• Title/Summary/Keyword: 원소의 거동.

Search Result 314, Processing Time 0.039 seconds

Sorption Behavior of Cesium-137, Cerium-144 and Cobalt-60 on Zeolites (제오라이트에 대한 세슘-137, 세슘-144 및 코발트-60 흡착거동)

  • Kim, Seok-Chul;Lee, Byung-Hun
    • Journal of Radiation Protection and Research
    • /
    • v.10 no.1
    • /
    • pp.3-13
    • /
    • 1985
  • The sorption behavior of some typical fission products such as Cs-137, long-lived radionuclide; Ce-144, rare-earth element; and Co-60, corrosion product on zeolite A, zeolite F-9 (faujasite) and amorphous zeolite was determined with the salt concentrations, 0.01 M- to 2.0 M- nitric acid and ammonium nitrate, and the shaking time, 15 minutes interval from 15 minute to 90 minute. Kd values were obtained through the batch experiment. In conclusion, the optimal conditions for isolation and removal of the typical radionuclides are as following: zeolite, amorphous zeolite; concentration, $0.01\;M-HNO_3\;and\;0.1\;M-NH_4NO_3$; pH4; shaking time, one hour; the most effective species, Cs-137.

  • PDF

강원도 탄산수내 희유원소 (REE)의 분포 및 거동

  • 최현수;고용권;배대석;윤성택
    • Proceedings of the Korean Society of Soil and Groundwater Environment Conference
    • /
    • 2002.09a
    • /
    • pp.331-334
    • /
    • 2002
  • 탄산수내 REEs의 함량과 거동특성을 알아보기 위해 암석시료, 탄산수 및 침전물에 대한 REEs 분석을 실시하였다. 탄산수가 산출되는 인접지에서 채취한 암석시료들은 물의 유형에 따라 큰 농도변화를 보여주지 않으며, 대체적으로 LREEs가 부화된 특성을 보여주고 있다. 유형에 따른 탄산수의 REEs 농도변화는 서로 상이한데, Na-HCO$_3$ 유형은 강한 HREE의 부화를 보여주지만, Ca-HCO$_3$ 유형은 HREE의 부화를 보여주지 않고 감소하는 경향을 보이며, 화학적으로 중간 유형에 속하는 Ca-Na-HCO$_3$ 유형 탄산수는 Eu을 제외하고는 전체적으로 flat한 분포를 보여준다. 탄산수에서 침전된 침전물과 침전물을 제거한 물의 REE의 유형은 침전물이 발생되기 전의 탄산수와 유사한 경향을 보이지만, 침전물의 발생으로 인한 특징적이고 강한 anomalies를 보여준다. 침전된 침전물의 REEs 특성은 침전물이 발생되기 전의 원 탄산수와 거의 유사한 분포특성을 보여준다. 반면에 침전물을 제거한 탄산수에서는 탄산염침전물의 침전과 연관되어 매우 강한 Eu anomalies를 보여주며, 대체적으로 HREE가 부화된 특성을 보여주었다. 탄산수내 가장 우세한 REE 종은 CO$_3$$^{2-}$ 종이며, CO$_3$$^{2-}$ 복합체 때문에 REEs의 분별작용 (HREE의 부화)이 일어나는 것으로 판단되 었다.

  • PDF

The study on growth behavior of Nb(C,N) coating layer deposited by TRD based duplex surface treatment on JIS-SUJ2 (TRD 기반 2단 표면 처리법을 통해 JIS-SUJ2 표면에생성된 Nb(C,N)코팅층 성장 거동 연구)

  • Lee, Gyeong-Hun;Gang, Nam-Hyeon;Kim, Gi-Su;Lee, Gang-Sik
    • Proceedings of the Korean Institute of Surface Engineering Conference
    • /
    • 2015.05a
    • /
    • pp.96-97
    • /
    • 2015
  • 확산을 이용한 표면 개질법인 Thermo-Reactive Diffusion(TRD) 기술 기반 2단 표면처리를 통해 고경도의 Nb(C,N) 코팅층을 고탄소 베어링강인 JIS-SUJ2강에 형성시켰다. 2단 표면처리는 암모니아 가스 질화와 분말 확산 코팅법으로 구성된 2step 열처리이다. 본 연구에서는 가스질화 화합물층의 두께가 코팅층 성장 거동에 어떤 영향을 미치는지 알아보기 위해서 $550^{\circ}C$에서 3, 6시간 암모니아 가스 분위기에서 가스질화를 실시하고, $900^{\circ}C$에서 3시간 분말 확산법을 통해 표면 코팅층을 형성하였다. 생성된 코팅층의 형상과 두께 측정을 광학현미경(OM) 과 주자전자현미경(SEM)을 통해 한 결과, 가스 질화는 약 10uu와 16um, 최종 코팅층은 약 정도 생성이 되었음을 확인하였다. 코팅층의 성분 분석은, EDS, FE-EPMA, XPS 분석을 통해서 실시하였다. EDS와 FE-EPMA 원소 mapping을 통해 모재에 비해 높은 농도의 Nb, C 그리고 N이 코팅층 내부에 존재함을 확인하였다. XPS분석의 결합에너지 peak를 통해 NbC, NbN 그리고 Nb-oxide가 생성이 되었음을 분석하였다. 생성된 코팅층의 경도는 low mode에서 10회 측정한 후 평균값을 내었고, 각각 Hv이었다.

