• Journal of Biosystems Engineering
• /
• v.29 no.3
• /
• pp.225-232
• /
• 2004

A new type of garlic peeling chamber has been developed which separates and peels garlic cloves using high-Pressure water Jets. The cylindrically-shaped chamber was fabricated with stainless steel plate and has a number of drilled holes, which function as solid-stream spray nozzles, on its interior wall. The chamber was divided into upper and lower section so that water can be applied at different pressures from each section. Three chambers of similar design were tested to evaluate their performances according to various pressure levels. The strongest correlation was observed between the pressure difference(lower-upper) and the proportion of unseparated and completely-peeled garlic cloves. Hanji-type garlic required higher or pressure difference to separate cloves from garlic bulbs than nanji-type garlic. On the other hand, protective leaves(skin) from the cloves were peeled more easily in case of hanji-type garlic. As a result of three consecutive peeling operations, the proportion of completely-peeled garlic cloves changed in the order of 80.1, 82.6, 84.1% in case of hanji-type, and 19.6, 29.1, 40.2% in case of nanji-type garlic.

• Applied Biological Chemistry
• /
• v.38 no.5
• /
• pp.398-402
• /
• 1995

Hardness and adhessiveness of cooked rice were measured with rice grain and rice block methods by texturemeter. In grain method 3, 4 and 5 grains were arranged and subjected to the texture test with a plastic plunger at 95% strain and 0.5mm/sec speed. The hardness were 7.4kg, 7.5kg and 10.0kg respectively and the coefficient of variation ranged from 37.0% to 25.9%, which was mainly due to the irregular geometry of the grains in each specimen set Adhesiveness could not be measured with this method. A cylindrical rice block($H/D=20mm{\times}15mm$) was made for the texture analysis. The hardness was 2.1 kg with coefficient of variation ranging from 2.8 to 7.0%, and the block method was s more reproducible compared to the grain method. A grooved plastic plunger and platform were designed for the measurement of adhesiveness of cooked rice block. The adhesiveness was 0.68kg sec and the coefficient of the variation was 4.6%.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.9
• /
• pp.785-795
• /
• 1990

For the far field radiation pattern of a microstrip array antenna which is conformed to a cylindrical surface and forms an arc array, an approximate analysis method using FOURIER TRANSFORM is presented. In this method, the conformal array antenna is projected on the effective aperture plane and assumed to be an aperiodic array with nonlinear phase tilt. The effective aperture plane includes four end-points of each arc on the cylindrical surface. When the effective aperture ratio which is normalized to the planar type is from 1.0 to 0.9, it is confirmed that this approximate method is valid. To the array on the effective aperture plane, it is assumed that the phase tilt is due to the distance between aperture plne and curvature surface. Specially, when the radius of arc is more than 5 times to its length, the FOURIER TRANSFORM METHOD could be used with only varying scale factors. The results of calculating by approximate method are good agreement with the results of COORDINATE TRANSFORM METHOD and experimentally measured value in the range of -40dB. And, the difference of half power angle is less than 5 degrees when the effective aperture ratio moer than 0.9.

• The Korean Journal of Mycology
• /
• v.37 no.1
• /
• pp.104-107
• /
• 2009

Mitrula paludosa (Geoglossaccae, Helotiales, Ascomycetes) is reported about morphological and ecological characteristics for the first time in Korea. The mushroom fruited on rotten pine leaves or fine twigs in ditches with flowing or standing water in Sogri Mountain National Park from May to June. The apothecium of M. paludosa is 20 to 50 mm tall. The cap is bright yellow to orange, cylindrical to wrinkled ovoid and $5{\sim}10\;{\times}\;10{\sim}20$ mm. The stem is whitish and cylindrical distinctly set off from the cap. The ascospore is hyaline, smooth long elliptical fusoid with round ends and $13{\sim}17\;{\times}\;1.5{\sim}2.0{\mu}m$. The ascus is unitunicate, $90{\sim}110\;{\times}\;5{\sim}6{\mu}m$, and has eight spores biseriately lined to the inoperculate apex. Paraphyses are septate filiform, $95{\sim}120\;{\times}\;1.0{\sim}1.5{\mu}m$, $7{\sim}10{\mu}m$ longer than the asci.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.2
• /
• pp.197-206
• /
• 2023

