• Journal of Climate Change Research
• /
• v.4 no.4
• /
• pp.349-358
• /
• 2013

In this study, the newest technology available to reduce GHG emissions, which can be applicable in energy industries of the future that has large reduction obligations by energy target management and large intensity of GHG emissions, has been investigated by searching the technical characteristics of each technology. The newest technology to reduce GHG emissions in the field of power generation and energy can be mainly classified into the improvement of efficiency, CCS, and gas combined-cycle technology. In order to improve the reliability of the GHG emission factor obtained from the investigation process, it has been compared to the technology-specific GHG emission factor derived from the estimated amount of emissions. Then the GHG abatement measures, using the derived estimation of factor, by using the newest technology to reduce GHG emissions have been predicted. As a result, the GHG reduction rate by technology of CCS development has been expected to be the largest more than 30%, and the abatement rate by technology of coal gasified fuel cell and pressurized fluidized-bed thermal power generation has been showed more than 20%. If the effective introduction of the newest technology and the study of its characteristics is continued, and properly applied for future GHG emissions, it can be prospected that the national GHG reduction targets can be achieved in cost-efficient way.

• Journal of Internet of Things and Convergence
• /
• v.8 no.2
• /
• pp.41-48
• /
• 2022

This study tried to empirically explore which issues related to the social service agency for public(as below SSA), that is, social perceptions were formed, by using mess media related to the SSA. This study is meaningful in that it identifies the overall social perception and trend of SSA through public opinion. In order to extract media trend data, the search used the big data analysis system, Textom, to collect data from the representative portals Naver News and Daum News. The collected texts were 1,299 in 2020 and 1,410 in 2021, for a total of 2,709. As a result of the analysis, first, the most derived words in relation to the frequency of text appearance were 'SSA', 'establishment', and 'operation'. Second, as a result of the N-gram analysis, the pairs of words directly related to the SSA 'SSA and public', 'SSA and opening', 'SSA and launch', and 'SSA and Department Director', 'SSA and Staff', 'SSA and Caregiver' etc. Third, in the results of TF-IDF analysis and word network analysis, similar to the word occurrence frequency and N-gram results, 'establishment', 'operation', 'public', 'launch', 'provided', 'opened', ' 'Holding' and 'Care' were derived. Based on the above analysis results, it was suggested to strengthen the emergency care support group, to commercialize it in detail, and to stabilize jobs.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.246-246
• /
• 2020

최근 우리나라에서 농업용수의 다원적 기능에 대한 공감대가 형성되고 작물생육에 필요한 관개용수로만 인식되던 농업용수의 개념이 농촌생활환경개선을 포함하는 다양한 지역용수로의 포괄적 개념으로 전환되고 있다. 농업용수는 식량생산 이외의 효용을 위한 다원적 기능을 가지며 농촌지역의 각종 생산활동과 생활조건의 유지개선을 위한 농업용수의 다원적 기능에 관한 관심이 증가하는 추세이다. 농업용수에서 발생하는 회귀수는 유역의 용수공급계획, 하천 유황의 예측, 관개용수 사용량 결정, 하천 건전화 방지, 수생생태계 보호 및 생물 다양성 확보 등 농업용수의 효율적 사용 및 환경생태유지를 위해 매우 중요한 역할을 하고 있다. 농업용수 회귀수량은 농업용수 중 하천으로 회귀하는 수량을 의미한다. 본류의 생태 유량 확보에 농업용수 회귀 수량이 기여하고 있으며 본류 하천의 환경 보전 기능을 하고 있다. 또한, 수생태계 보호 및 생물 다양성 확보 등 환경 생태 유지에 매우 중요한 역할을 하고 있다. 하지만 농업용수 회귀수량이 하천 수생태에 미치는 영향 분석 연구는 미흡한 실정이다. 따라서 본 연구의 목적은 대사 저수지 유역을 대상으로 농업용수 회귀 수량이 하류 하천 수생태에 미치는 영향을 정량적으로 평가하고자 한다. 본 연구에서는 회귀 수량은 관개용수량, 배수량, 침투량, 담수심 등 물수지 항목을 논물수지 모형에 적용하여 산정하였으며, 하류 하천의 생태유량 산정을 위해 대사저수지 하류에 위치한 생물측정망 자료를 통해 대표 어종을 선정하였다. PHABSIM 모형을 이용해 모의 대상 지역 특성 자료 및 인근 소하천 생물측정망 자료를 바탕으로 HSI 기반 대표 어종 서식처 환경에서 최적 생태유량을 산정하였다. 이를 통해 추정된 농업용수 회귀 수량에 따른 필요 유량이 어류 서식환경에 미치는 영향을 평가하였다. 본 연구 결과 대사저수지 하류 하천에서 농업용수 회귀수량이 차지하고 있는 기여도 큰 것으로 분석되었으며, 최적 생태유량과 비교한 결과 농업용수 회귀수량이 수생태(어류)에 미치는 영향이 큰 것으로 나타났다. 따라서 농업용수 회귀수량은 하류 하천의 하천유지수량뿐만 아니라 하천 환경생태유지에도 매우 중요한 역할을 하고 있음을 알 수 있다.