  • PDF

실시간 비저항 측정을 통한 N-doped $Ge_2Sb_2Te_5$ 박막의 결정화에 대한 연구

  • Lee, Do-Gyu;Do, Gi-Hun;Son, Hyeon-Cheol;Go, Dae-Hong
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2010.02a
    • /
    • pp.136-136
    • /
    • 2010
  • $Ge_2Sb_2Te_5$ (GST)는 광학 스토리지 및 PRAM(Phase-change Random Access Memory)에 적용 가능한 대표적인 상변화 물질이며 상변화 거동에 대한 다양한 연구가 진행되고 있다. 차세대 비휘발성 메모리로 각광을 받고 있는 PRAM의 경우 저전력 그러나 향후 고집적, 고성능 PRAM 소자구현을 위해서는 Reset 전류 감소를 통한 소비 전력 감소, 인접 셀간의 'cross talking'을 방지할 수 있는 열적 안정성 개선 등의 문제점들을 해결해야 한다. GST 물질의 전기적, 열적 특성을 조절하여 이러한 문제를 해결하기 위하여 GST 물질에 이종의 원소를 첨가하는 연구가 활발히 진행되고 있으며, 특히 질소 첨가에 의해 결정 성장 억제를 통한 결정화 온도 증가, 결정질의 저항 증가 등의 보고가 있었다. 본 연구에서는 질소를 첨가한 N-doped $Ge_2Sb_2Te_5$ (NGST) 박막의 상변화 거동을 규명하고 GST 박막과 비교하여 첨가된 질소의 영향을 분석하고자 한다. D.C Magnetron sputtering 방법으로 증착된 GST와 NGST 박막을 등온으로 유지하여 각 온도별로 열처리 시간 증가에 따른 비저항을 실시간으로 측정하여 GST와 NGST 박막의 상분율을 계산하고 Kissinger 모델을 이용하여 effective activation energy ($E_a$)를 구하였다. GST와 NGST 박막의 $E_a$는 각각 $2.08\;{\pm}\;0.11\;eV$$2.66\;{\pm}\;0.12\;eV$로 계산되었다. 따라서 첨가된 질소에 의해 NGST 박막의 결정화를 위하여 GST 박막의 경우보다 더 큰 활성화 에너지가 필요하다.

  • PDF

Fractionation of Heavy Metals by Early Diagenesis in Deep-sea core Sediments from the Korea Deep-sea Environmental Study (KODES) area, NE Equatorial Pacific (한국심해환경연구(KODES) 지역 표층 퇴적물 중 속성작용에 의한 금속의 분화)

  • Park, Sung-Hyun;Jung, Hoi-Soo;Park, Chan-Young;Lee, Kyeong-Yong;Kim, Ki-Hyun
    • The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
    • /
    • v.4 no.3
    • /
    • pp.215-225
    • /
    • 1999
  • To study the vertical variations of major elements, trace elements and rare earth elements(REEs) contents in deep-sea sediments, six cores from Korea Deep-sea Environmental Study area(KODES) were analyzed. Topmost sediment layers of KODES area are divided into two Units; brown-colored and peneliquid Unit I and pale brown-colored and relatively solidified Unit II. Contents of major elements, REEs, Cu, Sr and Rb in each Unit are almost same, while contents of Mn, Ni and Co in Unit I are two or three times higher than those in Unit II. R-mode factor analysis represents that surface sediments are composed of alumino-silicate phase (AI-Ti-K-Mg-Fe-Rb-Ce), apatite phase (Ca-P-Cu-Sr-Trivalent Rare Earth Elements) and Mn-oxide phase(Mn-Ni-Co). Factor scores in silicate and apatite phases in each Unit are nearly same, whereas those in Mn-oxide phase in Unit I is higher than those in Unit II. While NilCu ratio in Unit I is two times higher than that in Unit II. We interprete the geochemical fractionation of Ni and Cu as a result that Ni can be remobilized in oxygen-depleted micro-environment in Units I and II and then easily reprecipitated in Unit I, while most of Cu supplied together with organic material is decomposed mostly in Unit I and sorbed into apatite.

