• Journal of the Korean Wood Science and Technology
• /
• v.19 no.1
• /
• pp.31-63
• /
• 1991

It was proved that in conventional kiln drying of disks piling position in the kiln exerted a great influence on drying rates, and the larger the variation of disk diameter, the more undulating drying rates of disks. While in vacuum drying disks there was no influence on drying rates. By the end-wrapping treatments and the radial direction of disks tangential surface stresses in the core of disks were slightly compressive in three species. In control disks the drying stresses distributed into one step-style that compressive stresses in the pith side of 6cm from pith were larger than those in the bark side, while in the disks end-wrapped with Korean paper the drying stresses distributed uniformly, because flow rates of free water in disks had no difference between heart-and sap-wood by obstruction of evaporating water from surface of disks by end-wrapping with Korean paper. And end-wrapping with Korean paper considerably restrained those. Tangential differential shrinkage stresses developed the maximum tensile stress near the bark and with approaching the pith the stresses gradually reduced and changed into compressive stresses in near the pith. At the end of vacuum drying the maximum tangential tensile stresses of disks end-wrapped with Korean paper were smaller than those of control disks, and critical moisture contents causing the V-shaped crack of disks end-wrapped with Korean paper were lower than those of control disks because of the set by obstruction of evaporating water of end-wrapping with Korean paper. In the experiment of vacuum drying stress distribution the disks end-wrapped with Korean paper or aluminum foil in three species were free from V-shaped cracks and control disks were defected very slightly by V-shaped cracks. And also disks end-wrapped with Korean paper were free from heart checks in Alnus japonica and Juglans sinensis, and heart checks were occurred very slightly in others. Especially, not to speak of disks end-wrapped with Korean paper, vacuum drying of disks end-wrapped with aluminum foil prevented effectively drying defects, moreover drying times could be shortened, that is. Ginkgo biloba, Alnus japonica, and Juglans sinensis disks could be dried from green to in-use moisture content in 110 hours, 272 hours, and 407 hours, respectively.

• Journal of the Korean Geosynthetics Society
• /
• v.13 no.2
• /
• pp.31-39
• /
• 2014

The helical pile is a manufactured steel pile consisting of one or more helix-shaped bearing plates affixed to a central shaft. This pile is installed by rotating the shaft into the ground to support structural loads. The advantages of helical piles are no need for boring or grout process, and ability to install with relatively light devices. The bearing capacity of the helical pile is exerted by integrating the bearing capacity of each helix plate attached to the steel shaft. In this paper, to estimate the bearing capacity of moderate-size helical piles, 6 types of helical piles were constructed with different shaft diameter, plate configuration and the penetration depth. A series of field loading tests was performed to evaluate the effect of helical pile configuration on the bearing capacity of helical pile, constructed in two different shaft diameters (i.e. 73 mm and 114 mm). In the same way, the diameter of bearing plate was also changed from 400mm to 250mm with one or three plates. As well, the penetration depth was varied from 3m to 6m to analyze the relation between the penetration depth and the bearing capacity. As a result, not only the increase of the shaft diameter, but also the number or diameter of helix bearing plates enhances the bearing capacity. Especially the configuration of the helix plate is more critical than the shaft diameter.

• Journal of Oral Medicine and Pain
• /
• v.23 no.1
• /
• pp.37-44
• /
• 1998

본연구는 서울대학교 치과병원 구강진단과 악안면 동통진료실에 내원한 환자 중 임상적 검사에 의해 악관절 내장증으로 진단된 총 32명 53개의 측두하악 관절을 대상으로 악관절 조영술이나 자기공명영상을 실시하여 임상적 진단의 정확도를 알아보고 향후 이 결과를 적절히 활용하여 정확한 적응증의 설정에 도움을 주고자 시행되었다. 각 악관절을 임상적 검사, 조영술 및 자기공명영상 검사를 기준으로 정상, 정복성 관절원판 변위, 비정복성 관절원판 변위, 퇴행성 관절 질환을 동반한 정복성 관절원판 변위, 퇴행성 관절 질환을 동반한 비정복성 관절원판 변위로 구분하였다. 이상의 연구를 통하여 다음과 같은 결론을 얻었다. 1. 악관절 내장증으로 내원한 환자 32명, 총 53개 관절중, 정상인 경우가 5예, 정복성 관절원판 변위인 경우가 33예, 비정복성 관절원판 변위인 경우가 14예, 퇴행성 관절 질환을 동반한 정복성 관절원판변위인 경우가 1예이었고, 퇴행성 관절 질환을 동반한 비정복성 관절원판 변위인 경우는 없었다. 2. 악관절 조영술 검사를 시행한 35개의 관절중 임상적 검사와 일치하는 경우는 32개로 그 일치율은 91.1%이었으며, 자기공명영상 검사를 시행한 28개의 관절중 임상적 검사와 일치하는 경우는 20개로 그 일치율은 71.4%이었다. 3. 악관절 조영술 및 자기공명영상 검사를 동시에 시행한 10개 관절중 악관절 조영술 및 자기공명영상검사가 일치하는 경우는 9개이었으며 이중 8개 결과는 임상적 진단과 일치되는 소견을 보였다. 임상적 검사는 악관절 내장증의 진단에 유용한 방법임이 확인되었다. 그러나 임상적으로는 정상으로 진단되었지만 주관적인 증상을 가진 환자에게는 자기공명영상 검사와 악관절조영술 검사 등의 영상진단술식이 필요할 것으로 사료된다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.7
• /
• pp.596-604
• /
• 2011

To improve the total efficiency of centrifugal compressor, it is necessary to reduce the disk friction loss, which is defined as the power loss. In this study, the disk friction loss due to the axial clearance and the surface roughness effect is analyzed and proposed the new empirical equation for the reduction of the disk friction loss. The rotating reference frame technique and the 2-equation k-${\omega}$ SST model using commercial CFD code FLUENT is used for the steady-state analysis of the centrifugal compressor impeller. According to CFD results, the disk friction loss of the impeller is more affected by the surface roughness than the change of the axial clearance. For the minimization of the disk friction loss on the centrifugal compressor impeller, the magnitude of the axial clearance should be designed to the same size compare with theoretical boundary layer thickness and the surface roughness should be minimized.

