• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.9
• /
• pp.802-810
• /
• 2012

This paper describes RFID(Radio Frequency Identification) based target acquisition and docking system. RFID is non-contact identification system, which can send relatively large amount of information using RF signal. Robot employing RFID reader can identify neighboring tag attached objects without any other sensing or supporting systems such as vision sensor. However, the current RFID does not provide spatial information of the identified object, the target docking problem remains in order to execute a task in a real environment. For the problem, the direction sensing RFID reader is developed using a dual-directional antenna. The dual-directional antenna is an antenna set, which is composed of perpendicularly positioned two identical directional antennas. By comparing the received signal strength in each antenna, the robot can know the DOA (Direction of Arrival) of transmitted RF signal. In practice, the DOA estimation poses a significant technical challenge, since the RF signal is easily distorted by the surrounded environmental conditions. Therefore, the robot loses its way to the target in an electromagnetically disturbed environment. For the problem, the g-filter based error correction algorithm is developed in this paper. The algorithm reduces the error using the difference of variances between current estimated and the previously filtered directions. The simulation and experiment results clearly demonstrate that the robot equipped with the developed system can successfully dock to a target tag in obstacles-cluttered environment.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.6
• /
• pp.91-100
• /
• 2012

Wireless monitoring system for the structural health evaluation has a limit to the reliability of measured response. The objective of this study is to evaluate an effective measurement range of the wireless monitoring system on the analyzed data. For the wireless monitoring system, Bluetooth and Wi-Fi are applied to datalogger-receiver and receiver-personal computer, respectively. For the model of the monopile structure response, a laboratory-scale monopile is manufactured with Mono Cast Nylon and a lateral loading is applied by hammer impacting. Strain gauges attached on the model monopile are connected with the datalogger. The distances of datalogger-receiver and receiver-personal computer are changed for the evaluation of the measurement range. Experimental results show that the receiving rates of the response remain almost constant within limited distance, while the receiving rates dramatically decrease out of effective range. In addition, the receiving rates affect on the measured natural frequencies of the model monopile. This study suggests that the effective range evaluation of the wireless monitoring system may be used for the determination of a monitoring distance to the monopile installed in the offshore wind farm.

• The Journal of Engineering Geology
• /
• v.15 no.2 s.42
• /
• pp.201-212
• /
• 2005

A photogrammetric camera system and a software have been built for capturing planned stereo images. To evaluate the system,25 planar data from a constructed rock slope were measured using both geological compass and photo system. Comparison of the data groups from both system showed matching relationship that falls within the error range of $5.25\pm4.53$ in strike and $3.18\pm3.17$ in dip angles, when the 2 standard deviation error distributions were considered. To evaluate the errors of the Photo matching and non planarity of the surface, orientations of the same plane were repeatedly measured 20times. These measurements showed error ranges of $8.2\pm3.4$in strike and $6.6\pm3.4$ in dip angle, considering the same error distributions. Measured strikes and dips were compared with the corresponding compass measurements in 5 constructed. slopes to test the system. Stereonet plots showed that the photo system measured data coincided well with the compass measurements. With these evaluations, the photo system can measure the planar structure in inaccessible locations with reliable accuracy at the same time reducing the data gathering period therefore resulting to an efficient geological survey.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.3 s.309
• /
• pp.41-50
• /
• 2006

This paper presents a novel ultrasonic sensor system to overcome limited distance detection range that can be measured only more than 30cm by single ultrasonic transducer. This is accomplished by separation of receiving capacitive ultrasonic transducer from transmitting capacitive ultrasonic transducer. And hardwares and software of the system are described in detail. The system makes very close range as well as long range detect by wireless precisely. Frequency of trigger pulse is 10Hz, but it is very low frequency for transmitting data in wireless module. Therefore, for triggering between receiver and transmitter, an algorithm for mixing and distinguishing trigger pulse from carrier pulse by software is proposed. The system is designed by common microprocessor 8051. The performance of the proposed method has been assessed through two types. The first, transmitting and receiving transducer are put on both sides. And then, distance of two point is measured as far as 0mm. Secondly, transmitting transducer send out ultrasonic pulse and measure the time of flight(TOF) until a first echo from an object detected by the detached receiving transducer. The distance between the detached transducers and a reflecting object is measured as far as 7cm. Images of measured ultrasonic waves and TOF for two methods presented to prove effectiveness of results.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2017.01a
• /
• pp.191-192
• /
• 2017

