• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2471-2473
• /
• 2004

원격조작시템은 일반적으로 주로봇, 종로봇과 이들을 연결하는 통신채널로 구성되는데, 통신채널에는 반드시 시간 지연이 존재하고 이는 전체 시스템을 불안정하게 만드는 가장 큰 요인으로 알려져 있다. 시간지연으로 인한 불안정성 문제를 해결하기 위한 연구가 활발히 진행되어 왔는데, 최근에는 웨이브변수를 적용한 원격조작시스템이 많이 사용되고 있다. 웨이브변수를 적용하면 통신채널에 시간지연이 존재하더라도 수동성 관점에서 안정성을 보장할 수 있고, 다른 제어방법에 비하여 구조가 간단하기 때문에 구현하기가, 용이한 장점이 있으나, 특성 임피던스에 따른 성능 변화를 해석한 연구는 없었다. 따라서, 본 논문에서는 웨이브변수를 도입한 원격조작시스템에 대하여 특성 임피던스에 따른 성능을 투명성의 관점에서 해석하고자 한다. 또한, 시간 지연이 존재하는 원격조작시스템에 웨이브 변수를 적용한 실험을 통하여 시간지연 시스템에 대한 웨이브 변수의 강인성을 보이고자 한다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1101-1104
• /
• 2003

In this paper, we performed the study on the operation characteristics of tele-grasping using the developed experimental system. The experimental system consists of master and slave gripper. and signal processing system. For the stable grasping of an object, this system feedback the normal force obtained from the straingage of the slave gripper to magnetic particle brake of the master gripper through the signal processing system. This experimental system can control the grasping force in remote using the force feedback device. Some experimental results of the-tele-grasping are presented and discussed

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.37 no.5
• /
• pp.22-33
• /
• 2000

Since the heavy-duty power manipulator generally has high ratio gear reducers at its joints, its dynamic characteristics is much slower than that of the master manipulator and it is likely to encounter the saturation in the input magnitude when it is used as the slave manipulator in telemanipulation systems. This paper proposes a force reflecting and compliant control scheme for the heavy-duty power telemanipulator. The main advantage of the proposed scheme is that it provides a precise position and compliant control performance for a telemanipulator with control input saturation. The stability of the proposed scheme is analyzed and a series of experiments shows its performance.

• The Journal of the Korea Contents Association
• /
• v.18 no.7
• /
• pp.322-329
• /
• 2018

Teleoperation is defined with a master device that gives control command and a slave robot in a remote site. In this field, it is common that a human operator executes and experiences teleoperation with a virtual slave, and preliminary learns dynamic characteristic and network environment from both agents. Generally, a virtual slave has neglected forward dynamics and its kinematic model has been implemented in computer graphics. This makes a operator to experience actual feelings. This paper proposes a dynamic teleoperation model in which a robotic forward model is applied. Also, a novel compensation method is proposed to reduce the numerical error problems in forward dynamics caused by low control sampling rate. Finally, its results will be compared to the teleoperation in an actual environment.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.36 no.3
• /
• pp.157-165
• /
• 2000

A small hydraulic winch system with an automatic tension control unit was designed to improve the work efficiency of coastal small vessels and the dynamic response characteristics of the winch system operated in the open loop condition was investigated. The inlet and the outlet pressures in hydraulic motor, the torque and the rotating speed of winch drum were measured as a function of time, and the behaviour in autotension mode for stepped load changes was analyzed. The results obtained are summarized as follows : 1. The developed winch system for coastal small vessels will result in better fishing with improved efficiency and lower manpower consumption by remote control of winch system. 2. The rotating delay times of winch drum for on/off operations of solenoid valve were 0.09 see at CW mode and 0.04 sec at CCW mode, respectively. After the solenoid valve was controlled, response characteristics were unstable slightly but showed good tracking behaviour over short time. 3. The driving torque of winch system in autotension mode was kept almost constant of 55.9 kgf·m, and 11.1 then the rotating speed of winch drum was kept almost constant of 5.1 rpm in the larger torque than 55.9 kgf·m and 11.1 rpm in the lower torque than that. 4. The 5% settling times in the transient response characteristics of autotension mode under rapid increasing and decreasing conditions of load were 0.12 sec and 0.2 sec, respectively, and then the rotating speeds were 11 rpm and 5.3 rpm, respectively. 5. The tracking behaviour of torque and rotating speed by remote control operation were stable within 0.23 sec at CW mode and 0.37 sec at CCW mode, respectively.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1285-1287
• /
• 2004

