• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.37 no.3
• /
• pp.196-213
• /
• 2001

A split beam ultrasonic transducer operating at a frequency of 70 kHz to use in the fish sizing echo sounder was developed and the acoustic radiation characteristics were experimentally analyzed. The amplitude shading method utilizing the properties of the Chebyshev polynomials was used to obtain side lobe levels below -20 dB and to optimize the relationship between main beam width and side lobe level of the transducer, and the amplitude shading coefficient to each of the elements was achieved by changing the amplitude contribution of elements with 4 weighting transformers embodied in the planar array transducer assembly. The planar array split beam transducer assembly was composed of 36 piezoelectric ceramics (NEPEC N-21, Tokin) of rod type of 10 mm in diameter and 18.7 mm in length of 70 kHz arranged in the rectangular configuration, and the 4 electrical inputs were supplied to the beamformer. A series of impedance measurements were conducted to check the uniformity of the individual quadrants, and also in the configurations of reception and transmission, resonant frequency, and the transmitting and receiving characteristics were measured in the water tank and analyzed, respectively. The results obtained are summarized as follows : 1. Average resonant and antiresonant frequencies of electrical impedance for four quadrants of the split beam transducer in water were 69.8 kHz and 83.0 kHz, respectively. Average electrical impedance for each individual transducer quadrant was 49.2$\Omega$ at resonant frequency and 704.7$\Omega$ at antiresonant frequency. 2. The resonance peak in the transmitting voltage response (TVR) for four quadrants of the split beam transducer was observed all at 70.0 kHz and the value of TVR was all about 165.5 dB re 1 $\mu$Pa/V at 1 m at 70.0 kHz with bandwidth of 10.0 kHz between -3 dB down points. The resonance peak in the receiving sensitivity (SRT) for four combined quadrants (quad LU+LL, quad RU+RL, quad LU+RU, quad LL+RL) of the split beam transducer was observed all at 75.0 kHz and the value of SRT was all about -177.7 dB re 1 V/$\mu$Pa at 75.0 kHz with bandwidth of 10.0 kHz between -3 dB down points. The sum beam transmitting voltage response and receiving senstivity was 175.0 dB re 1$\mu$Pa/V at 1 m at 75.0 kHz with bandwidth of 10.0 kHz, respectively. 3. The sum beam of split beam transducer was approximately circular with a half beam angle of $9.0^\circ$ at -3 dB points all in both axis of the horizontal plane and the vertical plane. The first measured side lobe levels for the sum beam of split beam transducer were -19.7 dB at $22^\circ$ and -19.4 dB at $-26^\circ$ in the horizontal plane, respectively and -20.1 dB at $22^\circ$ and -22.0 dB at $-26^\circ$ in the vertical plane, respectively. 4. The developed split beam transducer was tested to estimate the angular position of the target in the beam through split beam phase measurements, and the beam pattern loss for target strength corrections was measured and analyzed.

• Geophysics and Geophysical Exploration
• /
• v.8 no.4
• /
• pp.270-279
• /
• 2005

Under the research project supported by Japanese Ministry of Education, Culture, Sports, Science and Technology (MEXT), we have conducted the development of GPR systems for landmine detection. Until 2005, we have finished development of two prototype GPR systems, namely ALIS (Advanced Landmine Imaging System) and SAR-GPR (Synthetic Aperture Radar-Ground Penetrating Radar). ALIS is a novel landmine detection sensor system combined with a metal detector and GPR. This is a hand-held equipment, which has a sensor position tracking system, and can visualize the sensor output in real time. In order to achieve the sensor tracking system, ALIS needs only one CCD camera attached on the sensor handle. The CCD image is superimposed with the GPR and metal detector signal, and the detection and identification of buried targets is quite easy and reliable. Field evaluation test of ALIS was conducted in December 2004 in Afghanistan, and we demonstrated that it can detect buried antipersonnel landmines, and can also discriminate metal fragments from landmines. SAR-GPR (Synthetic Aperture Radar-Ground Penetrating Radar) is a machine mounted sensor system composed of B GPR and a metal detector. The GPR employs an array antenna for advanced signal processing for better subsurface imaging. SAR-GPR combined with synthetic aperture radar algorithm, can suppress clutter and can image buried objects in strongly inhomogeneous material. SAR-GPR is a stepped frequency radar system, whose RF component is a newly developed compact vector network analyzers. The size of the system is 30cm x 30cm x 30 cm, composed from six Vivaldi antennas and three vector network analyzers. The weight of the system is 17 kg, and it can be mounted on a robotic arm on a small unmanned vehicle. The field test of this system was carried out in March 2005 in Japan.

