• Title/Summary/Keyword: 원인판단주제어

Search Result 24, Processing Time 0.029 seconds

재결서 키워드 분석을 통한 해양사고 위험요인 식별 연구

  • 임광현;백연지;최충정;양지민;고우리;노유나
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • 2023.05a
    • /
    • pp.148-149
    • /
    • 2023
  • 우리나라에서는 매년 2천여 건 이상의 해양사고가 발생하고 있으며, 정부는 해양사고의 발생 현황 및 원인분석을 통해 사고 저감을 위한 정책을 수립하고 있다. 중앙해양안전심판원에서는 '해양사고심판법'에 따라 해양사고의 원인을 조사하여 이를 재결서의 형태로 공개하고 있다. 이번 연구에서는 재결서의 원인판단 주제어를 기반으로 텍스트 마이닝을 수행하여 사고 종류별 해양사고 위험요인을 식별하였다. 도출된 키워드는 해양사고의 발생 원인과 밀접한 관계가 있는 키워드로 볼 수 있으므로, 해양사고의 원인분석 및 사고 예방대책 수립에 활용될 수 있을 것으로 전망된다.

  • PDF

VOC/HAPs Emission Characteristics & Adsorption Evaluation for Paint Products in Busan Area (부산지역 페인트제조시설의 VOC/HAPs 배출특성 및 흡착능 평가)

  • Song, Bok-Joo;Lee, Seung-Min;Cho, Gab-Je;Cho, Jeong-Gu;You, Pyung-Jong;Kim, Gi-Gon
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.34 no.5
    • /
    • pp.316-325
    • /
    • 2012
  • In this study, we suggested adequate control technology by analyzing emission process and main chemical of VOC/HAPs generated from four paint factories in Busan area. And we estimated whether Kapok fiber, which is a natural material, can be commercially used for an absorbent by testing adsorption ability. As a result of this sturdy, above 60% of VOC/HAPs was volatilized and dispersed inside the working place without conducting control system of facilities during manufacturing paints. Concentration profile of VOC/HAPs, which is volatile naturally outside the factories, is surveyed above 70% at Toluene, Ethylbenzene, and Xylene. And a result of evaluation of odor attribution level about the component whose Odor Threshold is known, it is estimated that major cause material of A, B, C factories is Toluene and that of D factory is m/p-Xylene. And that result presented design arguments such as facilities specifications, activated carbon filling volume, and replace cycle of activated carbon as control technology. Also, that result presented emission process improvement such as adsorption of central-controlled ventilation device, installation of inlet flenge, and potable cleaning process. The rate of pollutant adsorption of Kapok fiber, which is natural material, is indicated about 91.9%, 66.7%. That result validated the possibility as replacement of activated carbon.

An Analysis of Engine Failures Using Multivariate Data Analysis Method (다변량해석법을 이용한 기관고장분석)

  • 윤석훈
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.23 no.4
    • /
    • pp.198-203
    • /
    • 1987
  • The basis of all approaches to improve reliability of marine engines exists in analyzing the field data of troubles and failures on marine engines. This paper analyses the data of troubles and failures on marine engines by Principal Component Analysis Method, one of Multivariate Data Analysis Method. The total number of data investigated is 211 and the observation period is 9 years. The analyzed factors are categorized among five groups respectively; electric.automatic control equipments, auxiliary machinery, pipings, refrigerators.air conditioners, and main engine. The failures in main engine are discovered by a definite fact of disorder, on the contrary, the failures in auxiliary machinery, refrigerators and air conditioners are discovered by sensible judgement of the operators.