해상에서는 도로가 아닌 해상 위라는 환경 때문에 음주단속을 실시하여 음주운항을 예방하기엔 어려움이 존재한다. 원거리로 신체정보를 보낼 수 있는 음성을 통하여 음주단속을 한다면 거리가 얼마나 떨어져 있더라도 실시간으로 측정이 가능하다. VTS 무선 교신 환경을 이용하여 음성을 통신할 때도 무선 환경이 고르지 못할 경우에 클리핑이 일어나 음주가능성 판단율이 저하될 수 있다. 따라서 본 논문에서는 음성신호가 왜곡이 되어 음주 가능성 여부의 판단율 오차를 줄이기 위해 신호를 보상하는 방법을 제안하였다.

• Electronics and Telecommunications Trends
• /
• v.27 no.6
• /
• pp.134-143
• /
• 2012

지구과학 및 우주 탐사를 목적으로 지속적으로 발전해 온 라이다 센서 기술은 현재 항공기 및 위성에 탑재되어 정밀한 지구 지형 및 환경 관측을 위한 주요 수단으로 사용되고 있으며, 우주 정거장과 우주선의 도킹 시스템, 우주 탐사 로봇에 활용되고 있다. 지상에서는 원거리 거리 측정, 자동차 속도 위반 단속 등을 위한 간단한 형태의 라이다 센서를 비롯하여 최근에는 3차원 영상 복원을 위한 레이저 스캐너, 미래 무인자동차를 위한 3차원 영상 센서의 핵심 기술로 활용되면서 그 활용성과 중요성이 점차 증가되고 있다. 본고에서는 라이다 센서의 기본 원리 및 종류, 최근 영상 라이다 센서 기술동향, 응용 분야의 몇 가지 예를 요약하여 소개함으로써, 국내 기반 기술 및 상용화 개발이 취약한 라이다 센서에 대한 이해를 돕고자 한다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.185.1-185.1
• /
• 2010

원격탐사(remote sensing)란 관측 대상과의 접촉 없이 멀리서 정보를 얻어내는 기술을 말한다. 기상관측분야에는 이미 소다(SODAR) 장비가 폭넓게 사용되거 왔으나 최근 풍력자원평가(wind resource assessment)를 위한 풍황측정에 SODAR와 더불어 라이다(LIDAR)가 적극적으로 활용되기 시작하고 있다. 참고로 SODAR(SOnic Detection And Ranging)는 수직 및 동서 남북 방향으로 음파를 발생시키고 대기유동에 의해 산란 반사된 에코를 수신하여 진동수 변화와 반사에코 강도를 측정하여 각 방향의 에코자료를 벡터 합성함으로써 풍향 및 풍속을 산출하는 원리이다. 반면 LIDAR(Light Detection And Ranging)는 비교적 최근에 풍황측정 용도로 개발된 레이저 탐지에 바탕을 둔 원거리 센서로, 공기입자(먼지, 수증기, 구름, 안개, 오염물질 등)에 의해 산란된 레이저 발산의 도플러 쉬프트(Doppler shift)를 이용하여 풍향 및 풍속을 측정하는 원격탐사 장비이다. 풍력자원평가 측면에서 라이다는 그 정확도가 IEC61400-12에 의거한 풍황탑(met-mast) 측정자료 다수와의 비교검증 실측평가(Albers et al., 2009)를 통하여 입증된 바 있다. 한편 한국에너지기술연구원에서 운용 중인 라이다 시스템은 그림 1의 우측 그림과 같이 1초에 $360^{\circ}$를 스캔하여 50지점에서 반사되는 레이저를 스펙트럼으로 측정하되 설정된 관측높이에서 풍속은 샘플링 부피(sampling volume)의 평균값으로 정의된다. 그런데 샘플링 부피는 설정된 관측높이로부터 상하 12.5m, 총 25m의 높이구간에서 관측한 스펙트럼의 평균값을 그 중앙지점에서의 풍속으로 환산하는 알고리듬(algorithm)을 채택하고 있다. 따라서 비선형적으로 변화하는 풍속연직분포 관측 시 풍속환산 알고리듬에 의한 측정오차가 개입될 가능성이 존재하는 것이다. 이에 본 연구에서는 라이다에 의한 풍속연직분포 측정 시 샘플링 부피의 구간 평균화 과정에서 발생하는 불확도(uncertainty)를 정량적으로 분석함으로써 라이다에 의한 풍속연직분포 관측의 불확도를 정량평가하고자 한다.