  • PDF

The Effects of Carbonate Minerals in Gully-pot Sediment on the Leaching Behavior of Heavy Metals Under Acidified Environment (우수관퇴적물에 함유된 탄산염광물이 산성환경에서의 중금속 용출거동에 미치는 영향 평가)

  • 이평구;유연희
    • Economic and Environmental Geology
    • /
    • v.35 no.3
    • /
    • pp.257-271
    • /
    • 2002
  • One of the main interests in relation to heavily contaminated gully-pot sediment in urban area is the short term mobility of heavy metals, which depends on the pH of acidic rainwater and on the buffering effects of carbonate minerals. The buffering effects of carbonates are determined by titration (acid addition). Leaching experiments are carried out in solutions with variable initial HN03 contents for 24h. The gully-pot sediment appears to be predominantly buffered by calcite and dolomite. In case of sediment samples, which highly contain carbonates, pH decreases more slowly with increasing acidity. On the other hand, for the sediment samples, which less contain carbonate minerals, pH rapidly drops until it reaches about 2 then it decreases slowly. The leaching reactions are delayed until more acid is added to compensate for the buffering effects of carbonates. The Zn, Cu, Pb and Mn concentrations of leachate rapidly increase with decreased pH, while Cd, Co, Ni, Cr and Fe dissolutions are very slow and limited. The solubility of heavy metals depends not only on thc pH values of leachatc but also on the speciation in which metals are associated with sediment particles. In slightly to moderately acid conditions, Zn, Cd, Co, Ni and Cu dissolutions become increasingly important. As deduced from leaching runs, the relative mobility of heavy metals at pH of 5 is found to be: Zn > Cd > Co > Ni > Cu » Pb > Cr, suggesting that moderately acid rainwater leach Zn, Cd, Co, Ni and Cu from thc contaminated gully-pot sediment, while Pb and Cr would remain fixed. The buffering effects of Ca- and Mg-carbonates play an important role in delaying as well as limiting the leaching reactions of heavy metals from highly contaminated gully-pot sediment. The extent of such a secondary environmental pollution will thus depends on how well the metals in sediment can be leached by somewhat acidic rain water. Changes in the physicochemical environments may result in the severe environmental pollution of heavy metals. These results are to be taken into account in the management of contaminated sediments during rainstorms.

Oxidation Behavior of Ag-Cu-Tio Brazing Alloys (Ag-Cu-Ti 브레이징 합금의 산화거동)

  • 우지호;이동복;장희석;박상환
    • Journal of the Korean Ceramic Society
    • /
    • v.35 no.1
    • /
    • pp.55-65
    • /
    • 1998
  • The oxidation behavior of Ag-36.8a%Cu-7.4at%Ti alloy brazed on Si3N4 substrate was investigated at 400, 500 and 600$^{\circ}C$ in air. Under this experimental condition Si3N4 and Ag were not oxidized whereas Cu and Ti among the brazing alloy components were oxidizied obeying the parabolic oxidation rate law. The activation energy of oxidation was found to be 80kj/ mol which was smaller than that of pure Cu owing to the presence of oxygen active element of Ti. The outer oxide scale formed from the initial oxidation state was always composed of Cu oxides which were known to be growing by the outward diffusion of Cu ions. As the oxidation progressed the concentration gradient occurred due to the continuous consumption of Cu as Cu oxides and consequently build-up of an Ag-enriched layer below the Cu oxides resulted in the formation of multiple oxide scales composed of Cu oxide (CuO) /Ag-enriched layer/Cu oxide (Cu2O) /Ag-enriched layer. Also the inward diffusing of oxygen through Cu oxide and Ag-enriched layers led to the formation of internal oxides of TiO2.

  • PDF

Development of a dispersion coefficient method using a drone-based spatio-temporal hyperspectral image (드론기반 시공간 초분광영상을 활용한 분산계수 산정기법 개발)