  • PDF

The Development of Databack PCB Card Test Equipment for HVDC Convertor Station (HVDC 변환설비 Databack PCB Card 점검장비 개발)

  • Lee, B.H.;Park, M.K.;Hwang, K.S.
    • Proceedings of the KIEE Conference
    • /
    • 2008.07a
    • /
    • pp.329-330
    • /
    • 2008
  • 제주-해남간 HVDC 변환설비는 제주 전력수요의 약 40%를 담당하는 주요 설비로, 국내에서는 처음으로 도입되어 상용 운전중인 직류송전 설비이다. 10년간의 변환설비 운전중에 크고 작은 고장이 많이 발생하였으며 PCB Card에 의한 고장은 전체 고장의 약 30%를 차지하고 있다. 본 논문에서는 해남변환소에서 사용중인 VBE (Valve Base Electronics : Thyristor 점호 제어반) Cubicle에 설치된 Databack PCB Card 점검장비 개발내용을 설명하였다. 이 장비 사용시 설비사고 및 고장의 원인을 줄일 수 있고, 카드의 연도별 이력관리를 할 수 있다. 또한 Card의 경년열화 특성을 파악하여 교체시기를 판단할 수 있고 Card 시험시간의 단축이 가능하다. 상기 이외에 점검기술에 대하여 기존 방식과 비교하고 시험기 개발 및 운영사항에 대하여 기술하고자 한다.

  • PDF

A Study of Tire Curing Bladder shaping by Using Finite Element Method (유한요소법을 이용한 타이머 Curing Bladder Shaping엔 관한 연구)

  • 김천식;김항우
    • Proceedings of the Computational Structural Engineering Institute Conference
    • /
    • 1992.10a
    • /
    • pp.3-3
    • /
    • 1992
  • 타이어 Curing공정은 공기압 타이어의 제조시 상당히 정교한 단계를 거쳐서 이루어지며, 이는 타이어 설계에 큰 영향을 줄 뿐만아니라, 타이어의 성능에도 관건이 있다. 본 연구에서는 유한요소법을 이용하여 타이어의 molding 공정을 분석하였다. 유한요소해석 프로그램인 MARC가 Cured 타이어 내부의 Curing Bladder 팽창과정해석에 이용되었다. 비압축성 요소로 Curing Bladder를 모형화하였으며, MARC의 접촉문제해석기법(contact option)을 이용하여 Cured 타이어 내부와 Curing Bladder 외부의 접촉부위를 Simulation하였다. 본 연구의 주요 관심내용으로서는 Curing Bladder의 형상변화에 따른 Curing Bladder의 팽창거동해석과, Cured타이어와 Curing Bladder의 접촉부위에서 얻을 수 있는 접촉압력의 비교.검토이다. 타이어 Curing시 타이어와 Bladder의 Contact과정을 해석하여, 아래와 같은 결과를 도출하였다. Bladder의 형상은 Cylinderical 형상 보다는 Toroidal 형태가 접촉압 분포의 균일성 및 크기 측면에 서 우수한 것으로 판단된다. Curing Bladder의 증심선 부위 보다 이에서 약간 떨어진 부위에서 최대 접촉압력이 발생되며, 이는 타이어 내면의 굴곡현상과 깊은 관련이 있윰 것으로 사료된다. 타이어 Bead부의 Carcass 자연평형현상이 유지된 제품을 얻기위해서는, Side-Bead구간의 접촉압력 증가가 필요하며, 이를 위하여는 Bladder 형상이 Cylinderical 보다는 Toroidal 형태가 유리하고, Bead부의 Gage Down, 전체직경의 증가 및 높이의 증가가 유리한 것으로 판단된다. 본 연구 결과를 이용하여, 타이어 Curing과정에서 발생되는 불량제품의 원인파악 및 타이어 설계자가 원하는 제품생산의 불가능한 원인을 파악하는데 도움을 줄 것이다.를 C의 structure와 pointer를 기반으로 하게끔 변경시키고 이에 따르는 제반 변경 사항을 수정 보완하여 프로그램의 분석을 용이하게 하며 기능의 변경 및 추가가 수월하게 하였고 메모리를 동적으로 관리할 수 있게 하였다. 또한 기존의 smpl에 디버깅용 함수 및 설비(facility) 제어용 함수를 추가하여 시뮬레이션 프로그램 작성을 용이하게 하였다. 예를 들면 who_server(), who_queue(), pop_Q(), push_Q(), pop_server(), push_server(), we(), wf(), printfct() 같은 함수들이다. 또한 동시에 발생되는 사건들의 순서를 조종하기 위해, 동시에 발생할 수 있는 각각의 사건에 우선순위를 두어 이 우선 순위에 의하여 사건 리스트(event list)에서 자동적으로 사건들의 순서가 결정되도록 확장하였으며, 설비 제어방식에 있어서도 FIFO, LIFO, 우선 순위 방식등을 선택할 수 있도록 확장하였다. SIMPLE는 자료구조 및 프로그램이 공개되어 있으므로 프로그래머가 원하는 기능을 쉽게 추가할 수 있는 장점도 있다. 아울러 SMPLE에서 새로이 추가된 자료구조와 함수 및 설비제어 방식등을 활용하여 실제 중형급 시스템에 대한 시뮬레이션 구현과 시스템 분석의 예를 보인다._3$", chain segment, with the activation energy of carriers from the shallow trap with 0.4[eV], in he amorphous regions.의 증발산율은 우기의 기상자료를 이용하여 구한 결과 0.05 - 0.10 mm/hr 의 범위로서 이로 인한 강우손실량은 큰 의미가 없음을 알았다.재발이 나타난 3례의 환자를 제외한 9례 (75%)에서는 현재까지 재발소견을 보이지 않고 있다. 이러한 결과는 다른 보고자들과 유사한 결과를 보이고 있지만 아직까지 증례가 많지 않기 때문에 생존율을 얻