본 논문은 20kV 10kW급 고전압 직류 전원장치와 원격제어기의 개발에 대해서 기술하고 있다. 개발된 고전압 직류 전원장치는 다양한 고전압 시스템에 적용하기 위해서 출력전압이 최대 20kV까지 가변 가능하도록 설계되었으며 먼저, 펄스파워 시스템에 필요한 고전압 캐패시터 충전용 전원장치로서 사용하여 동작특성과 신뢰성을 확인하였다. 고전압 직류 전원장치는 단상 고주파 공진형 인버터 방식을 채용하였으며 스위칭 주파수를 최대 100kHz까지 가변시켜 출력전류를 제어하였다. 또한 인버터 출력이 인가되는 고전압 변압기에 2대의 단상 변압기를 사용하여 각각의 출력부담과 전기적 절연내력을 낮출 수 있었다. 한편, 고전압 시스템에 적용 할 때, 조작자의 안전성을 높이고 동작상태를 실시간으로 진단하기 위해서 원격제어기를 개발하였으며 다양한 조건에서의 시뮬레이션과 실험을 통해 개발된 고전압 전원장치와 원격제어기의 동작특성을 확인하였다

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.2
• /
• pp.17-23
• /
• 1999

This paper is to present a selected method of circuit parameters in the inverter part of the electronic dimming ballast fer fluorescent lamps, that is adffIuate to use with the prevailing dimming controller IC. Through the experirrent result using the prototype of the electronic dimming ballast rroduced by this rrethod, its validity is verified from the electrical and light outplt characteristics on fluorescent lamps. Also, it is feasible to rerrnte automatic and passive control for dimming electronic ballast as using a micrqrocessor, and we easily recognize the lamp condition owing to rmke a program indicate abnormal behavior for fluorescent lamp at PC screen.screen.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.37 no.3
• /
• pp.163-173
• /
• 2001

The dynamic behavior characteristics of a small fishing crane for inshore and coastal fishing vessels was experimentally analyzed in order to improve the fishing operation and to reduce considerably manual work of fisherman. The small fishing crane was designed to be controlled electro-hydraulically by means of proportional valves and solenoid valves, and also to be controlled the speed of each operation. The dynamic behavior characteristics was investigated by measuring the changes of parameters such as oil pressure, swing angle of load, load tension, the lifting angle and the swing angle of crane arm when the arms extended in a side way was given a test load. The results obtained are summarized as follows: 1. The designed small fishing crane can be proportionally controlled by means of proportional valves and rapidly by operating the solenoid valves, respectively. The capacity, turning angle, maximum reach of crane were 2 T-M, $180^\circ$, 3.7m, respectively. 2. The vertical change of crane arm on the extension of lifting cylinder was $1.2^\circ$/cm, and the swing speed of crane arm due to the extension of swing cylinder by on/off operations of solenoid valves was $15^\circ$/sec, with the swing period of 1.4 sec and the angle fluctuation of $\pm$11.0$^{\circ}$. 3. When changing simultaneously the horizontal and vertical positions of the lifting load by on/off operations of solenoid valves, the swing and lifting speeds of crane arm were $4.46^\circ$/sec and $6.4^\circ$/sec, respectively. 4. The movements of the designed crane were particularly smooth as they are controlled with the aid of proportional valves than by means of solenoid valves.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.1019-1024
• /
• 2006

각종 온라인 문화가 발달하는 가운데 원거리에서 의사 소통을 가능하게 하는 도구에 관한 관심도 커지게 되었다. 이러한 도구 중에서 2 차원 그림 저작을 지원하는 도구에 기인하여, 본 논문에서는 3 차원 모델을 만들어 내고 조작함으로써 원거리의 사용자와 의사 소통할 수 있는 시스템을 제안한다. 실시간에 수행되는 시스템의 특성상, 3 차원 모델링은 간편하고 직관적으로 수행될 수 있도록 하며, 병행 수행 제어를 고려하여 구현한다. 본 시스템에서의 모델링은 주어진 primitive를 이용하거나 사전에 제작된 mesh를 불러오는 것으로 수행할 수 있으며, 사용자가 직접 그려주는 간략한 외곽선 스케치를 기반으로 하여 3 차원 모델을 생성할 수도 있다. 본 시스템에서 모델의 생성, 제어 등의 모든 연산은 다양한 병행 수행 제어 전략을 이용하여 실시간에 수행된다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.10c
• /
• pp.272-274
• /
• 2000

본 논문에서는 자율 주행 로봇을 위한 계층화된 소프트웨어 구조 제안한다. 제안된 소프트웨어 구조에서는 데이터 종류를 추상화 단계에 따라 수치형 데이터, 명제형 데이터, 사실형 데이터로 분류했다. 그리고, 사용하는 데이터의 종류에 따라 계층을 분류해서, 실행 계층, 제어 계층, 추론 계층을 구성하고 각 계층의 기능을 정의했다. 또한 각 계층별 데이터 특성에 따른 고유의 데이터 처리 방법을 적용하였으며, 처리 결과에 대한 계층간 연동 구조에 대해서도 제안한다. 이러한 계층의 명확한 구분을 통하여 실시간 문제이면서도 복잡한 자료 처리 구조를 가지는 자율 주행 로봇의 소프트웨어 구조를 체계화하였고, 각 계층별 소프트웨어를 콤포넌화하여 재 사용성을 높이게 되었다.