• Radiation Oncology Journal
• /
• v.9 no.1
• /
• pp.27-35
• /
• 1991

An interstitial radiofrequency needle electrode system was constructed for interstitial heating of brain tissue. Radiofrequency electrodes with Thermotron RF 8 were tested in an agar phantom and in a normal canine brain to determine how variations in physical factors affected temperature distributions. Temperature distributions were checked after heating with 1 mm diameter needle electrode implants on the corners of 1 and 2 cm squares in a phantom and plot isotherms for various electrodes arrangement. We observed that the 1 cm square array would heat a volume with a 1.25 cm radius circular field cross section to therapeutic temperatures ($90\%$ relative SAR using Tm) and the 2 cm square array with a 1.75 cm radius rectangular field with central inhomogeneity. With 2 cm long electrode implants, we observed that the 1 cm square array would heat a 3 cm long sagittal section to therapeutic temperature ($90\%$ relative SAR using Tm). We found that radiofrequency electrodes could be selected to match the length of the heating area without affecting its performance. The histopathological changes associated with RF heating of normal canine brains have been correlated with thermal distributions. RF needle electrode heating was applied for 50min to generate tissue temperatures of $43^{\circ}C$. We obtained a quarter of the heated tissue material immediately after heating and sacrificed at intervals from $7\sim30$days. The acute stage (immediately after heating) was demonstrated by liquefactive necrosis, pyknosis of neuronal element in the gray matter and by some polymer-phonuclear leukocytes infiltration. The appearance of lipid-laden macrophages surrounding the area of liquefaction necrosis was demonstrated in all three sacrificed dogs. Mild gliosis occurring around the necrosis was demonstrated in the last sacrificed (Days 30) canine brain.

• Archives of design research
• /
• v.19 no.5 s.67
• /
• pp.129-138
• /
• 2006

It is expected that the typical lifestyle of the future will be transformed into an opulent and comfortable existence as the quality of life improves due to the increase in household income and reduction in working hours. In the meantime, as the standard of living becomes increasingly more comfortable and plentiful, the toll on physical health becomes magnified as a result of obesity and insufficient exercise caused by super nutrition and change in labor conditions (from physical labor to mental labor). This has instigated a deep awareness in fitness on the part of many people, forcing them to recognize the significance of daily exercise and physical activity. The high annual growth rate in the fitness and athletic apparatus market, which is more than 20%, is attributed to this phenomenon. The Elliptical Cross Trainer(ECT), which has drawn wide attention recently, is a non-impact athletic apparatus that not only promotes exercise of the upper body parts in such sports as skiing but also the exercise of lower parts of the body on a treadmill. It is a type of cross training athletic gear that has been developed for aerobic exercise throughout the entire body. It has already formed a market as big as that of the treadmill in Europe, America, etc. Recently, its demand is growing sharply in the Korean markets as well as those in Northeast Asian countries, Despite such demand increase and expansion, since most of the expensive ECTs are exclusively supplied by suppliers in only a few advanced countries, localization of the ECT is urgently required in order to enhance competitiveness of Korean manufacturers and to expand the market. This paper introduces the process and results of a design-engineering cooperative study that was peformed for the development of the ECT.

• Archives of design research
• /
• v.19 no.5 s.67
• /
• pp.85-94
• /
• 2006

In the 2000s, character animation technique is used at domestic TV character animation ads of diverse items displaying new character patterns and expression techniques of a high level. This study intends to identify the characteristics of TV character animation ads based ell character aesthetic theory and advertising rhetoric theory, and based on these findings, analyze trend and stream of expression in TV character animation ads by examining and classifying advertisements released in the past four years by items, character patterns and expression techniques. The results showed that TV character animation ads have been concentrated on confectionery, beverages and foods in the past, but the items have been diversified through the years. With reference to character patterns, personal and animal characters had made the main pattern, but recently product, virtual and composite characters are on the increase. In expression techniques, cell animation technique was found to be the most frequently used technique, which was followed by full-3D, cell and live action, cell and 3D and the clay animation technique. A trend like this suggests that TV character animation advertising items will continue to increase in line with the participation level of targets. In the meantime, personal and animal characters will continue to make the leading character pattern, while virtual and composite character patterns emerge in new forms. In expression techniques, live action combined with 30 technique and techniques using new expression materials will appear with cell animation technique as a central figure. As a whole, Korean character animation advertisement is expected to keep on growing to a new dimension in the aspect of items, character patterns and expression technique.

