• Journal of the Korean Electrochemical Society
• /
• v.27 no.1
• /
• pp.32-39
• /
• 2024

The key components of a Phosphoric acid fuel cell (PAFC) are an electrode catalyst, an electrolyte matrix and a gas diffusion layer (GDL). In this study, we introduced a microporous layer on the GDL of PAFC to enhance liquid electrolyte management and overall electrochemical performance of PAFC. MPL is primarily used in polymer electrolyte membrane fuel cells to serve as an intermediate buffer layer, effectively managing water within the electrode and reducing contact resistance. In this study, electrodes were fabricated using GDLs with and without MPL to examine the influence of MPL on the performance of PAFC. Internal resistance and polarization curves of the unit cell were measured and compared to each other to assess the impact of MPL on PAFC electrode performance. As the results, the application of MPL improved power density from 170.2 to 192.1 mW/cm². MPL effectively managed electrolyte and water within the matrix and electrode, enhancing stability. Furthermore, the application of MPL reduced internal resistance in the electrode, resulting in sustained and stable performance even during long-term operation.

• Information Systems Review
• /
• v.18 no.4
• /
• pp.141-154
• /
• 2016

Mobile application is growing explosively with the advent of a new technology: smartphones. Mobile application is a new marketing channel and performs as a start-up platform. This study examines the effect of mobile application on the off-line market. Despite the continuous declining demand for taxi service, paradoxically, the supply of taxi service has increased. The taxi industry can be categorized into general taxi and call taxi. General taxi is accidental and inefficient because it has to search for its own passenger. As call taxi takes the request of a passenger, it is more efficient than general taxi. However, the current defective passenger-taxi driver matching system and insufficient taxi driver management hinder the development of the call taxi market. Differences in differences (DID) is an econometrical methodology that examines whether or not an event has meaningful influence. This research uses DID to investigate the effect of the Kakao taxi application on the call taxi industry. Furthermore, it examines the effect of major companies' reckless diversification, which is considered unethical behavior. The passengers of call taxi data from August 2014 to July 2015 and those of designated driving service data of the same period were collected as the control group.

• Journal of the Society of Disaster Information
• /
• v.20 no.1
• /
• pp.156-168
• /
• 2024

Purpose: The trend of highway traffic accidents shows a repeating pattern of increase and decrease, with the fatality rate being highest on highways among all road types. Therefore, there is a need to establish improvement measures that reflect the situation within the country. Method: We conducted accident severity analysis using Random Forest on data from accidents occurring on 10 specific routes with high accident rates among national highways from 2019 to 2021. Factors influencing accident severity were identified. Result: The analysis, conducted using the SHAP package to determine the top 10 variable importance, revealed that among highway traffic accidents, the variables with a significant impact on accident severity are the age of the perpetrator being between 20 and less than 39 years, the time period being daytime (06:00-18:00), occurrence on weekends (Sat-Sun), seasons being summer and winter, violation of traffic regulations (failure to comply with safe driving), road type being a tunnel, geometric structure having a high number of lanes and a high speed limit. We identified a total of 10 independent variables that showed a positive correlation with highway traffic accident severity. Conclusion: As accidents on highways occur due to the complex interaction of various factors, predicting accidents poses significant challenges. However, utilizing the results obtained from this study, there is a need for in-depth analysis of the factors influencing the severity of highway traffic accidents. Efforts should be made to establish efficient and rational response measures based on the findings of this research.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.18 no.2
• /
• pp.45-54
• /
• 2010

Field study was conducted for 5 months to investigate the effect of leachate recirculation on aerobic landfill stabilization at active landfilling site. The area of field experiment was $24{\times}24m$ and 9 vertical air injection wells with screen ranging 3~9 m were installed. Aerobic landfill operation for 5 months increased average internal landfill temperature to $70^{\circ}C$ and 8 % of landfill height was settled down. $94m^3$ of leachate was recirculated for 1 month to increase moisture content of landfill to favor microbial degradation of organic matter, which resulted in temporary increase of groundwater level and anaerobic environment. But leachate recirculation triggered increase of internal landfill temperature of neighboring monitoring well. Because excessive leachate recirculation decreased internal landfill temperature by cooling effect, internal landfill temperature should be checked to avoid abrupt decrease of temperature during leachate recirculation. Also, to prevent anaerobic environment, intermittent leachate recirculation was recommended.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.7
• /
• pp.387-395
• /
• 2015

