• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.8 s.350
• /
• pp.103-109
• /
• 2006

In this paper, single-feed equilateral triangular microstrip antennas(ETMA) for circular polarization(CP) are designed and studied experimentally. It is demonstrated that by embedding a narrow slot or a cross of unequal slot lengths in the triangular patch circularly polarized radiation RHCP(right-hand circularly polarized wave), LHCP(left-hand circularly polarized wave) of microstrip antennas can easily be achieved using by strategically positioned coaxial single probe feed. And the size of a triangular microstrip patch antenna is smaller than that of a conventional rectangular or circular patch at a given frequency. A single-feed ETMA with a horizontal narrow slot is printed on the substrate of 60 mils thick and the other ETMA with a corss slot of unequal slot lengths is printed on the same substrate. The antenna radiation characteristics are calculated by ENSEMBLE(Ver. 5.0) software, and compared with the experimental results. This results show that the antenna size reduction of about $17%{\sim}2l%$ is obtained as compared to the regular-size CP design.

• Proceedings of the Korea Society of Costume Conference
• /
• 2003.05a
• /
• pp.34-34
• /
• 2003

본 연구는 체형의 특성이 현저히 나타나는 40~50대의 Plus-size 여성을 대상으로 체형의 특징이 고려된 치수체계에 대해 맞음새가 우수한 재킷을 개발하고, 이 원형을 토대로 하여 체형의 단점을 보완할 시각적 효과를 연구하기 위해 Plus-size에 해당하는 여성을 선정하여 수트(suit)를 제작한 후 착의 평가하여 Plus-size에 적합한 수트를 제안하는데 목적을 두고 있다. 결과를 요약하면 다음과 같다. 1. Plus-size 여성의 착용실태를 파악하기 위해 실시한 착용실태 조사는 판매자의 측면의 심층면접과 소비자 측면의 착장조사로 구분하여 조사하고 분석하였다. 착용실태조사 결과, Plus-size 여성은 의복구매시 맞음새와 편안함을 중시하고 상완부와 어깨의 두께, 가슴둘레와 복부의 비만등의 체형단점을 갖게 되므로 판매자측에서는 의복제도 시에 등품, 앞품, 상완부, 복부의 여유분을 고려하고 있었다. 시각적 효과로는 세미피트 스타일의 프린세스 라인과 허리선+20, 30cm의 재킷길이, 그리고 테일러드 칼라, 스테인 칼라, 라운드 네크라인이 판매자과 소비자의 양측면에서 선호되고 있었다. 2. Plus-size 여성의 체형에 맞음새가 우수한 재킷원형을 개발하기 위해 Plus-size 여성복의 재킷 원형 중 4종의 기존원형을 선정하고, 착의 피험자 3인을 대상으로 3차에 걸친 착의실험을 통해 연구 원형을 개발하고 평가단을 구성해 객관적인 평가 33문항에 대한 외관 관능검사를 실시하였다. 1) 가슴둘레 여유분을 8~9cm, 허리둘레 여유분을 6~7cm, 엉덩이둘레 여유분을 6~8cm로 적용하여 맞음새를 향상시켜 날씬해 보이는 효과를 높였다. 2) 진동깊이 계산식은 (B/10+10.5)+2cm 적용하고, 진동두께 계산식은 (B/8-1.5)+2cm를 적용함으로써 진동깊이와 진동두께의 편차가 작아짐으로 인해 소매부위와 진동부위의 맞음새를 향상시켰다. 3) 가슴둘레의 증가에 따라 등길이에 앞길이 치수를 증가시키는 계산식을 설정하여 앞가슴둘레의 맞음새를 향상시켰다. 4) Plus-size여성의 경우 허리부분의 신체적합성을 높이기 위하여 사이드 판넬(side panel)의 재킷원형으로 하였다. 앞 허리와 배 부분의 지방 침착이 크므로 앞 허리둘레 다아트 폭과 앞판 사이드 판넬(side panel) 솔기 다아트 폭을 작게 설정하고, 뒤판 사이드 판넬 솔기 폭을 크게 설정하였다. 5) 어깨끝점 사이길이는 다른 부위의 체지방 침착과 같이 비례적으로 증가하지 않으므로 표준체형에 비해 좁게 설정하였다.