• Archives of design research
• /
• v.19 no.5 s.67
• /
• pp.203-212
• /
• 2006

With interests and participation in the costumeplay that mimics characters appeared on carton or animation in recent days, the costumeplay becomes one of cultural phenomena. Using a qualitative research method, this study identified costumeplayers' costume consumption pattern and explored its meanings from the perspective of consumption culture. Indeed, this study intended to help for understanding costumeplayer group as a consumer, and to provide basic knowledge about new market analysis related to fashion design and marketing. The results from the analyzing participant observation and in-depth interviews data are as follows: first, costumeplayers usually begin costumeplay by friends' invitations or by themselves and then continue on participating. Through the costumeplay, participants have benefits such as fun, departure from the daily life, and social interaction. Second, participants acquire costumes through purchase, rent, producing or combination of daily wear, but both purchase and rent account high. Third, the meanings of consumption culture in costumeplay include consumption behavior repeating possession and disposal. Also, costumeplayers concerns efficiency when purchasing or renting the costumes, and internet is a place where information search, comparison, and actual purchasing are occurred. Based on the results, fashion design and marketing implication, limitation of this study and further research ideas were suggested.

• Journal of the Microelectronics and Packaging Society
• /
• v.11 no.2 s.31
• /
• pp.59-66
• /
• 2004

This paper presents a novel fabrication process for a tapered hollow metallic microneedle array using backside exposure of SU-8, and analytic solutions of critical buckling of a tapered hollow microneedle. An SU-8 meta was formed on a Pyrex glass substrate and another SU-8 layer, which was spun on top of the SU-8 mesa, was exposed through the backside of the glass substrate. An array of SU-8 tapered pillar structures. with angles in the range of $3.1^{\circ}{\sim}5^{\circ}$ was formed on top of the SU-8 mesa. Conformal electrodeposition of metal was carried out followed by a mechanical polishing using a pianarizing polymeric layer. All organic layers were then removed to create a metallic hollow microneedle array with a fluidic reservoir on the backside. Both $200{\mu}m\;and\;400{\mu}m$ tall, 10 by 10 arrays of metallic microneedles with inner diameters of the tip in the range of $33.6{\sim}101\;{\mu}m$ and wall thickness of $10{\mu}m\;-\;20{\mu}m$ were fabricated. Analytic solutions of the critical buckling of arbitrary-angled truncated cone-shaped columns are also presented. It was found that a single $400{\mu}m$ tall hollow cylindrical microneedle made of electroplated nickel with a wall thickness of $20{\mu}m$, a tapered angle of $3.08^{\circ}$ and a tip inner diameter of $33.6{\mu}m$ has a critical buckling force of 1.8 N. This analytic solution can be used for square or rectangular cross-sectioned column structures with proper modifications.

• Parasites, Hosts and Diseases
• /
• v.32 no.2
• /
• pp.65-74
• /
• 1994

Surface ultrastructure of Pawctrema timonnauini developmental stages was studied using a scanning electron microscope. The metacercariae were collected from the marine clam, Topes phiLippinam and juvenile and adult worms were recovered at 1, 2, 3 and 7 days after experimental infection of mice. The metacercariae had a large oral sucker and characteristic lateral projections. Around the lip of the oral sucker many type I and type II sensory papillae were observed, and type III papillae were located symmetrically on the medial side of the lateral projection. Numerous type I papillae were grouped around the genital pore. The tegumental spines were distributed over the worm surface except the lip of the suckers and genital pore. The 1-day old worm had a well-developed ventral sucker, with 6 type II sensory papillae on its outer surface and another 6 type I papillae on the inner side. Two small type I papillae were seen on the anterior side of the ventral sucker. The genital pore was small and opened separately from the ventral sucker and 15 type I papillae were grouped around it. The 2-, 3-. and 7-day worms revealed that as they grew to be adults, the spine tips became multipointed, the genital pore formed a genital atrium, and the cytoplasmic process became well differentiated. In 2- and 3-day worms 10 type II papillae encircling the lip of the oral sucker, and additional 4 papillae at the dorsal side of 4 dorsal type II papillae were a characteristic feature. The distribution pattern of sensory papillae around the oral sucker and genital pore, and 2 type I papillae on the anterior side of the ventral sucker, was so peculiar in R timonnnuini, that they seem to be useful keys for taxonomic differentiation from other gymnophallids.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.3
• /
• pp.94-113
• /
• 2013