• Journal of Radiation Protection and Research
• /
• v.39 no.3
• /
• pp.150-158
• /
• 2014

Radiation-related practitioners and radiation-treated patients at medical institutions are inevitably exposed to radiation for diagnosis and treatment. Although standards for maximum doses are recommended by the International Commission on Radiological Protection (ICPR) and the International Atomic Energy Agency (IAEA), more direct and available measurement and analytical methods are necessary for optimal exposure management for potential exposure subjects such as practitioners and patients. Thus, in this study we developed a system for real-time radiation monitoring at a distance that works with existing portable device. The monitoring system comprises three parts for detection, imaging, and transmission. For miniaturization of the detection part, a scintillation detector was designed based on a silicon photomultiplier (SiPM). The imaging part uses a wireless charge-coupled device (CCD) camera module along with the detection part to transmit a radiation image and measured data through the transmission part using a Bluetooth-enabled portable device. To evaluate the performance of the developed system, diagnostic X-ray generators and sources of $^{137}Cs$, $^{22}Na$, $^{60}Co$, $^{204}Tl$, and $^{90}Sr$ were used. We checked the results for reactivity to gamma, beta, and X-ray radiation and determined that the error range in the response linearity is less than 3% with regard to radiation strength and in the detection accuracy evaluation with regard to measured distance using MCNPX Code. We hope that the results of this study will contribute to cost savings for radiation detection system configuration and to individual exposure management.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.9
• /
• pp.1035-1042
• /
• 2014

Object recognition is one of the key technologies of the monitoring system for the prevention of various intelligent crimes. The height is one of the physical information of a person, and it may be important information for identification of the person. In this paper, a method which can detect pedestrians from CCTV images and estimate the height of the detected objects, is proposed. In this method, GMM (Gaussian Mixture Model) method was used to separate the moving object from the background and the pedestrian was detected using the conditions such as the width-height ratio and the size of the candidate objects. The proposed method was applied to the CCTV video, and the height of the pedestrian at far-distance, middle- distance, near-distance was estimated for the same person, and the accuracy was evaluated. Experimental results showed that the proposed method can estimate the height of the pedestrian as the accuracy of 97% for the short-range, 98% for the medium-range, and more than 97% for the far-range. The image sizes for the same pedestrian are different as the position of him in the image, it is shown that the proposed algorithm can estimate the height of pedestrian for various position effectively.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.7
• /
• pp.83-90
• /
• 2004

This paper describes on-board decentralized data acquisition system that acquires and encodes the numerous sensor data distributed on the big flight vehicles efficiently. The system's sub-units which have one encoder unit and several remote units were designed and simulated according to the communication protocols and the control, sequence logics based on the FPGA chip. And we have made the functional verification of the acquisition, collection and formatting of remote analog and digital data for the manufactured hardwares.