• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1995.04a
• /
• pp.93.2-93
• /
• 1995

후두 및 기관지 협착증은 대개가 기도확보를 목적으로 후두 및 기관내에 삽관을 시행하였을 때 삽관튜브에 부착된 cuff내에 압력이 높게 되면 점막에 혈류장애가 초래되고 궤양등의 점막손상이 뒤따르며 여기에 2차감염이 초래되어 육아종과 반흔이 생기면서 결국은 협착이 초래되는 것으로 알려져 있다. 이와 같이 손상된 후두및 기관의 점막에 산도가 강하고 소화효소가 함유된 위액이 역류되어 접촉될 경우 협착이 더욱 조장되리라고 가정할 수 있다. 따라서 위액이 과연 후두 및 기관지 협착증에 관여 한 것인지를 실험적으로 규명해 보고자 하였다. 실험동물은 가토를 대상으로 하여 Urethan마취를 시행하고, 삽관한 다음 합성위액 pH 1.5, 3, 5 짜리 용액을 기관 내에 1시간정도 관류시킨 다음 후두 및 기관을 적출하여 점막상태의 변화를 현미경으로 관찰하였다. 그 결과 산도가 강하고 펩신이 첨가된 합성위액으로 관류한 군에서는 성모의 파괴점막의 궤양, 부종과 염증소견 등이 심하게 관찰되었다. 그러나 산도가 약할수록, 그리고 펩신이 첨가되지 않은 합성위액으로 관류한 군에서는 섬모 및 점막의 손상이나 염증 및 부종등의 소견이 경미하게 관찰되었다. 이러한 결과로 미루어 강한 산도의 위액이 후두 및 기관으로 역류될 경우 협착증의 발생에 깊이 관여하리라고 추측되었다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.10
• /
• pp.34-40
• /
• 2008

In this paper, a device for safety inspection of a guard lamp with an automatic switch which has been recently employed in some local autonomous entities was developed. It is technically enhanced by installing a separate inspection box down below, which allows the inspectors can measure the leakage current, the sound function of the electric leakage breaker(ELB), the insulation resistance and the grounding resistance, on the ground. This inspection box makes the inspectors free from the electric shock by being designed to minimize the potential direct contact with the energized terminals. The deliverables of this paper are expected to contribute to carry out the inspection for the guard lamps safely and effectively.

• Economic and Environmental Geology
• /
• v.25 no.4
• /
• pp.463-477
• /
• 1992

The study area consists of sedimentary and volcanic rocks of Gyeongsang Supergroup, granitoid intrusives, and hornfelses around the granitoids. Granitoid intrusives occur in small stocks in Nijeon-ri, Uggogri, and Yul-ri area. The masses in Nijeon-ri and Uggog-ri are hornblende-biotite granodiorite, biotite granodiorite respectively, and Yul-ri mass is biotite granite. Surrounding sediments of these masses were thermally metamorphosed and contact aureoles were formed. The studied granitoids are considered to be formed by sequential crystallization-differentiation from calc-alkalic granitoid magma. Metamorphic minerals occurring in contact aureole are chlorite, actinolite, epidote, and biotite. Diopside and hornblende are observed in small amount in some lithology around contact aureole. The lithology of contact aureole is predominantly silty and sandy, and characteristic metamorphic minerals were poorly developed because of low temperature metamorphism. Low temperature in contact aureole could be deduced from the facts that the intrusions were small size, shallow depth, low temperature, and rare movement of volatiles from magma.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.386-387
• /
• 2007

ICP-CVD(Inductively Coupled Plasma-Chemical Vapor Deposition)를 이용하여 플라즈마 처리에 따른 Al이 도핑된 ZnO(AZO) 박막의 표면 부착력과 굴절율, 표면거칠기에 관한 연구를 하였다. 플라즈마 처리는 인가전압, 시간을 변수로 하였고 반응 가스는 Ar을 사용하였다. 표면조성은 AFM, 광학적 특성은 UV-Vis 분광계를 이용한 광투과도 측정으로부터 굴절률과 밴드갭을 조사하였고 표면 부착력은 접촉각 분석기(제조사:Kruss)를 사용하여 조사하였다. 플라즈마 처리 시간이 길어짐에 따라 박막 표면의 거칠기가 커지고 부착력은 증가하는 것으로 나타났다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.179-180
• /
• 2007