• Resources Recycling
• /
• v.32 no.1
• /
• pp.50-59
• /
• 2023

The amount of dust generated during the dissolution of scrap in an electric arc furnace is approximately 1.5% of the scrap metal input, and it is primarily collected in a bag filter. Electric arc furnace dust primarily consists of zinc and ion. The processing of zinc starts with its conversion into pellet form by the addition of a carbon-based reducing agent(coke, anthracite) and limestone (C/S control). These pellets then undergo reduction, volatilization, and re-oxidation in rotary kiln or RHF reactor to recover crude zinc oxide (60%w/w). Next, iron is discharged from the electric arc furnace dust as a solid called Fe clinker (secondary by-product of the Fe-base). Several methods are then used to treat the Fe clinker, which vary depending on the country, including landfilling and recycling (e.g., subbase course material, aggregate for concrete, Fe-source for cement manufacturing). However, landfilling has several drawbacks, including environmental pollution due to leaching, high landfill costs, and wastage of iron resources. To improve Fe recovery in the clinker, we pulverized it into optimal -sized particles and employed specific gravity and magnetic force selection methods to isolate this metal. A carbon-based reducing agent and a binding material were added to the separated coarse powder (>10㎛) to prepare briquette clinker. A small amount (1-3%w/w) of the briquette clinker was charged with the scrap in an electric arc furnace to evaluate its feasibility as an additives (carbonaceous material, heat-generating material, and Fe source).

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.24 no.2
• /
• pp.65-71
• /
• 2018

Paper packs, glass bottles, metal cans, and plastic materials are classified according to packaging material recycling groups that are Extended Producer Responsibility (EPR). In the case of waste paper pack, the compressed cartons are dissociated to separate polyethylene films and other foreign substance, and then these are washed, pulverized and dried to produce toilet paper. Glass bottle for recycling is provided to the bottle manufacturers after the process of collecting the waste glass bottle, removing the foreign substance, sorting by color, crushing, raw materializing process. Waste glass recycling technology of Korea is largely manual, except for removal of metal components and low specific gravity materials. Metal can is classified into iron and aluminum cans through an automatic sorting machine, compressed, and reproduced as iron and aluminum through a blast furnace. In the case of composite plastic material, the selected compressed product is crushed and then recycled through melt molding and refined products are produced through solid fuel manufacturing steps through emulsification and compression molding through pyrolysis. In the recycling process of paper packs, glass bottles, metal cans, and plastic materials, the influx of recycled materials and other substances interferes with the recycling process and increases the recycling cost and time. Therefore, the government needs to improve the legal system which is necessary to use materials and structure that are easy to recycle from the design stage of products or packaging materials.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.2
• /
• pp.225-231
• /
• 2020