  • PDF

한국기업(韓國企業)의 수익성(收益性)에 관한 연구(硏究) -대주주(大株主)와 소수주주(少數株主)간의 이해갈등(利害葛藤)을 중심(中心)으로-

  • Jo, Seong-Uk
    • KDI Journal of Economic Policy
    • /
    • v.21 no.2
    • /
    • pp.3-54
    • /
    • 1999
  • 1997년의 경제위기는 근본적으로 많은 차입금에도 불구하고 장기간에 걸쳐 낮은 수익성을 보인 기업들이 불황에 직면하여 도산위험이 급증함으로써 발생한 것으로 판단된다. 그러면, 기업들의 수익성은 왜 이렇게 낮은 것일까? 본 연구는 지배대주주와 소액주주간의 갈등이 기업의 수익성을 저하시킨 한 원인으로 작용했다는 가설을 실증적으로 규명하고자 한다. 우리나라 기업들, 특히 기업집단의 경우 지배대주주의 개인소유지분은 높지 않지만 기업경영에 대한 통제력은 매우 강하다. 기업경영에 대한 감시와 책임경영이 확립되지 않는 경제에서 지배대주주가 기업자산을 개인적 이익에 따라 운영하는 경우 편익은 독점하지만 이에 따른 수익성 하락 등의 비용은 다른 주주와 소유 지분율에 따라 공유하게 되므로 사적이익을 추구할 유인이 크다. 본 연구는 1992년부터 1997년까지의 공기업 및 금융기관을 제외한 외부감사대상기업의 재무자료를 기초로 영업이익률, 경상이익률, 그리고 순이익률이 주주간의 이해상충에 의해 어떻게 영향을 받았는가를 분석하였다. 수익성 분석에 있어 상장여부, 자산운영(관계회사 및 비관계회사에 대한 투자), 재벌소속 여부, 기업규모, 재무구조 그리고 산업적 특성 및 기업의 경영 및 사업 전략적 특성을 제어하였다. 다른 조건이 동일하다고 가정하면 상장된 기업의 수익성은 비상장기업보다 낮다. 상장기업의 경우는 대주주의 소유지분이 낮은 반면에 외부주주의 비중이 높기 때문에 대주주가 개인의 이익을 추구하고자 하는 유인이 강하게 작용한 결과로 판단된다. 또한 재벌에 소독된 기업의 수익성은 독립기업들의 수익성보다 낮을 뿐만 아니라 계열회사의 유가증권 및 대여금 등에 대한 투자가 증가할수록 기업의 경상이익률 및 순이익률이 낮아진다. 반면에 비관계회사에 대한 투자자산은 경상이익률 및 순이익률을 높이는 것으로 나타났다. 재벌에 소속된 상장회사가 관계회사에 투자하는 경우는 투자기업의 수익성이 더욱 낮아지는 것으로 나타났다. 관계회사에 대한 투자는 수익성에 기초한 투자가 아니며 대주주의 지분이 낮은 상장기업에서 소액주주의 이익에 반하여 계열사에 대한 투자형태로 자원이 이전되고 있음을 시사한다. 본 논문의 분석 결과는 외부주주와 내부주주간의 이해상충이 기업의 수익성을 저하시킨다는 가설과 일관된다. 따라서 대주주가 개인적 이익을 추구하고자 하는 유인을 견제하고 소액주주의 권리를 강화하도록 지배구조를 확립해야 할 것이다.