반도체의 최소 회로 선폭이 감소함에 따라 Contact 저항이 크게 증가하게 된다. Contact 저항을 낮추기 위하여 Tungsten Metal Contact을 일반적으로 사용하며, Si 기판과의 Ohmic 접촉 및 WF6의 Fluorine과 Si 반응을 억제하기 위한 Barrier Metal로 Ti/TiN 이중막을 사용한다. 본 논문에서는 90nm급 이하 제품의 CVD Ti/TiN Barrier Metal이 유발하는 불량 현상과 원인 규명에 대하여 연구하였으며, Ohmic Contact형성을 위해 TiSix형성 최적화 방안에 대해 정리하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.10
• /
• pp.2044-2051
• /
• 2002

In this paper, the deformed shape, the contact forces and the load-displacement curves of the real hollow gasket made of silicon rubber are analyzed using a commercial finite element program MARC. In the numerical analysis, the silicon rubber is assumed to have the properties of the geometric and material nonlinearity and the incompressibility, and the hyperelastic constitutive relations of that material are represented by the generalized Mooney-Rivlin and Ogden models. The outer frictional contact between the hollow gasket and the groove of rigid container and the inner self-contact of the hollow gasket are taken into account in the course of numerical computation. Experiments are also performed to obtain the material data for numerical computation and to show the validity of the mechanical deformation of the hollow gasket, resulting in good agreements between them.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.1
• /
• pp.129-137
• /
• 2000

In this paper, a new method of noncontact measurement has been developed for a 3 dimensional topography in semiconductor wafer, implementing a new optical probe based on the precision defocus measurement. The developed technique consists of the new optical probe, precision stages, and the measurement/control system. The basic principle of the technique is to use the reflected slit beam from the specimen surface, and to measure the deviation of the specimen surface. The defocusing distance can be measured by the reflected slit beam, where the defocused image is measured by the proposed optical probe, giving very high resolution. The distance measuring formula has been proposed for the developed probe, using the laws of geometric optics. The precision calibration technique has been applied, giving about 10 nanometer resolution and 72 nanometer of four sigma uncertainty. In order to quantitize the micro pattern in the specimen surface, some efficient analysis algorithms have been developed to analyse the 3D topography pattern and some parameters of the surface. The developed system has been successfully applied to measure the wafer surface, demonstrating the line scanning feature and excellent 3 dimensional measurement capability.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.8 s.113
• /
• pp.830-839
• /
• 2006

The phenomenon of squeal noise in the disk brake system has been, and still is, a. problem for the automotive industry. Extensive research has been carried out in an attempt to understand the mechanism that causes squeal noise and In developing design procedures to reduce squeal noise to make vehicles more comfortable. In this paper, the study on the analysis of squeal noise is performed by using computer aided engineering to design the anti-squeal noise disk brake system. The first part describes the chassis dynamometer and the testing procedure, and second part explains the finite element model and the complex eigenvalue analysis. Finally, it is shown that the proposed squeal noise analysis could be useful to investigate the design parameters that affect the squeal noise characteristics.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.3 s.120
• /
• pp.235-240
• /
• 2007

In this work, the operational deflection shape(ODS) of an automobile exhaust system is measured by using a recently-developed magnetic sensor. The magnetic sensor is composed of a solenoid and two pairs of permanent magnets generating an antisymmetric magnetic field in the lateral direction inside the solenoid. Lateral movement of a ferromagnetic pipe inside the magnetic field of the suggested sensor induces an electromotive force in the solenoid corresponding to the lateral velocity of the pipe. Due to the simplicity and non-contact characteristics of the magnetic sensor, dynamic behaviors of the structures operating under high temperature such as an exhaust pipe can be efficiently observed. It is shown that the lateral ODS of an exhaust system can be successfully measured by the suggested sensors.

• Journal of Radiation Industry
• /
• v.11 no.3
• /
• pp.123-130
• /
• 2017

Concerns about high radiation exposure to the hands of radiation workers who may contact with radioactive contamination on surfaces in a nuclear power plant (NPP) had been raised, and the Korean regulatory body required the extremity dose estimation during contact tasks with radioactive materials. Korean NPPs conducted field tests to identify the incident radiation to the hands of radiation workers who may contact with radioactive contamination during maintenance periods. The results showed that the radiation fields for contact tasks are dominated by high energy photons. It was also found that the radiation doses to the hands of radiation workers in Korean NPPs were much less than the annual dose limits for extremities. This approach can be applicable to measure and estimate the extremity dose to the hands of medical workers who handle the radioactive materials in a hospital.