  • Gwon, Yeonghwa;Han, Eunjin;Kim, Dongsu;You, Hojun;Kim, Youngdo;Kwon, Siyoone
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2021.06a
    • /
    • pp.112-113
    • /
    • 2021
  • 하천으로 유입되는 오염물질은 유수의 흐름에 따라 이송되며 혼합된다. 이러한 오염물질의 해석을 위해서는 확산 또는 분산계수 산정이 필요하다. 오염물질의 거동과 관련된 실험적 연구는 방사선 동위원소와 형광성 물질을 이용하여 수행되어 왔으나, 추적자 실험은 많은 비용 및 인력을 요하며, 고정식으로 설치한 계측장비로부터 수집한 시계열 농도자료만을 이용하여 분석하기 때문에 공간적 분포에 대한 자료 취득은 어렵다는 한계가 있다. 하천의 오염물질을 모니터링하기 위해서는 공간을 이동하는 입자의 관점에서 물리량을 표현하는 Lagrangian 방식보다 특정 위치에서 물리량 변화를 표현하는 Eulerian 방식이 적합하다. 그러나 드론을 활용한 하천원격탐사 연구의 대부분은 이동식 플랫폼으로 활용되어 특정 시간에 공간적 분광특성의 분포 파악이 한정적이며, 동일 지점에서 분광특성의 시간적 변화를 파악할 수 없다. 따라서 본 연구에서는 기존의 면단위를 측정하는 이동식 플랫폼의 한계를 극복하고 하천 모니터링에 적합한 Eulerian 방식을 적용하기 위하여 CCTV 형태의 고정식 초분광촬영 플랫폼을 도입하였다. 본 연구에서는 하천으로 유입되는 오염물질의 거동을 분석하기 위하여 자연하천에서 형광성물질인 Rhodamine WT를 이용하여 추적자 실험을 수행하였으며, 접촉식 센서를 활용한 농도측정과 동시에 드론과 초분광센서를 활용하여 CCTV 형태의 고정식 초분광영상을 획득하였다. 실험결과 도출된 전통적인 방식의 분산계수 산정과 시공간 초분광영상을 활용한 분산계수 산정을 비교하여 오염물질 거동 분석에 초분광영상 활용의 가능성을 검토하였다. 본 연구에서 제시한 드론기반 시공간 초분광영상 기법을 교량이나 기타 하천구조물에 초분광 센서를 설치하여 CCTV형식으로 활용할 경우, 공단이나 하·폐수 처리장 등의 점오염원이 밀집해 있는 지역에 직접 설치하여 화학사고의 감지 및 오염물질의 유출 확인 및 조류, 부유사 등의 다양한 수질항목의 농도 변화 감지가 가능하고, 수심변화 감지로 장기적으로 활용할 경우 특정 지점에서의 하상변동 조사가 가능하다. 또한, 오염물질의 유출 사고 발생 등의 사람이 직접 접근이 불가능한 지역에 드론을 활용하여 초분광센서를 이용한 오염물질 감지가 가능할 것으로 판단된다.

  • PDF

Measurement and Analysis of the Material Behavior of Corrugated Paperboard for Finite Element Analysis (유한요소해석을 위한 골판지 소재의 물성측정 및 분석)

  • Gyu-Yeol Kang;Duk-Geun Bae;Sun-Jong, Noh;Sim-Won Chin;Woo-Jong Kang
    • Composites Research
    • /
    • v.37 no.3
    • /
    • pp.143-149
    • /
    • 2024
  • This paper measures the mechanical properties of corrugated cardboard, an eco-friendly packaging material, and applies these measurements to the MAT_PAPER model in LS-DYNA for finite element analysis. Although MAT_PAPER is primarily designed for modeling the behavior of paper, this research demonstrates its applicability to corrugated cardboard as well. Tensile, compression, and shear behaviors of a corrugated cardboard were measured and analyzed, and based on these results, six yield surfaces were derived and integrated into the MAT_PAPER model. By comparing the finite element analysis of the material tests and the low velocity collapse analysis of the corrugated cardboard square boxes with each experimental results, it was shown that the behavior of corrugated cardboard could be equivalently considered well by the MAT_PAPER model. However, since the model is not rate-dependent, the high strain rate properties of liner materials were measured and used for strain rate correction. Consequently, this matches well with the results of the high-speed compression tests of the corrugated cardboard square boxes.

Sedimentary Facies and Geochemical Characteristics of Upper Intertidal Zone, Southwestern Coast, Korea (한반도 남서해안 상부조간대의 퇴적상 및 지구화학적 특성)

  • Kang, Suk-Bum;Koh, Young-Koo;Park, Bae-Young;Youn, Seok-Tai;Kim, Joo-Yong;Oh, Kang-Ho;Shin, Sang-Eun
    • Journal of the Korean earth science society
    • /
    • v.23 no.8
    • /
    • pp.722-735
    • /
    • 2002
  • In order to reveal sedimentary facies and geochemical characteristics on sediments distributed in upper intertidal zone, the southwestern coast of Korea, grain size and metal content analyses to the sediments were carried out. The grain size distribution of sediments shows very wide range from gravel to mud. The sediments are very well sorted to very poorly sorted and mostly positively skewed. Geochemical behavior of metals in the sediments is dependant on grain size, in part, but might be much controlled by complex submarine topography, highly varied tidal currents and surrounding land geology in the study area. Igeo (index of geoaccumulation) representing metal condensation in the sediments moderately/strongly polluted in Co and Cr and moderately polluted in Cu and Ni. But notable metal condensations are not found in the study area. So, it might be interpreted that grain size and metal content distribution tendencies in the sediments are considerably influenced by complex submarine topography, highly varied tidal currents and surrounding land geology.