
• 2000

이온교환방법은 착색된 유리를 생산하기 위하여 수세기 전부터 연구되어 왔다. 1972년 Izawa와 Nagome가 silicate 유리에 Tl$^{+}$이온을 치환하여 평판 도파로를 만든 후, 이온교환은 도파로나 마이크로 렌즈제작 등에 활발하게 연구되어 왔다. 유리 도파로는 광의 진행손실이 적으며, 광섬유와의 우수한 호환성, 그리고, 제작이 용이하고 가격이 싼 장점 등으로 인하여 많은 연구가 진행되고 있는 재료이다. 그러나, 유리에 이온교환으로 광소자를 만들기 위해서는 굴절률변화를 정확하게 예측해야한다. 따라서, 유리에서 이온들의 확산특성을 정확하게 분석하고 실험적으로 확립하는 연구는 매우 중요하다고 하겠다. (중략)

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1083-1087
• /
• 2009

We present an 1-dimensional annular disk element with which natural vibration of a circular plate can be analyzed accurately and facilely. The natural vibration characteristics of a circular plate with free outer boundary are analyzed by using the presented I-dimensional element. Its results are compared with the results obtained by utilizing 2-dimensional 8-node quadrilateral plane element and cyclic symmetry of the circular plate. And also, by comparing with the theoretical results of previous researchers, the accuracy and facility of the presented I-dimensional element are verified.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1999.05a
• /
• pp.75-79
• /
• 1999

순환유동층은 주탑에서 비말 동반된 입자를 cyclone과 같은 입자 포집장치에서 회수하여 다시 주탑으로 재 주입함으로써 입자의 순환이 일어나는 외부 순환계와 종래의 유동층내에 원형관(Draft tube)이나 평판을 설치하여 두개의 층으로 분리한 후 가스 분산판 위의 간격을 통해 입자들을 두 구역 사이로 강제 순환시키는 내부순환계로 분류할 수 있다. 드래프트 관을 갖는 내부순환유동층 반응기는 기체와 고체의 적절한 접촉을 통해 반응이 이루어지는 반응기 형태이다.(중략)

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.7 no.4
• /
• pp.91-102
• /
• 1987

In this study, the finite element method using 8-node isoparametric element is developed theoretically and simulated to see the deformation of soil and plate, when the circular plate resting on Boussinesq's soil type is loaded axisymmetrically. The results of numerical analysis using the Mohr-Coulomb yield criterion, and experimental analysis are approximative, assuming that soil is elasto-plastic medium. The paper shows that the plastic zone of soil medium is displayed at the near the edge of plate at the first place; when the plastic zone of soil medium is linked around central axis, the external load is termed by critical load, and then the contact pressure changes abruptly, in this case it is approved to be the risk of shear failure.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.28 no.11
• /
• pp.450-457
• /
• 2016

While many studies on the heat transfer effect of an impinging jet have been published, most studies focus on the downward impinging jet. This study investigates the impinging jet heat transfer phenomenon when water at a temperature of $24^{\circ}C$ impinges on the downward isothermal circular plate at 60, 70, and $80^{\circ}C$ and when the upward round jet nozzle is 4, 6, and 8 mm diameter with a flow rate 3.6, 4.6, and 5.6 L/min, respectively, and when the ratio of the nozzle clearance/nozzle diameter (H/D) is 1. The results showed that, as the nozzle diameter decreases, the heat transfer coefficient increases at a constant flow rate. The correlation equation of $Nu_r$, $Pr_r$, and $Re_{jg}$ is obtained in the impinging and constant velocity flow region $(Nu_r/Pr^{0.4}_r)Dr=4.6[Re_{jg}(r/R_c)Dr]^{0.8}$ at all flow rates, in the deceleration and falling flow regions $(Nu_r/Pr^{0.4}_r)Dr=42.7{\mid}Re_{jg}(r/R_c)Dr-345.7{\mid}^{0.3}$ at 3.6 L/min, $(Nu_r/Pr^{0.4}_r)Dr=92.4{\mid}Re_{jg}(r/R_c)Dr-16.8{\mid}^{0.2}$ at 4.6 L/min, and $(Nu_r/Pr^{0.4}_r)Dr=322.4{\mid}Re_{jg}(r/R_c)Dr-536.2{\mid}^{0.01}$ at 5.6 L/min.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.371-372
• /
• 2008