• Fashion & Textile Research Journal
• /
• v.6 no.3
• /
• pp.399-403
• /
• 2004

Education of clothing and textiles in the university is various according to the purposes. Among that clothing construction and practice is what is needed the most in understanding the process of apparel producing, and is the basic subject of areas from apparel designs to quality management. Producing apparel starts from planning the bodice pattern according to the human body shape. Basic bodice pattern should be highly practical so that production of all items of apparel patterns can be possible. Also, a basic bodice pattern needs to be planned in the way that even beginners can use it by classifying sizes according to each body measurements. Thus in this study. bodice patterns will be produced in way of draping method subjecting university students in early 20s. standardized and classified sizes will be calculated from it and bodice pattern made by studied flat pattern method will be examined and compared so that finally suitability will be compared. As a result of examining and comparing bodice patterns made by draping method and studied flat pattern method on the model of the human body produced by plaster method, sizes were classified into 5 levels. As a result of evaluation of creation. satisfying consequence from various body shape was acquired and it is expected of the beginners who are stating from clothing construction and practice to be educated by using the result of this study.

• Journal of Mushroom
• /
• v.2 no.1
• /
• pp.33-37
• /
• 2004

To develop neohaplonts for Ganoderma breeding, protoplasts were isolated from dikaryotic mycelium and regenerated. Selection rate of neohaplonts varied between ASI7074, ASI7091, ASI7094, ASI7100 and ASI7115, showing 5.24% on the average. Auxotropic mutants from Ganoderma monokarions were recovered by UV irradiation on protoplasts. Protoplast survival rates were 1.9% ASI 7074, 0.17% ASI 7091, and zero percent ASI 7100 using 300 second irradiation. Four auxotrophic strains were recovered from 1,536 colonies screened that will be further utilized for protoplast fusion and transformation.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.23 no.2
• /
• pp.155-166
• /
• 1990

There have been many problems like plasmolysis in the ultrastructural studies with kelps. The present study was conducted with series of different fixatives and buffer solutions and several resins to solve the plasmolysis phenomena. The fixative of 1470 mosmol($3\%$ glutaraldehyde, $2.4\%$ paraformaldehyde in 0.05M cacodylate buffer with 0.2M sucrose and $0.5\%$ caffeine at pH of 7.2) showed the least frequency of plasmolysis. The relationship between the concentration of primary fixatives and the frequency of plasmolysis was not found. With above fixative the possibility of plasmolysis during infiltration period was not identified using ultra-low viscosity resin. Generally, the kelp(Laminaria religiosa) contains a lot of mucilage, which interupts the infiltration of fixative. The possible physiological mechanisms related with mucilage secretion may be unable to fix the region of plasmalemma properly.

• Microbiology and Biotechnology Letters
• /
• v.32 no.2
• /
• pp.101-109
• /
• 2004

In order to enhance the productivity of AVM $B_{la}$ produced by Streptomyces avermitilis as a secondary metabolite, we established a basic protocol necessary for protoplast fusion with high-producing strains as a fusion partner, and then obtained various kinds offusants by adopting a massive strain-development procedure (a miniaturized strain screening system). An alternative fusion method using UV and/or NTG mutation of protoplasts was developed to screen genetic recombinants without specific selectable markers. In this method, the mutants obtained by protoplast fusion after UV and/or NTG treatment (95% death rate) of the respective fusion partner (protoplasts of the respective mutants resistant against L-isoleucine antimetabolites such as O-methylthreonine and/or azaleucine) were regarded as DNA-recombined protoplast fusants. Notably it was demonstrated that most of the protoplast recombinants obtained by the UV mutation method were able to biosynthesize higher amount of AVM $B_{la}$ , reaching almost three times higher level (almost equal to the industrial productivity), compared to the average AVM Bla amount of the parallel mother strains.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.3
• /
• pp.306-316
• /
• 1997