Anaerobic mesophilic batch test of several organic wastes were carried out by a graphical statistic analysis (GSA) to evaluate their ultimate biodegradability and two distinctive decay rates ($k_1$ and $k_2$) with their corresponding degradable substrate fractions ($S_1$ and $S_2$). Each 3 L batch reactor was operated for more than 100 days at the substrate to inoculum ratio (S/I) of 0.5 as an initial total volatile solids (TVS) mass basis. Their Ultimate biodegradabilities were obtained respectively as follow; 69% swine waste, 45% dairy cow manure, 66% slaughterhouse waste, 79% food waste, 87% food waste leachate, 68% primary sludge and 39% waste activated sludge. The readily biodegradable fraction of 89% ($S_1$) of Swine Waste BVS ($S_o$) degraded with in the initial 31 days with $k_1$ of $0.116day^{-1}$, where as the rest 11% slowly biodegradable fraction ($S_2$) of BVS degraded for more than 100 days with the long term batch reaction rates ($k_2$) of $0.004day^{-1}$. For the Food Waste and Waste Activated Sludge, their readily biodegradable portions ($S_1$) appeared 89% and 80%, which degrades with $k_1$ of $0.195day^{-1}$ and $0.054day^{-1}$ for an initial 15 days and 28 days, respectively. Their corresponding long term batch reaction rates ($k_2$) were $0.003day^{-1}$ and $0.002day^{-1}$. Results from other organic wastes are addressed in this paper. The theoretical hydraulic retention times (HRTs) of anaerobic digesters treating organic wastes are easily determined by the analysis of multiple decay rate coefficients ($k_1$ and $k_2$) and their corresponding biodegradable substrate fractions ($S_1$ and $S_2$).

• Journal of Animal Science and Technology
• /
• v.51 no.4
• /
• pp.337-342
• /
• 2009

The feasibility of reutilization of magnesium ammonium phosphate (MAP) or struvite slurry recovered from the process through microwave irradiation was studied in this experiment. For this purpose, 4 different operations were performed with or without Mg source addition and different levels of MAP recycled in a batch reactor. Dissolution rate of MAP, ${NH_4}^+$ elimination pattern and physicochemical changes of MAP during microwave irradiation were also studied. The result showed that only 33% orthophosphate ($PO_4-P$) and 27% $NH_4-N$ removal occurred without adding any external Mg source (run A), whereas 87% $PO_4-P$ and 40% $NH_4-N$ removed when 1.0 M ratio of $MgCl_2$ (run B) was added based on $PO_4-P$ in influent. Although the addition of 1.0 molar ratio of microwave irradiated MAP (Run C) removed lower $PO_4-P$ and $NH_4-N$ than 1.0 M $MgCl_2$ (run B), $PO_4-P$ removal was double when compared with no Mg addition (run A). Addition of half MAP and half $MgCl_2$ (run D) showed the similar removal efficiency (88% $PO_4-P$ and 35% $NH_4-N$) with sole $MgCl_2$ addition (run B). Based on these results, the reutilization of MAP irradiated by microwave would be a feasible way to enhance the removal efficiencies of N and P, as well as curtail the Mg chemical usage. Track study showed that $NH_4-N$ gradually increased at initial stage of microwave irradiation of MAP, and then started eliminating from liquor as temperature increased over $45^{\circ}C$. Dissolution rate of ${PO_4}^{-3}$ during microwave irradiation was proportional to the initial MAP concentration, having $0.0091x^{0.6373}$ mg/sec. It was found from the scanning electron microscope (SEM) study that physical structure of MAP crystal started breaking down into small cube granules within very short time by electromagnetic vibration force during microwave irradiation and then gradually melted down into solution.

• Korean Chemical Engineering Research
• /
• v.50 no.4
• /
• pp.684-689
• /
• 2012

Poly(acrylic acid) (PAA) microspheres is one of the widely-used polymeric materials for the bio-field application and the electric materials. For the synthesis of PAA microspheres, the polymerization technique using surfactants is applied. After the synthesis, the purification and separation processes are required for the removal of surfactant. When general organic solvents were used, many problems, such as huge amount of waste solvent, additional separation processes, and the possibility of residual media, were occurred. Thus, High-pressure Soxhlet extraction using liquid $CO_2$ was developed to solve these problems. In this study, High-pressure Soxhlet extraction of the synthesized PAA microspheres using liquid $CO_2$ was conducted for the removal of Monasil PCA which is used for the dispersion polymerization of acrylic acid in compressed liquid Dimethyl ether (DME). The morphology of the extracted PAA particles was checked by field emission scanning electron microscopy (FE-SEM) and the residual concentration of Monasil PCA was analyzed by inductively coupled plasma - Optical Emission Spectrometer (ICP-OES). For studying the effect of the solvent effect, Soxhlet extraction was conducted using n-hexane, liquid DME, and liquid $CO_2$. In case of n-hexane, some extracted PAA microspheres were produced. However, deformation was also occurred due to the high thermal energy of n-hexane vapor. Liquid DME could not remove Monasil PCA. When using liquid $CO_2$, the extracted PAA microspheres which were free for the residual solvent were produced without deformation. For finding the optimum operating condition, high-pressure Soxhlet extraction was conducted for 8 hours with changing the temperature of reboiler and condenser. When the extractor temperature is $19.6{\pm}0.2^{\circ}C$ and the pressure is $51.5{\pm}0.5$ bar, the best removal efficiency was obtained.

