• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.111-114
• /
• 1999

The twisting and extrusion process of the product with involute helical fin from the round billet is developed by the upper bound analysis. The twisting of extruded product is caused by the twisted die surface connecting the die entrance section and the die exit section linearly. In the analysis, the internal shear surface is defined as the curved twisted plane from the taisting of die surface and the shear work is calculated by the consumption of shear energy The increase rate of angular velocity is determined by the minimization of plastic work. The results of the analysis show that the angular velocity of the extruded product increases with the die twisting angle, the reduction of area, and decreases with the die length, the friction condition.

• Transactions of Materials Processing
• /
• v.8 no.2
• /
• pp.143-151
• /
• 1999

The twisting and extrusion process of the product with trapezoidal helical fin from the round billet is developed by the upper bound analysis. The twisting of extruded product is caused by the twisted die surface connecting the die entrance section and the die exit section linearly. In the analysis, the rotational velocity in angular direction is assumed by the multiplication of radial distance and angular velocity. The angular velocity is increased linearly by axial distance from the die entrance. The increase rate of angular velocity is determined by the minimization of plastic work. The results of the analysis show that the angular velocity of the extruded product increases with the die twisting angle, the reduction of area, and decreases with the die length, the friction condition.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.4
• /
• pp.417-426
• /
• 2010

This paper describes the 6-way power divider to be used as a feeding structure of the waveguide array antenna generating the plane wave at the near distance. The SMA connector has been connected at the center of the power divider in order to feed the radiating element. The six output ports made of waveguide are positioned on the peripheral of the divider. This paper proposes the method utilizing the inductive post in order to decrease the return loss. The height of the feeding pin, the diameter of the inductive post, and the distance between the feeding pin and inductive post have been investigated, and as a result, the power divider has been optimized. The simulated and measured results show the low return loss of about -40 dB. The calculated and measured transmission coefficients are -7.78 dB and -8.06 dB, respectively. The output power of the six waveguide port show equal-amplitude and equal-phase distribution. Since the power divider proposed in this paper can be expanded to the divider having several output ports, it could be easily applied to the various array antennas.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.3
• /
• pp.28-34
• /
• 2001

To improve the skirt characteristic of the high-temperature superconducting filter, we proposed a structure of cascading two independent hairpin-comb filters with an identical frequency response. Resonators of the cascaded filter are arranged in the shape of a diamond so that it minimizes the cross coupling between the resonators. This structure can be used effectively to improve the skirt characteristic of the filter in limited area of a circular wafer. The simulated skirt characteristic of the 18 pole cascaded filter is more than 40dB/MHz attenuation below and above the passband.

• Journal of Veterinary Clinics
• /
• v.31 no.6
• /
• pp.523-526
• /
• 2014

Three dogs were admitted for repair of bone fracture. Case 1 (Maltese, 1.8 kg, intact female, 5-month-old) and case 2 (poodle, 3.0 kg, intact female, 6-month-old) had non-weight bearing lameness in the left pelvic limb, and case 3 (mixed, 3.3 kg, intact female, age unknown) had non-weight-bearing lameness in the left thoracic limb. On orthopedic examination, there was pain, crepitus, palpable instability and substantial soft tissue swelling on the affected side. No neurological deficits were identified. Radiographs revealed left proximal metaphyseal tibial and fibular fractures in cases 1 and 2, and left proximal metaphyseal radial and ulnar fractures in case 3. All cases had closed long-bone fractures with short juxta-articular fracture segments. Under fluoroscopic guidance, proper placement of the ring fixation elements was confirmed during surgery. Two or three rings were used to stabilize fractures with traditional circular external skeletal fixators (CESF). Postoperative radiographs showed acceptable alignment and apposition of the previously identified fracture. Time to radiographic union ranged from 5 to 14 weeks and there were no signs of implant failure or pin tract infection. Functional outcomes were excellent in all cases. CESF can be successfully used to reduce short juxta-articular fractures in which bone plates or external skeletal fixation cannot be applied.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.2 no.2
• /
• pp.11-18
• /
• 1991

In this paper, the analysis of arbitrarily shaped microstrip antennas is described. The analysis method is based on the transmission - line matrix representation for the interior problem and the moment method for the problem along the peripheries of the patch. Using this method, the input impedance and other antenna parameters are calculated and compared with experimental results for a circular and an equilateral triangular microstrip antenna. For all of the results, theoretical and expreimental results are in good agreement and the validity of the method is confirmed. This analysis can also be used to analyze microstrip antennas with shorting pins.

• Transactions of Materials Processing
• /
• v.14 no.5 s.77
• /
• pp.444-451
• /
• 2005

A new extrusion process of the circular section product with helical fins could be developed by rotating extrusion die. The twisting of extruded product is caused by the twisted conical die surface connecting the die entrance section and the die exit section linearly. But, until now, because the process has used fixed extrusion die, it needs high pressure in order to twist billet and form fin shape on the surface of billet. So, during extruding billet, in order not to twist billet, the extrusion die is needed to rotate itself instead of twisting of billet. It is known that it is possible to reduce extrusion load of product with helical fins by analysis and experiments using rotating die. And it is known that, through the extrusion load analysis by $DEFORM^{TM}-3D$ software, optimal rotational velocity of rotating die can be obtained according to reduction ratio of area and twisted angle of die. And experiments and analysis using rotating extrusion die show that the twisted angle of product can be controlled by twisted angle of extrusion helical die and the rotational velocity of extrusion helical die.