본 논문은 새롭게 초음파 분산기법을 이용하여 제조된 나노콤포지트 와 원형에폭시 수지에 대한 전기적 특성인 트리현상의 여러특성을 연구하였다. 나노필러인 Layered Silicate Particles가 에폭시수지 중에 Power Ultrasonic으로 분산된 나노콤포지트를 제조하였다. 충진된 혼합물에서 나노입자의 영향을 조사하기위해 열적, 구조적 특성을 연구하였고, 장시간 절연파괴 특성을 조사하기위해 침대평판 전극으로 원형에폭시수지와 나노콤포지트와 비교 측정하였다. 연구는 에폭시원형수지에 대한 인가전압레벌(교류 10, 15, 20kV)의 변화와 온도변화에 대한 (30,90,$130^{\circ}C$)의 트리특성을 연구하였다. 모든 전압레벨에서는 일정전압까지 1kV/s 로 승압 후 일정하게 인가되었고, 파괴에 이를 때까지 측정한 결과 10kV, 15Kv, 20KV의 경우 1042,75,488분후에 파괴에 이르렀다. 그러나 트리진행속도는 인가전압이 높을수록 빠르게 진행하였다. 온도 변화에 대한 트리특성으로서 15kV인가 후 파괴에 이르는 시간은 30,90,$130^{\circ}C$의 경우 75.3, 970, 226분으로 $90^{\circ}C$의 경우 절연성능이 가장 우수하였고, 트리진전속도는 $30^{\circ}C,130^{\circ}C,90^{\circ}C$ 순으로 나타났다. 이는 트리진전으로 파괴에 이르는 시간과 속도는 트리형태에 지배적으로 영향을 맡고 있음을 알 수 있었다. 또한 나노콤포지트 트리의 경우 15kV인가시 10902에 파괴에 이르렀고, 트리진전속도는 0.000729mm/min으로 원형에 비하여 53.36배의 트리진전시간이 느리고, 파괴시간은 145배 오래 견디는 절연내력을 측정할 수 있었다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.12
• /
• pp.999-1008
• /
• 2014

In this study, we consider the heat transfer characteristics of channel flow in the presence of an infinite streamwise array of equispaced identical rotating circular cylinders. This flow configuration can be regarded as a model representing a micro channel or an internal heat exchanger with cylindrical vortex generators. A numerical parametric study has been carried out by varying Reynolds number based on the bulk mean velocity and the cylinder diameter, and the gap between the cylinders and the channel wall for some selected angular speeds. The presence of the rotating circular cylinders arranged periodically in the streamwise direction causes a significant topological change of the flow, leading to heat transfer enhancement on the channel walls. More quantitative results as well as qualitative physical explanations are presented to justify the effectiveness of varying the gap to enhance heat transfer from the channel walls.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.1
• /
• pp.181-188
• /
• 2004

Structural analysis for materials containing regularly spaced in-homogeneities is usually executed by using averaged material properties. For the homogenization process, a unit cell is defined and loaded somehow, and its response is investigated to evaluate the properties. The imposed loading conditions should accord to the behavior of unit cell immersed in the macroscopic structure in order to guarantee the accuracy of the effective properties. Each unit cell shows periodic variation of strain if the material is loaded uniformly, and in this study, direct implementation of this characteristic behavior is attempted on FE models of unit cell. Conventional finite element analysis tool can be used without any modification, and the boundary of unit cell is constrained in a way that the periodicity is satisfied. The proposed method is applicable to skew arrayed in-homogeneity problems. The flexibility matrix relating tonsorial stress and strain components in skewed rectilinear coordinate system is transformed so that the required engineering constants can be evaluated. Effective properties are computed for the materials with square and skew arrayed circular holes, and its accuracy is examined.

• Proceedings of the KSME Conference
• /
• 2000.11b
• /
• pp.87-92
• /
• 2000

This study is to investigate the heat transfer characteristics the for a round turbulent jet impinging on the flat plate with and without rib. Liquid crystal/transient method was used to determine the Nusselt number distributions along the surface. The temperature on the surface was measured using liquid crystal and a digital color image processing system. The experiments were made fur the jet Reynolds number (Re) 23,000, the dimensionless nozzle-to-surface distance (L/d) from 2 to 10, and the rib type [height ($d_1$) 2mm, pitch (p) from 12 to 36mm]. It was found that for $L/d{\ge}6$ the average Nusselt numbers on the flat plate with rib type C ($p/d_1=16$) are higher than those without rib, mainly due to an increase in the turbulent intensity caused by flow separation, recirculation and reattachment on the wall surface.