• Journal of Preventive Medicine and Public Health
• /
• v.32 no.3
• /
• pp.421-426
• /
• 1999

Objectives: An outbreak of dermatosis occurred at a city gas manufacturing factory in Pohang in Aug, 1998. The authors conducted a study to find the cause and prevent the dermatosis, Methods: We conducted a questionnaire survey of 73 workers in the factory twice, once or Aug. 14th and then Sept. 11th, 1998. Also, a dermatologist examined their skin lesions. We suspected ants as the cause, so we collected them for identification. Results: Twelve cases of dermatosis were identified with an attack rate of 16.4%. The attack rates were not different by age, educational level or tenures. The attack rates were 66.6% among production workers, 2.0% among clerical workers, 16.7% among tank trailer drivers and 0% among guards. The attack rate among production workers was significantly higher than that of the others (<0.01). There were no histories of the same dermatosis for the past one year. Histories of other skin diseases and allergies were very rare in both cases with skin diseases and control. Multiple, pruritic, rice-grained to bean sized erythemafous macules or papules with a central biting point could be found after initial severe itching occurred, Three cases showed signs of dermatosis with an allergic nature. The onset of dermatosis was between July 30 and Aug 12 and the durations varied from 5 days to over a month. The most frequent sites of stir lesions were the chest and abdomen (60.6%), and they were also observed on the neck (33.3%), arms (33.3%), shoulders (16.7%) and back (16.7%). Over 10 ants with their wings were collected in the work place and identified as Pachycondyla chinensis, subfamily Ponerinae. Conclusions : We thought that the outbreak of dermatosis was brought about by the ants flying into the work place through the open windows. Further studies on the factors contributing to the prosperity of the ants in this area are needed.

• Journal of environmental and Sanitary engineering
• /
• v.20 no.1 s.55
• /
• pp.64-75
• /
• 2005

The total production of food waste was about 11,398ton/day('03) in Korea. Also, food waste was treated by landfill, incineration, reuse and anaerobic digestion. The method of food waste treatment depended primarily on landfill. However, the method of landfill causing social problems was prevented to treat food waste in the first of January 2005.12) Thus, anaerobic digestion is an important method to treat food waste because of possibility of energy recovery as methane gas. In this study, the possibility of food waste treatment containing high organic material and low pH in the one stage anaerobic reactor to save cost and time and energy recovery using $CH_{4}$ gas by the hybrid anaerobic reactor (HAR) was measured. The HAR was designed by combing the merits of the anaerobic filter (AF) to minimize the microorganism shock when food waste of very low pH was injected and up-flow anaerobic sludge blanket (UASB) to prevent from plugging and channeling phenomena by large suspended solids when semi solids were injected. Granule was packed in the section of HAR. The purpose of the BMP experiment was to measure the amount of methane generated when organic material was resolved under anaerobic conditions, to grasp bio resolution of organic material. Total accumulated methane production per VS amount was $0.471(m^{3}/\cal{kg}\;VS)$. So, the value was about $81.2\%$ of theoretical methane production which was $0.58(m^{3}/\cal{kg}\;VS)$ by elementary analysis and organic matter removal velocity (K) was $0.18(d^{-1})$. From these results, food waste was treated by anaerobic treatment. From this study, $CH_{4}$ generation from food waste (11,398 ton/day) could be estimated. By using an energy conversion factor of Braun's study, $5.97KWh/m^{3}\;CH4,\;60\%\;of\;CH_{4}$ gas generation, the amount of total energy producing food waste is to 6,727MWh/day. It could be confirmed that energy recovery using $CH_{4}$ gas was possible. Above these results, food waste containing organic matters of high concentration could be treated in HRT 30 days under an anaerobic condition, using the hybrid anaerobic reactor and reuse of $CH_{4}$ gas was possible.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.529-536
• /
• 2011

In this study, we confirmed that the SWRO(Sea Water Reverse Osmosis) production water has more hard corrosiveness than the tap water by fundamental experiment. According to the result, the target of this study was aimed at developing maintenance and anti-corrosion method. In the early stages of the research, batch tests using mild steel coupons and electrochemical experiments were applied to compare the corrosiveness between SWRO production water and the tap water. After then, two corrosion control methods for SWRO production water were applied. Liquid lime($Ca(OH)_2$) and Carbon Dioxide($CO_2$) were inserted and compared with the combination of liquid lime with phosphate corrosion inhibitor and carbon dioxide. The water qualities were evaluated through LSI(Langelier Saturation Index) and proper injection ratio was deduced by the result. Since then, simulated loop system test were performed to evaluate anti-corrosion effect depending on corrosion inhibitors. Subsequently, carbon steel pipes equipped at the loop system were detached for SEM, EDX and XRD analysis to acquire quantitative and qualitative data of the major corrosion products inside the pipes. In conclusion, the controled groups with anti-corrosion techniques applied were effective by appearing 97.4% and 90.9% of improvements in both case of liquid lime and the liquid lime with a phosphate corrosion Inhibitor. furthermore, major components of scale were iron oxides, on the other hand, protective effect of film formation by calcium carbonate($CaCO_3$) could be confirmed.