Fresh water that can be used by a person of the total amount of water on the planet is increased because it is less than 0.01 % except underground water, ice and snow, etc. water management response need. In order to protect and efficiently utilize water resources, major countries are conducting water footprint studies that can quantitatively estimate the amount of water put into the operating phase of the resource harvesting phase, mainly agriculture. Korea has also recently developed a number of policies in order to cope with water shortages, and in the construction industry, as well as the need for basic research to support it has been emphasized. This study was constructed DB up to the raw material harvesting step, the transport step, the production stage in order to estimate the water consumption of resources to be put into the work process to target the drainage of the road. Water usage estimation method was utilized the method presented in the Water Footprint Manual and the environmental score card certification guide, unit water usage each drainage main method was calculated after estimating the water footprint considering the water character factor, indirect water and the direct water, the water consumption factor of material input to each process. Brown asphalt, rebar, remicon of the drainage material as a result of the water footprint calculation accounted for 97 % of the total. Drainage method is a culvert, a side channel, a culvert wing wall, reinforced concrete open channel accounted for 92.2 % of the total. Drainage total step-by-step calculated water consumption and water footprint was found in order of raw material harvesting step, transport stage, production stage. Water footprint each drainage method or total drainage material calculated in this study can be used as a base data in the agricultural and construction sectors. In order to increase the reliability of the analysis, it is believed that further overseas databases will be needed for continuous review and research.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.12
• /
• pp.1837-1847
• /
• 2008

The goal of this study is to express the image of chameleons-that change their colors by light, temperature and its mood-into the sexy styles of corresponding coquettish temperamental people in Wearable Art. The method used in this study was experimenting various production mediums, including creating the textured stretch fabric, in the process of expressing the conceptual characteristics of the chameleon in Wearable Art. The concept of the work was a concoction of 'tempting', 'splendid', 'brilliant', 'fascinating', etc. that highlighted the real disposition of the chameleon. The futuristic preference of the researcher was also implicated. "Comfortable" and "enjoyable" concepts via motions were improved with the its completeness. The point of the design and production is to express symbolically the chameleon in real life, analyzing its sleek body lines, conditional colors changing, outer skins and the cubic textures. The coquettish temperamental image, the conceptual image of the chameleon, was also expressed by implication into the whole work. The entire line of this work is body-conscious silhouette. It was symbolically selected to image the outline of the chameleon that has the slim and sleek body. The exposed back is intended to express symbolically the projected back bones of the chameleon. The hood of gentle triangle line expresses the smooth-lined head part. The irregular hemlines represent the elongated chameleon's tale. The chameleon with its colors of vivid tones is characterized the colors changing by its conditions. This point was importantly treated in the working process by trying the effects that the colors are seen slightly different according to the light and angles. The material was given the effect that its surface colors are seen different in lights and angles because of the wrinkles protruded lumpy-bumpy. The various stones of red and blue tones are very similar to the skin tones of the real chameleon, and their gradation makes the effect that the colors are visibly changed with each move. The textures of the chameleon were produced via the wrinkle effect of smoke-shape, which is the result of using the elastic threads on the basic mediums stitched with 50/50 chiffon and polyester along with velvet dot patterns. The stretching fabric by the impact of the elastic threads is as much suitable for making the body-conscious line. The stones are composed of acrylic cabochon and gemstone. They are symbolically expressed the lumpy and bumpy back skin of the chameleon and produced the effect of the colors visibly different. The primary technique used in this dress is the draping utilizing the biased grains. The front body piece is connected to the hood and joined to the back piece without any seam. For the irregular hemline flares, leaving the several rectangular pieces with bias grains, they were connected by interlocking. What defines the clothes is the person in action. Therefore, what decides the completeness of clothes might be its comfortable and enjoyable feeling by living and acting people. The chameleon dress could also reach its goal of comforting and pleasing Wearable Art in the process of studying the techniques and effects that visibly differentiate the colors. It is considered as a main point of the Wearable Art, which is a comfortable enjoyable clothing tempered with the artistic beauty.