• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2017.11a
• /
• pp.232-233
• /
• 2017

In this research, tunnel stern was applied on the asymmetric high-speed catamaran to evaluate vessel's hydrodynamic performance by numerical method, and the tunnel stern types are distinguished by angle of inclination of tunnel exit region into 3cases ($0^{\circ}$, $3^{\circ}$ and $6^{\circ}$). Consequently, it is confirmed that the total resistances of tunnel stern which have $0^{\circ}$ of inclination are lower about 4.8-17.9% than the bare hull in the wide speed range, but those of $3^{\circ}$ and $6^{\circ}$ of inclination tunnel stern are higher than bare hull about 5-14% and 5-29%, respectively. On the other hand, trim angles of $0^{\circ}$ of inclination tunnel stern show similar trend with those of bare hull in whole ranges of FnV but those of $3^{\circ}$ and $6^{\circ}$ of inclination tunnel stern are stabilized and declined respectively after FnV=1.54. These phenomena indicated that increasing angle of inclination of tunnel exit region had negative influence on resistance performance, however, it could make vessel's operation performance better than bare hull.

• Journal of Navigation and Port Research
• /
• v.43 no.1
• /
• pp.9-15
• /
• 2019

Mooring bollards are the mandatory facility in ports for they are the objects used to fasten the ship to its position at the berth. All the mooring bollards were installed following suggested sizes, numbers, materials and shape of installation according to Port and Fishing Design Standards. However, Korea has no management standard for use of mooring bollards to safety in ship berthing. In this research, the installation standard for mooring bollards including the holding power applied to mooring bollards in berthing was studied. Also, the performance of mooring bollards for minimum safety guarantee in berthing based on research of various specification by their sizes was analyzed. The analysis on mooring bollards was examined by each power on mooring bollards from the applied force in berthing divided into horizontal and vertical direction in order to examine the performance of domestic mooring bollards, the limit force is calculated based on detailed specification research result. As a result, the working stress according to the towing force was found to be at least 150Mpa and it was evaluated to be 60% of the limit strength. Also, by comparing each forces, the appropriateness was examined and the specification of maximum capability calculated. This performance evaluation method based on detail specification of mooring bollards will be expected to be useful to examine the appropriateness of mooring bollards for various types of vessel in berthing and to develop maintenance and management standard through the performance change evaluation referring to mooring bollard detailed specification changes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.3
• /
• pp.327-333
• /
• 2013

In this paper, we propose a QoS information collection method at the information server in maritime networks with multi-network interfaces, and a route selection scheme based of the measured predictive QoS information comparing with parameters requested from a mobile node in a ship entering into a harbor from near-shore area. By changing network conditions and applying various application bandwidths, we check the operation of our proposed scheme and measure its performance of the original and proposed schemes in the viewpoints of the received packet traffic and end-to-end delays.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.10
• /
• pp.104-110
• /
• 2005

In this paper, unmanned vehicle system and VFF algorithm development with vehicle dynamics is the main topic as a part of Intelligent Transportation System. Unmanned vehicle system is classified by vehicle system and control system. Authors used RC servo motor for longitudinal control via throttle angle, shift lever control, and brake control. For lateral control, authors used step motor, equipped with reduction gear. Unmanned vehicle has nine ultrasonic sensors in front of the unmanned vehicle. After the microcontroller computes the distance between unmanned vehicle and obstacle, the control computer calculates the steering angle enough to avoid the obstacle.

• Journal of the Society of Naval Architects of Korea
• /
• v.35 no.2
• /
• pp.1-7
• /
• 1998

Hull form development of the medium size high speed fishery patrol ship was carried out in the CWC at Chosun university. Same size of 15 knots class fishery patrol ship was selected as a parent form(Model number : CU-015), and modified fore and after body hull form under the slightly lengthened lo be suitable for the operation at 20 knots. To minimize the breaking wave in the vicinity of fore body at high speed zone, high bulb and sharp entrance angle were adapted. Meanwhile, to enlarge the engine room space keeping high resistance and sea-keeping Performance, U-type stern hull form was developed. Although the hull form was highly constrained in being limited to modification of a parent hull form significant wave resistance improvement was made.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.4
• /
• pp.359-364
• /
• 2013

In this paper, we propose a direct sequence ultra wideband (DS-UWB) radar system based on correlation accumulation in the fields of the ship traffic control and the safe ship operation including docking guidance systems. The proposed DS-UWB radar system averages out the noise by accumulating correlator outputs, and thus, provides a reliable distance estimation performance with a shorter estimation time compared with conventional DS-UWB radar systems. From numerical results, it is confirmed that the proposed DS-UWB radar system has not only a shorter average correlation processing time, but also a better distance estimation performance.

• Journal of Advanced Navigation Technology
• /
• v.15 no.1
• /
• pp.18-24
• /
• 2011

This paper proposes fault diagnosis system which is able to diagnose the fault from present operating condition by analyzing monitored signals with present ship monitoring system without additional sensors. For this all kinds of ship's engine room monitored data are classified with combustion subsystem, heat exchange subsystem and electric motor and pump subsystem by analyzing ship's operation data. To extract dynamic characteristics of these subsystems, log book data of container ship of H shipping company are used.

• Journal of Navigation and Port Research
• /
• v.32 no.8
• /
• pp.583-588
• /
• 2008

The planing craft is designed specifically to achieve comparatively high speed on the surface of the water. In general, the stepped hull craft has effect improvement in speed and fuel-efficiency because of the reduction of total resistance by a small wetted surface area without corresponding stepped hull craft. In this paper, the high speed stepped hull crafts with respect to the number of bottom steps were performed to compare the effect of resistance performance using at-sea model-test method. In conclusion, the stepped hull craft with twin-step was proved to be effective to reduce the total resistance.

• Journal of Advanced Navigation Technology
• /
• v.21 no.3
• /
• pp.243-250
• /
• 2017

GPS(Global Positioning System) signal structure uses spread spectrum and the received power is relatively lower than the receiver noise figure. Therefore, it is vulnerable to the RF interferences and it could restrict on the safety navigation. The objective of this paper is to research on the spectral domain GPS interference rejection algorithm using proposed K-median filtering threshold setting method. In the performance test, the proposed algorithm has a relatively higher ISR(interference to signal ratio) compared with the conventional temporal domain technique in case of time variant interference signals.

• Journal of Navigation and Port Research
• /
• v.31 no.5 s.121
• /
• pp.333-338
• /
• 2007

In this paper, we have studied the ship collision avoidance support on the basis of 'Ship Collision Avoidance Model considered a Speed' for the purpose of the decrease of the human error, caused ship collisions, at sea and the effective support of avoiding ship collisions. The program has been reflected the speed of a target ship, had not been considered in a preceding study. Besides, the program will effectively support a maneuver for a collision avoidance, through the display of a feasible area and the method of a collision avoidance using the own ship's turning characteristic about the action of target ship's course and velocity.