Donggwanwangmyo[East Shrine of King Guan Yu] is the shrine for General Guan Yu from the Shu Dynasty, China. This type of shrine was begun to be built from the Tang Dynasty in China and from 1598 in Korea when the Japanese invaded Korea for the $2^{nd}$ time. Donggwanwangmyo is historically significant because it was jointly constructed by China and Korea in the spring of 1602 after the end of Japanese invasion of Korea. However, almost no research has been conducted about the sculptures standing at Donggwanwangmyo and there are many mistakes concerning the names and materials of these sculptures. This study is conducted to resolve these issues as follows: First of all, it was found that the main building of Donggwanwangmyo enshrines those which were moved from the North Shrine of Guan Yu and the West Shrine of Guan Yu during the Japanese colonial rule of Korea in addition to what was initially placed in Donggwanwangmyo during construction. These relics are assorted and each line of them is displayed in the center and to the east or west of the building. Among the relics, seven sculptures are standing at the center of the main building, among which one sculpture of Guan Yu is made of gold and two sculptures of maids and four sculptures of guards are made of clay. It is particularly noted that the sculptures of Guan Yu and his guards, Guan Ping, Zhou Cang, Wang Fu, and Zhao Lei, represent the portraits of historical characters that actually existed. Moreover, the sculptures of guards are characterized by the fact that they are unlike those in China, but have two pairs of literary men and warriors that stand facing each other as is the case in the royal mausoleums constructed during the Joseon Dynasty. Second of all, the sculptures from Donggwanwangmyo were carved in 1602, but their costumes and equipment were derived from the paintings from the Tang and Song Dynasties. Some decorations from the Ming Dynasty are also reflected in the sculptures. It implies that Donggwanwangmyo was partially modeled after the Shrine of Emperor Guan Yu[Gwanjemyo] in Jiezhou which was rebuilt in 1593 by Emperor Sinjong of the Ming Dynasty and that the secular and dramatic patterns of the Qing Dynasty are prevalent in the said sculptures based on the patterns of the Ming Dynasty because all the sculptures at the Shrine in Jiezhou were constructed when the Qing Dynasty ruled between the $18^{th}$ and the $19^{th}$ Centuries. In conclusion, it was found that sculptures from Donggwanwangmyo were created in 1602, that they follow the ancient traditions attested by the paintings of Korean and Chinese sculptures, and that they are very valuable in art history since they retain the original forms of the Shrine of Guan Yu built during the Joseon and Ming Dynasties.

• Economic and Environmental Geology
• /
• v.55 no.5
• /
• pp.551-561
• /
• 2022

Geophysical exploration methods are very useful for generating high-resolution images of underground structures, and such methods can be applied to investigation of buried cultural properties and for determining their exact locations. In this study, image feature extraction and image segmentation methods were applied to automatically distinguish the structures of buried relics from the high-resolution ground-penetrating radar (GPR) images obtained at the center of Silla Kingdom, Gyeongju, South Korea. The major purpose for image feature extraction analyses is identifying the circular features from building remains and the linear features from ancient roads and fences. Feature extraction is implemented by applying the Canny edge detection and Hough transform algorithms. We applied the Hough transforms to the edge image resulted from the Canny algorithm in order to determine the locations the target features. However, the Hough transform requires different parameter settings for each survey sector. As for image segmentation, we applied the connected element labeling algorithm and object-based image analysis using Orfeo Toolbox (OTB) in QGIS. The connected components labeled image shows the signals associated with the target buried relics are effectively connected and labeled. However, we often find multiple labels are assigned to a single structure on the given GPR data. Object-based image analysis was conducted by using a Large-Scale Mean-Shift (LSMS) image segmentation. In this analysis, a vector layer containing pixel values for each segmented polygon was estimated first and then used to build a train-validation dataset by assigning the polygons to one class associated with the buried relics and another class for the background field. With the Random Forest Classifier, we find that the polygons on the LSMS image segmentation layer can be successfully classified into the polygons of the buried relics and those of the background. Thus, we propose that these automatic classification methods applied to the GPR images of buried cultural heritage in this study can be useful to obtain consistent analyses results for planning excavation processes.