  • PDF

A Study on the Development of Collision Avoidance System for Small-Sized Vessel Using WAVE Communication Technology (WAVE 통신기반 소형 선박 충돌회피 보조시스템 개발)

  • KIM, Mong-Ju;OH, Joo-Seok;NAM, Yong-Yun
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.26 no.1
    • /
    • pp.8-14
    • /
    • 2020
  • According to the statistics provided by Korean Maritime Safety Tribunal for the year 2018, the majority of marine accidents in the past four years have occurred in fishing boats and small-sized boats. Negligent behavior resulting from not looking outside and non-compliance with navigation laws are the primary reasons behind ship collisions. Although safety education and training are reinforced to prevent such accidents, they still occur frequently. Hence, technical methods are continuously being developed to reduce ship collisions caused by human cause. The objective of this study is to reduce ship collisions by employing the WAVE communication system, which has short transmitting and receiving periods that can be incorporated for high-speed small-sized vessels. In this study, the suitability of the communication range was examined, and the appropriate range and timing for avoidance motion were accordingly selected, and a control algorithm based on the same was thereby designed. Consequently normal operation of the collision avoidance system was verified by connecting and simulating the proposed WAVE communication router-controller-steering equipment.

Development of Fatigue Performance Model of Asphalt Concrete using Dissipate Energy

  • Kim, Nak-Seok
    • Journal of the Korean Society of Hazard Mitigation
    • /
    • v.10 no.3
    • /
    • pp.39-43
    • /
    • 2010
  • The main objective of this research is to develop a mechanistic performance predictive model for fatigue cracking of asphalt-aggregate mixtures. Controlled-stress diametral fatigue tests were performed to characterize fatigue cracking of asphalt-aggregate mixtures. Performance prediction model for fatigue cracking was developed using the internal damage ratio (IDR) growth method. In the IDR growth method, the general concepts of the dissipated energy, the reference tensile strain, the threshold tensile strain, and the strain shift factor were introduced. The source of the dissipated energy in the fatigue test is from the intrinsic viscoelastic material property of an asphalt concrete mixture and the damage growth within the asphalt concrete specimen. In controlled-stress mode test, the dissipated energy is gradually increased with an increasing number of load applications.

Inhibition of adhesion and biofilm formation in Escherichia coli O157:H7 by diosmin (다이오스민(diosmin)에 의한 병원성 대장균 세포부착 및 생물막 형성 억제)

  • Kim, Hyun Jung;Kim, Seung Min
    • Korean Journal of Food Science and Technology
    • /
    • v.50 no.4
    • /
    • pp.414-419
    • /
    • 2018
  • Escherichia coli O157:H7 is one of the most common foodborne pathogens responsible for outbreaks of hemorrhagic colitis, which can lead to the life-threatening hemolytic-uremic syndrome. In this study, we identified phytochemicals that specifically inhibit the expression of LEE operon in E. coli O157:H7. Among phytochemicals, diosmin decreased the adherence of E. coli O157:H7 towards Caco-2 cells in vitro (p<0.01) and its biofilm formation activity (p<0.05). Quantitative RT-PCR analysis revealed that the transcripts of Ler-regulated genes and genes related to curli production were significantly reduced in the presence of diosmin. However, diosmin does not affect bacterial viability, indicating that the resistance rate to diosmin was remarkably low. Overall, these results provide significant insights into the development of a novel anti-infective agent that is different from conventional antibiotics.