Recently, the international community, including the International Maritime Organization (IMO), has strengthened regulations on air pollution emissions of ships, and eco-friendly ships are actively being developed to reduce exhaust gas emissions. Among them, rotor sail (RS), a wind-assisted ship propulsion system, is attracting attention again. RS is a cylindrical device installed on the ship deck, that generates hydrodynamic lift using a magnus effect. This is a next generation eco-friendly auxiliary propulsion technology, and Enercon company, which developed RS-applied ships, announced that fuel savings of more than 30% are possible. In this study, optimal installation conditions such as RS spacing and arrangement type were selected when multiple RSs were installed on ships. AR=5.1, SR=1.0, and D_e/D was fixed at 2.0 according to the RS arrangement, and the wind direction was considered only for the unidirectional +y-axis. Regarding arrangement conditions, five conditions were set at 3D intervals in the +x-axis direction from 3D to 15D and five conditions in the +y-axis direction from 5D to 25D. C_L, C_D and aerodynamic efficiency (C_L/C_D) were compared according to the square(□) and diamond(◇) shape arrangements. Consequently, the effect of RS on the longitudinal distance was not significantly different. However, in the case of RS flow characteristics according to the transverse distance, the interaction effect of RS was the greatest when the two RSs almost matched the wind direction. In the case of the RS flow characteristics according to the arrangement, notably, when the wind blew in the forward (0°) direction, the diamond (◇) arrangement was least affected by the backward flow between RSs.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.3
• /
• pp.15-21
• /
• 2017

In the active SONAR system, various studies have been carried out to enhance the resolution of a received signal. In order to obtain higher resolution for detecting a bottoming cylindrical object, the design of a planar array for SONAR is investigated in this paper. It is necessary to employ planar structures for SONAR array to obtain narrower beam pattern which gives high resolution. In this study, the transmit frequency of each acoustic transducer, which consists of an array is 13 kHz. For efficient detection of a target of an asymmetric size, the concept of areal angle is applied, which considers resolution according to both azimuth and elevation angles in array design. In the design, the areal angle is first investigated to satisfy the resolution requirements, and then based on the value of areal angles, the azimuth angle and the elevation angle are calculated respectively to design an array.

• Geophysics and Geophysical Exploration
• /
• v.12 no.2
• /
• pp.215-220
• /
• 2009

Cement based mortars are widely used to improve the soft ground of a dam site, highway construction, and karst voids. The mechanical properties of the mortar are well documented in literature, however very limited work is done on their physical properties such as electrical resistivity which is considered as one of the most important physical property known while improving the soft grounds. In this paper, electrical resistivity of the Portland cement mortars is examined by employing the Wenner technique. Cylindrical specimens with various water/cement ratios (w/c) ranges from 0.35, 0.45, 0.50 and 0.65 were cast and tested. The test results showed that the electrical resistivity of the mortar increases with increasing curing time and decreases with increasing water content and w/c. A reasonable, good relation was found between electrical resistivity and compressive strength of mortar.

• The Korean Journal of Mycology
• /
• v.27 no.3 s.90
• /
• pp.208-210
• /
• 1999

Three species belong to the genus Laboulbenia were collected on Carabidae (Coleoptera) and Harpalidae (Coleoptera) from several regions of Korea. Laboulbenia anoplogenii Thaxter was collected from Stenolophus quinquepustulatus Widemann. The characters of this species are the fourth layer of receptacle consisted of two or three cells and the distal end of its posterior cell projecting upward. The thalli were produced on posterior and anterior legs of the hosts. Laboulbenia habui Terada was collected from Chlaenius variicornis Bates. This species is characterized by the basal cells of the secondary appendage composed of short-cylindrical cells, arranged alternately on a double row. The thalli were produced from the elytra and anterior abdomen of the hosts. Laboulbenia pallida Thaxter was collected from Anisodactylus signatus Panzer. This species is distinguished from other related species by the rounded tip of perithecium and the outer appendage branched on the basal cell. The thalli were produced on the posterior elytra of the hosts.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.1
• /
• pp.10-17
• /
• 2010

The interaction of oblique incident waves with a porous dual semi-cylindrical structure is investigated under the assumption of linear potential theory. The porous dual semi-cylindrical structure consists of two concentric bottom-mounted cylindrical structures that are porous in front half and transparent in back half. By changing porosity, gap, and wave characteristics(wave frequencies, incidence angle), the wave blocking performance as well as the wave loads and the wave run-up are obtained. As a convenient measure of overall wave blocking performance, the root mean square(R.M.S.) of the wave elevation in a sheltered region is used. It is found that the porous semi-cylindrical structure may significantly reduce the wave response in a sheltered region and the wave forces decrease largely compared to the impermeable structure. The dual structure is more effective in reducing the wave response in a sheltered region than the mono type in the region of high frequencies.

• Korean Journal of Optics and Photonics
• /
• v.28 no.5
• /
• pp.221-228
• /
• 2017

We measured the refractive index of a mixed polymer (NOA61, NOA84) in the liquid and solid states. First we made a hollow prism and filled it with UV (ultraviolet) epoxy. Measurement of the apex angle and the minimum-deviation angle gave the refractive index of the liquid polymer. To measure the refractive index of the solid polymer, an additional structure was included in the hollow prism, and the UV epoxy filling in the hollow prism was hardened. In both cases of liquid and solid polymers, the refractive index of the mixed polymer turned out to be proportional to the mix ratio. These results provide a method to vary the focal length of a double stacked cylindrical microlens array using UV epoxy.