• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.1
• /
• pp.96-103
• /
• 2006

This paper proposes a new technique for improving the efficiency of single phase high frequency switch mode boost converter. This converter includes an additional boost converter that follows the main hish frequency switching device. The additional converter, which is controlled at lower frequencies, bypasses almost all the current in the main switch and the high frequency switching loss is greatly reduced. Both switching devices are controlled by a simple method; each controller consists of a one-shot multivibrator, a comparator and an AND gate, and the maximum switching frequency can be limited without any clock generator. The converter works cooperatively in high efficiency and acts as though it were a conventional high frequency switch mode converter with one switching device. This paper describes the proposed converter configuration, design, and discusses the steady state performance concerning the switching loss reduction and efficiency improvement. and the proposed method is verified by computer simulation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.330-330
• /
• 2016

투명전극은 디스플레이, 터치스크린, 태양전지 등 폭넓은 분야에서 응용되고 있어 현재 각광 받는 연구 주제 중 하나이다. 특히, ITO(인듐산화물)을 이용한 투명전극은 뛰어난 효율성 때문에 가장 주목 받고 있는 전극 형태 중 하나이다. 그러나 ITO투명전극은 인듐 소재의 희소성으로 인한 자원고갈문제 및 복원력, 투명도 등에서 취약점을 지니고 있는 것으로 보고되어 있다. 이러한 ITO 투명전극의 취약점을 보완하고, 동시에 플렉서블 디스플레이(Flexible Display) 소자에 적용 가능한 대체 투명전극에 관한 연구는 현재 가장 주목할 만한 가치가 있는 연구분야로 부각되고 있다. 본 연구에서는 대체 투명전극 중 하나로 그래핀 투명전극(Graphene Transparent Electrode)을 주목했다. PEN(Polyethylene Naphthalate) 투명기판 상에 Wet-Transfer형식으로 그래핀을 전사하여 그래핀 투명전극을 구현했으며, 복원력 확인을 위해 그래핀에 2가지 (Compressive/Tensile) 압력을 가하며 구부러짐 실험(Bending Test)을 진행하며 그래핀 투명전극의 저항값을 측정했다. 일반 금속전극의 경우, 일정한 수준 이상의 압력 또는 구부러짐이 반복되는 실험의 횟수가 증가되면 원래의 복원력을 상실하며, 저항값이 상승하는 것으로 보고된바 있다. 그러나 이번 연구에서는 그래핀 투명전극을 사용해 PEN 기판 위에 투명전극을 제작한 경우, 일정한 수준의 구부러짐 반복횟수(~1,000회) 및 구부러짐 정도(~10%) 하에서 저항값이 일정하게 유지됨을 확인할 수 있었다. 별도로, 기존에 알려져 있던 순수 그래핀(Pristine Graphene)의 취약점 중 하나인 높은 저항값을 우려하여 본 연구에서는 그래핀에 도핑을 하고, 그 영향을 분석해 보았다. 그 동안 그래핀 도핑법에 대한 적지않은 연구들이 진행되었으며, 본 연구에서는 TFSA(Bis(trifluoromethanesulfonyl)amide)라는 물질을 이용한 그래핀 도핑법을 채택했다. 실험 결과, 도핑된 그래핀 투명전극은 위와 같은 수준의 그래핀 본연의 복원력을 유지하면서 저항값은 순수 그래핀 대비 약 70% 정도 낮아짐을 확인할 수 있었다. 본 연구를 통해 그래핀 투명전극이 그래핀 고유의 특성인 높은 투명도와 복원력, 도핑으로 인한 저항값 감소가능성을 확인함으로써, 그래핀 투명전극이 ITO 투명전극의 좋은 대체자가 될 수 있는 가능성을 확인할 수 있었다.

• Journal of Sensor Science and Technology
• /
• v.11 no.5
• /
• pp.263-272
• /
• 2002

In this paper, we investigate the potential for retrieval of morphometric data from three dimensional images of conducting bronchus obtained by X-ray Computerized Tomography (CT) and to explore the potential for the use of rapid prototype machine to produce physical hollow bronchus casts for mathematical modeling and experimental verification of particle deposition models. We segment the bronchus of lung by mathematical morphology method from obtained images by CT. The surface data representing volumetric bronchus data in three dimensions are converted to STL(streolithography) file and three dimensional solid model is created by using input STL file and rapid prototype machine. Two physical hollow cast models are created from the CT images of bronchial tree phantom and living human bronchus. We evaluate the usefulness of the rapid prototype model of bronchial tree by comparing diameters of the cross sectional area bronchus segments of the original CT images and the rapid prototyping-derived models imaged by X-ray CT.

• Journal of Korea Society of Industrial Information Systems
• /
• v.4 no.4
• /
• pp.1-6
• /
• 1999

When continuous media are transmitted over the communication networks, asynchrony which can not maintain temporal relationships among packets my occur due to a random transit delay. There exist two types of synchronization schemes ; for guaranteed or non-guaranteed resource networks. The former which applies a resource reservation technique maintains delay characteristics however, the latter supply a best-effort service. In this paper, I propose a intra-media synchronization scheme to transmit continuous media on general networks not guaranteeing a bounded delay time. The scheme controls transmission times of the packets by estimating next delay time with the delay distribution So, the arriving packets my be maintained within a limited delay boundary, and playout will be performed after buffering to smoothen small delay variations. To prevent network congestion and maintain minimum quality of service the transmitter performs media scaling-down by dropping the current packet when informed excessive delay from the receiver.