Study on Sediments' Release for Water Characteristics in Agricultural Reservoirs (농업용저수지의 수질 특성에 따른 퇴적물의 용출 영향 연구)

  • Lee, Jin Kyung;Choi, Sun Hwa;Lee, Seung Heon
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2016.05a
    • /
    • pp.499-499
    • /
    • 2016
  • 본 연구는 오염된 농업용 저수지에 대하여 수층에 따른 수질 변화 특성을 조사하고, 저수지 저부의 퇴적물에 대한 용출 실험을 통해 수층별 수질 특성이 퇴적물의 용출에 미치는 영향을 분석하고자 수행되었다. 연구 대상 저수지의 선정은 설치년도 1960년대를 기준으로 이전과 이후로 분류하였으며, 주요 오염원을 축산계와 생활계 오염원으로 분류하여 각 다른 특성을 가진 저수지를 선정하여 조사하였다. 내부 오염 부하량이 수체에 미치는 영향을 평가하기 위해 실시한 용출량 실험 결과, 호기 조건에서 축산계오염원 저수지의 T-P가 미미하게 용출이 일어난 것을 제외하고는 생활계, 축산계오염원 저수지에서 용출이 일어나지 않았다. 반면에 혐기 조건의 경우에는 생활계오염원 보다는 축산계오염원 저수지에서, 1960년대 이후 설치된 저수지에서 보다는 1960년대 이전에 설치된 저수지에서 용출이 크게 일어나는 것으로 조사 되었다. 혐기 조건에서 T-N의 경우 생활계오염원과 1960년대 이후 설치된 저수지에서는 용출이 일어나지 않았으나, 그 외의 항목에서는 모두 용출이 일어나는 것으로 분석되었다. 특히 혐기조건에서는 모든 연구대상 저수지에서 T-P의 용출이 크게 일어나는 것으로 조사되었는데, 이는 부영양화의 주요 영향인자로 작용할 수 있으므로 저수지 저부의 혐기조건이 형성되는 것을 제어?관리해야 할 필요성이 있다고 하겠다. 연구 저수지에 대한 현장 조사 결과, 가뭄의 영향으로 수위가 평년에 비해 상당히 낮았으며, 저수량의 부족으로 저수지 주변의 바닥이 드러나거나 유출이 없는 등의 특징을 보였다. 수심이 낮은 5~7월의 조사 시기에는 표층의 DO 농도가 높음에도 저층부의 DO 농도는 1.2~2.2 mg/L를 나타내 약혐기조건이 형성됨을 확인하였다. 또한 현장측정기(HYDROLAB_Quanta)를 이용한 DO측정시, 저층부 퇴적물의 재부유를 막기 위해 저층경계면에서 30~50cm 윗부분을 측정했다는 점에서 저층부 바닥면의 DO 농도가 더 낮을 수 있다고 추정할 수 있다. 이는 이 시기에 퇴적층에 존재하는 오염물질의 용출이 충분히 일어날 수 있으며, 이후 8~11월에 수계 내 환란 및 순환에 의해 오염물질이 수중으로 이동하게 되고, 수질을 악화시키는 원인으로 작용할 수 있음을 추론할 수 있다. 이와 같이 퇴적되어 있던 오염물질이 계속적으로 용출 및 순환을 해마다 반복한다면 해당 저수지는 장기간 수질 오염 저수지가 될 수밖에 없을 것이다. 따라서 이러한 내부오염부하가 크다고 판단되는 저수지에 대하여 오염퇴적물의 관리가 필요하다고 하겠다.

  • PDF