• 프린팅코리아
• /
• v.12 no.10
• /
• pp.78-79
• /
• 2013

우리나라 최초로 근대 화폐를 찍은 인쇄판(원판)이 한국전쟁 중에 미국으로 불법 반출됐다가 62년 만에 고국으로 돌아왔다. 문화재정(청장 변영섭)은 지난 8월 3일 오후 3시에 대검찰청 대회의실에서 변영섭 문화재청장, 채동욱 검찰총장, 성김 주한 미국대사 등이 참석한 가운데 미국 정부로부터 '호조태환권(戶曺兌換券) 인쇄 원판'을 전달받았다.

• 전기의세계
• /
• v.15 no.1
• /
• pp.22-23
• /
• 1966

본 연구는 두개이상의 원판형철심으로 구성된 철심에 두개 이상의 회전자계 또는 교번, 이동자계에 의한 변전전동, 발전, 전압주정방식으로서 재래의 원판형철심으로 구성된 방식과는 전연 그 원리가 다른것이다. 변압 또는 위상변환에 있어서는 원판형철심 또는 다각형철심에 권선한 두개 이상의 철심과 각계철심 수개로서 동극 또는 이극의 회로를 형성하여 다상 또는 군상을 얻을 수 있는 방법 또는 위상을 변환할 수 있는 방식이다.

• Journal of Oral Medicine and Pain
• /
• v.32 no.3
• /
• pp.305-318
• /
• 2007

To evaluate the treatment outcome after conservative treatment in patients with TMJ disc displacement which is the most common temporomandibular joint arthropathy, the subjects were chosen among the patients who presented to the Department of Oral Medicine of Pusan National University Hospital, diagnosed as TMDs and treated with conservative methods from 1994 to 2006 for 13 years. 88 patients with diagnosis of DD/cR and 60 patients with diagnosis of DD/sR were selected as the experimental group and 74 patients with diagnosis of masticatory muscle disorder (MMD) were selected as the control group. Subjective symptoms and clinical findings were investigated to evaluate and compare the subjects' status at the first visit and the last visit. The results were as follows; 1. Pain, noise, LOM and MCO measurements of DD/cR, DD/sR and MMD groups were markedly improved after conservative treatments including behavior therapy, physical therapy, medication and splint therapy. 2. At the first visit, high score of pain in MMD group, high score of noise and large MCO measurement in DD/cR group and high LOM score in DD/sR group were observed. At the last visit, high score of noise and increased MCO measurement in DD/cR group and high score of pain and LOM in DD/sR group were observed. 3. Among the patients who complained joint sound at their first visit, about 60% showed complete loss of joint sound after conservative treatment 4. DD/cR and DD/sR groups showed satisfactory outcomes after conservative treatments such as behavior therapy, physical therapy, medication and splint therapy while MMD group showed similar treatment outcome irrespective of the treatment modality used. 5. There was no difference in treatment outcomes after conservative treatments when the subjects were classified and compared according to gender, age group and chronicity. 6. MMD showed satisfactory prognosis in 10 treatments in less than 6 months while DD showed favorable prognosis in 10-20 treatments for 6 months to 2 years.

• Journal of the Korean Arthroscopy Society
• /
• v.11 no.1
• /
• pp.50-53
• /
• 2007

Although the lateral discoid meniscus of the knee has been observed frequently, the medial discoid meniscus has very rarely been reported in the literature. A 22-year-old female patient was diagnosed as having a medial discoid meniscus with horizontal tear by means of magnetic resonance image and arthroscopy. The patient was treated by arthroscopic partial meniscectomy.

• Composites Research
• /
• v.18 no.4
• /
• pp.8-13
• /
• 2005

Rotating circular disks are widely used in data storage devices as well as in traditional industrial machines. Faster rotating speed is required in data storage devices for higher data transfer rate. In this Paper an application of composite materials to CD is proposed to increase critical speeds and the strength analysis was performed. A differential equation of displacement is derived for the analytic stress distribution of rotating polar orthotropic disk. The stress distributions for typical GFRP and CFRP disks and the maximum allowable speeds subjected to a constraint of tensile strength are presented in addition to polycarbonate disk. The results show that the application of CFRP to rotating disk can increase the maximum allowable rotating speed but this may not be applicable to GFRP disk.

• The Journal of the Korea Contents Association
• /
• v.5 no.6
• /
• pp.138-145
• /
• 2005

This paper describes a technique for detecting the boundary of the optic disk in digital image of the retina using inward and outward curve evolution. This paper offers medical information about glaucoma progresses. For accurate boundary detection, image inpainting based on texture synthesis removes blood vessels crossing the optic disk. For removing noises and preserving boundary of optic disk in image inpainting process, the anisotropic diffusion filtering is necessary. After pre-processing, the optic disk boundary is determined using inward and outward curve evolution. The experimental results show that the algorithm is effective for detection of optic disk boundary.