Embryogenic calli were induced from mature seed scutella of anther culture-derived rice variety Zhonghua 8. Cell suspension cultures were initiated from friable embryogenic calli and utilized as source material for protoplast isolation. Generally, the older and finer cell suspensions gave higher protoplast yields than younger suspension cultures. Protoplasts exhibited sustained cell division and formed microcalli when cultured in KPR medium supplemented with 0.5 mg $l^{-1}$ 2,4-D, 1.0 mg $l^{-1}$ NAA and 0.5 mg $l^{-1}$ zeatin using the agarose embedding procedure without feeder cells. Protoplast plating efficiencies ranged from 0.20 to 0.54％. Microcalli were transferred to MS medium supplemented with 2.0 mg $l^{-1}$ kinetin and 0.5mg $l^{-1}$ NAA for plant regeneration. The regeneration frequencies were 2 to 12％, depending on the cell suspension lines of Zhonghua 8. The plants were transferred to the glasshouse and were fertile.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.1
• /
• pp.117-120
• /
• 1999

High yields of protoplasts were obtained following enzymatic digestion of the vagetative thalli of marine green alga Monostroma nitidum. The enzyme mixtures containing $4\%$ Cellulase R-10+$3\%$ Macerozyme R-10+$3\%$ Abalone acetone power produced $4.41\times10^6$ protoplasts per 300 mg of fresh tissue. The highest yield of protoplasts was obtained by 270 minutes treatment of the thalli in enzyme solution. Freshly isolated protoplasts were spherical in shape and ranged between $13\~33\mu$m in diameter. The high efficiency of differentiation were obtained by incubating freshly isolated protoplasts in 0.4 M mannitol f/2 medium for 7 days and then transferring to 0.2 M mannitol f/2 medium. Protoplasts began to form new cell walls three days after initial culture and began to germinate after 10 days, and then form a leafy thallus after further culture in f/2 medium. The addition of antibiotics in media inhibited the differentiation of protoplasts in culture.

• Korean Journal of Microbiology
• /
• v.22 no.1
• /
• pp.49-56
• /
• 1984

Formation and regeneration of protoplasts by Novozym 234 from Kluyveromyces fragilis N100 and Candida pseudotropicalis CBS607 were studied. This enzyme was more effective on cells grown at exponential phase than those at stationary one to convert intact cells into protoplasts. As osmotic stabilizer, ammonium sulphate was suitable for not only protoplast formation but also regeneration in K. fragilis as well as in C. pseudotropicalis. Optimal enzyme concentration was 3mg per ml in K. fragilis and 1~3mg per ml in C. pseudotropicalis, respectively. After the exposure of K. fragilis cells to 3mg per ml of enzyme for 3hr at 30$^{\circ}C$ , approximately 95% of protoplast formation of all observed cells was obgained, while about 100% from C. pseudotropicalis under the same condition was produced. The regeneration frequency of protoplasts by this enzyme was much lower than that by snail enzyme(Glusulase) although Novozym 234 converted cells from above two species into protoplasts free of cell debris effectively, compared with Glusulase. Novozym 234 appears to be suitable for subcellular fractionation to obtain nuclei or other organelles rather than protoplast regeneration.

• Journal of the Korea Concrete Institute
• /
• v.11 no.3
• /
• pp.81-88
• /
• 1999

In order to properly evaluate the shear strength of reinforced concrete circular columns due to the transverse shear reinforcement, the average of fractions of forces generated along the circular transverse hoops across the shear failure plane in the loading direction is calculated. For this, the center-to-center diameter of circular transverse hoops. spacing and the crack angle measured to the column longitudinal axis are considered. Using these variables, an equation representing the effective section area of circular transverse shear steel is proposed. The study result shows that the constant parameter. used for the calculation of the effective section area of circular hoops over the last 10 years, should not universally be applied any more. The use of the constant parameter may not seriously do harm to the evaluation of shear strength for circular columns with non-seismically designed transverse hoop reinforcement, since it gives slightly conservative results. However. for well-confined circular columns with close spacing or circular steel jacketing. it gives about 20% overestimation of the shear capacity contributed by the transverse hoop steel.