• Tribology and Lubricants
• /
• v.31 no.5
• /
• pp.189-194
• /
• 2015

This paper focuses on the conformal contact problem. A typical example of conformal contact is the contact between a pin and hole. In particular, this paper focuses on the condition for assuming a contact stress field to be a Hertzian pressure profile by using well-known classical solutions associated with Hertzian contact. Persson first developed the conformal contact analysis method around half a century ago, but there have been no significant improvements since then. The present research also adopted this method, but developed new solutions from the viewpoint of application to structural design. The analysis began with a comparison between Persson°Øs conformal contact stress and the Hertzian stress fields. The next step was to check the differences in the normalized stress values of both. This study used the tolerance for the difference in the peak stresses of Persson°Øs solution and the Hertz solution to validate the Hertzian assumption. This gave the range for the difference in radii of the pin and hole when the contact force and mechanical properties of the material are specified. The results showed that, at a tolerance of 5%, the Hertzian assumption is valid if half of the contact angle is less than 35°ý. In addition, the Hertzian assumption holds even for a relatively long contact length, in contrast to the general incomplete contact problem. This paper discusses these results along with other aspects of the application to the design.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.4
• /
• pp.571-580
• /
• 2020

In this study, an experimental study on storage media for thermal energy storage system was conducted. For thermal energy storage medium, concrete has excellent thermal and mechanical properties and also has various advantages due to its low cost. In addition, the ultra-high strength concrete reinforced by steel fibers exhibits excellent durability against exposure to high temperatures due to its high toughness and high strength characteristics. Moreover, the high thermal conductivity of steel fibers has an advantageous effect on heat storage and heat dissipation. Therefore, to investigate the temperature distribution characteristics of ultra-high-strength concrete, concrete blocks were fabricated and a heating test was performed by applying high-temperature thermal cycles. The heat transfer pipe was buried in the center of the concrete block for heat transfer by heat fluid flow. In order to explore the temperature distribution characteristics according to different shapes of the heat transfer pipe, a round pipe and a longitudinal fin pipe were used. The temperature distribution at the differnent thermal cycles were analyzed, and the thermal energy and the cumulated thermal energy over time were calculated and analyzed for comparison based on test results.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.352.1-352.1
• /
• 2016

양자점은 나노미터 크기의 반도체 결정으로 밴드갭에 따라 광학적, 전기적 성질이 달라지는 독특한 성질을 가지는 형광물질으로 활발히 연구되고 있다. 중금속을 기반으로 한 양자점은 높은 발광효율과 광안전성을 가지며, 가시광선 영역에서 빛을 내는 특징을 가지고 있다. 그러나 중금속을 사용하기 때문에 독성이 있어 인체나 환경에 유해하여 응용 연구에 제한적이다. 반면에, 탄소 기반의 양자점은 중금속 기반의 양자점과 비슷한 성질을 가질 뿐만 아니라, 높은 용해도와 낮은 독성으로 인해 생체적합성이 높다는 장점이 있다. 이를 이용하여 발광다이오드(LEDs), 태양전지, 광촉매 뿐만 아니라 바이오이미징, 바이오센서 등 생물학분야에도 응용 될 수 있다. 본 연구에서는 Bottom-up 합성 방법으로 유기전구체를 이용하여 질소를 함유하고 있는 양친매성 탄소 양자점(N-GQDs)을 합성하였다. 합성에 사용한 유기전구체는 기존에 보고된 유기전구체와 다르게 반응 진행 중에도 pH 측정 결과 중성을 나타내며, 반응 온도($225^{\circ}C$)와 유사한 온도에서도 pH 값은 여전히 6.0 이상의 값을 나타냈다. 중성을 띄는 특징으로 인해 추가적인 산제거 과정이나 표면안정화 과정이 필요 없다는 장점을 가지고 있다. 합성된 N-GQDs는 높은 결정성의 원형구조를 가지며, 원자힘현미경(AFM) 분석을 통해 높이가 ~ 1.5 nm 미만으로 3층 이하의 두께로 형성되었음을 확인하였다. 또한, 적외선 분광법(FT-IR) 분석을 통해 O-H기, 방향족 고리의 C = C (또는 C = N)기 및 C-N기가 각각 ~3250, ~1670과 ~1140 cm-1에서 확인할 수 있다. 합성된 양자점을 유기태양전지의 active layer에 소량(2 wt%) 첨가하여 양자점의 광학적, 전기적 성질을 확인하였다. 비교군 유기태양전지보다 N-GQDs가 첨가된 유기태양전지의 외부양자효율(PCE)이 7.3%에서 8.4%로 약 20%가 증가하는 것을 보였다. 이는 양자점이 상대적으로 흡수가 약한 단파장 영역의 빛을 흡수하고 PL을 내어 active layer로 에너지 트랜스퍼 현상이 일어나 전자전달을 원활하게 해 주기 때문이다. 앞으로 본 연구의 가능성과 추가적인 연구를 통해 더 많은 분야에 응용되기를 기대한다.