• Journal of the Korea Computer Graphics Society
• /
• v.4 no.1
• /
• pp.1-10
• /
• 1998

The idea of level-of-detail based on multiresolution model is gaining popularity as a natural means of handling the complexity regarding the realtime rendering of virtual environments. To generate an effective multiresolution model, we should capture the prominent visual features in the process of simplifying original complex model. In this paper, we incorporate view dependent features such as silhouette features and backface features, to the generation process of multiresolution model. To capture the view directional parameter, we propose multiresolution view sphere. View sphere maps the directional relationship between object surface and the view. Using the view sphere, coherence in the directional space is mapped into spatial coherence in the view sphere. View sphere is generated in multiresolution fashion to simplify the object. To access multiresolution view sphere efficiently, we devise quad tree for the view sphere. We also devise a mechanism for realtime simplification process using proposed view sphere. Using proposed mechanism, regenerating simplified model in realtime is effectively done in the order of number of rendered vertices.

• The KIPS Transactions:PartD
• /
• v.10D no.4
• /
• pp.661-670
• /
• 2003

Materialized views which are stored views of the database offer opportunities for significant performance gain in query valuation by providing fast access to pre-computed data. The question of when and how to use a materialized view in processing a given query is a difficult one attracting a significant amount of research. Whether a materialized view can be used in answering a query depends on the relationship between the view and the query. Proposed in this paper are new ways of utilizing materialized views in answering a query. Semantic relationships are used in addition to syntactic ones. We also utilize a materialized view in answering a query even if it has relations unrelated to the query. We first show the conditions for testing whether a materialized view can be utilized in answering a query and then present the algorithms for testing the conditions and reformulating a query with a materialized view.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.5 s.37
• /
• pp.65-76
• /
• 2005

A digital video is a very long data that requires large-capacity storage space. As such, prior to watching a long original video, video watchers want to watch a summarized version of the video. In the field of sports, in particular, highlights videos are frequently watched. In short, a highlights video allows a video watcher to determine whether the highlights video is well worth watching. This paper proposes a scheme for creating soccer video highlights using the structural features of captions in terms of time and space. Such structural features are used to extract caption frame intervals and caption keyframes. A highlights video is created through resetting shots for caption keyframes, by means of logical indexing, and through the use of the rule for creating highlights. Finally, highlights videos and video segments can be searched and browsed in a way that allows the video watcher to select his/her desired items from the browser.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.41 no.1
• /
• pp.54-63
• /
• 2014

Transposition is a unique and extreme form of ectopic eruption where a tooth develops and erupts in a position, normally occupied by an adjacent tooth. Generally, three treatment options are available when the maxillary canine and first premolar are transposed. In the first treatment option, the transposed position of the teeth can be maintained such that the first premolar is moved to the position of the canine. Second, extraction of the maxillary first premolar can be considered. Third, the position of the transposed teeth can be corrected such that their normal positions in the arch are restored. Factors that should be considered in treatment modality decision include function, occlusion, periodontal support, treatment time, patient cooperation, and esthetic demands. This report describes cases of maxillary canine-premolar transposition treated with each of the three aforementioned treatment options. In the first case, transposed teeth were arranged in their transposed position. The second case was an extraction case. In the third case, orthodontic treatment and surgical repositioning were conducted.

• Journal of Radiation Protection and Research
• /
• v.22 no.3
• /
• pp.135-141
• /
• 1997

The study of anneal characteristics is important for TL dosimeter to reuse. To obtain the annealing condition of the recently developed, new TL dosimeter, LiF:Mg,Cu,Na,Si Teflon Tills in a disk type (diameter 4.5 mm, thickness about $90mg/cm^2$), we studied for pre-irradiation annealing, readout procedure and post-readout annealing, in order. The gamma irradiations were carried out with a $^{60}Co$, dose of 0.1 Gy. We have used the method that observe the variation of thermoluminescent(TL) intensity of these Teflon TLDs over repeated cycles by changing both anneal temperature and anneal time with the TLD reader and the oven. There is a 5% loss in sensitivity over the ten repeated readouts by the annealing condition:pre-irradiation annealing at $80^{\circ}C$ for one hour, readout to $280^{\circ}C$ and post-readout annealing at $270^{\circ}C$ for 20 seconds.

• Journal of Science and Technology Studies
• /
• v.1 no.1 s.1
• /
• pp.71-103
• /
• 2001

Usually social control and acceptance of science and technology is thought to be a separate or even confronting thing. But this paper aims to go beyond this simple and dichotomous thinking. Rather, this paper argues that social control and acceptance of science and technology can be combined altogether organically. In other words, this paper argues that social control of a particular science and technology has functional effects to the acceptance of that science and technology. Social control of a particular science and technology is a signal that something is going wrong; it reallocates attention and enhances social awareness; it evaluates ongoing activity; and it alters this activity in various ways to secure a sustainable future. In order to prove this functional hypothesis, this paper tries a case study of biotechnology from a perspective of sociology of science and technology. Especially social controversies around genetically modified organisms(GMOs) and embryo cloning in Korea are analysed deeply. As a conclusion, this paper proposes some policy implications of this study.