• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.8 no.3
• /
• pp.71-79
• /
• 1994

본 연구는 여러 종류의 직류서보코너에서 적용목적에 대해 최상의 성능을 발휘하면서 가장 높은 효율을 갖는 서보모터를 선정하기 위한 인간 전문가의 지식, 경험과 추론 능력을 갖는 전문가 시스템 개발에 관한 것이다. 제안한 프로그램은 비전문가가 적용시스템의 성능조건과 기계적 데이터만을 입력함으로서 고효율 서보모터가 선정되도록 하였다. 전문가 시스템의 추론기관과 지식베이스는 C 언어로 구현하였으며, 데이터베이스는 제조회사에서 제공한 직류서보모터의 카다로그로부터 구성하였다. 서로 다른 정격을 갖는 직류서보모터의 효율을 비교하는데 있어서는 속도-토크의 운전패턴에 따른 평균효율을 기준으로 하였다. 그리고, 서보모터 선정에 관한 수요관리의 전문가 시스템을 실제 사용되고 있는 여러 적용시스템에 대해 검증하여 신뢰성을 확인하였다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05b
• /
• pp.526-531
• /
• 1997

기존의 발전소 피로수명 평가 프로그램들은 On-Line Fatigue Analysis애 중점을 두고 개발되어 운전 초기부터 Transient모니터링 프로그램이 설치되는 시점까지의 Transient 데이터가 확보되지 않은 오래된 발전소의 경우 전 수명기간 동안의 피로수명 계산에 어려움이 많다. 따라서 본 연구에서는 특별한 경우를 제외하고는 Off-Line 계산을 하는 것이 경제적이고 피로수명 평가에 문제가 되지 않는다고 판단하여 Transient 모니터링을 용해 Transient 종류를 파악하고 이를 데이터베이스화 한뒤 충분한 시간을 가지고 Transient 이력 과 응력데이타를 조합하여 CUF를 계산하는 등 프로그램 기능의 모듈화를 시도하여 필요한 기능을 지속적으로 보완 개발해 나갈 수 있도록 하였다. 본 Software는 국내 원전이 Transient Counting이나 피로분석의 전산화와 관련한 경험이 부족하고 또 외국 프로그램을 도입하여 사용하기에는 과거 데이터가 부족하여 활용에 어려움이 많을 것을 고려하여 기존의 수작업에 의한 Fatigue Evaluation 의 불편함을 보완하고 On-Line Analysis의 필요성과 Off-Line Analysis외 경제성을 적절히 조합하여 현재 발전소 환경에서 가장 적절히 사용할 수 있도록 개발 을 추진하였고 향후 필요한 기능은 지속적으로 보완함으로써 발전소 수명관리에 유용하게 사용될 것이다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05a
• /
• pp.521-525
• /
• 1996

국내 최초 운전경험을 갖는 CE 형 원전 설계인 영광 원자력 발전소 3,4호기의 제어봉 제어구동 설비는 시운전 시험 과정 중 제어봉 제어용 전원설비의 전기적 잡음에 의해 일부 제어봉이 미끄러짐으로서 원자로가 계속적으로 불시정지 되었다. 이와 같은 현상으로 이미 국내에서도 가동중인 고리 원자력 발전소 2호기에서도 고주파 용접기의 전도성 잡음에 의하여 제어봉 제어회로에 영향을 주어 여러차례 원자로 정지를 겪은바 있다. 따라서 원자력 안전기술원에서 제어봉 미끄러짐의 원인을 조사결과 직접적인 원인은 제어봉 전원공급 설비에서 발생된 전기적 잡음에 의해 제어봉 제어회로의 오동작 및 발전소 부하탈락 시험시 소내전원 주파수 상승으로 제어봉 코일에 정격이하의 저전압이 공급됨으로서 원자로가 불시 정지 됨을 확인 하였다.

• Review of KIISC
• /
• v.33 no.4
• /
• pp.47-55
• /
• 2023

자동차 산업에서 전자제어장치 (Electronic Controller Unit, ECU)를 활용한 혁신으로 운전자들은 안전하고 편리한 운전경험을 누리고 있다. 그러나 이와 동시에, 차량 내부 ECU 간의 통신을 지원하는 CAN (Controller Area Network)을 대상으로 한 악의적인 침입과 사이버 공격의 위협 역시 증가하고 있다. 이러한 문제에 대응하기 위해 많은 연구가 진행 중이며, 특히 자동차 침입 탐지 시스템 (Intrusion Detection System, IDS)의 발전이 주목받고 있다. 그러나 대부분의 IDS는 주로 공격을 탐지하는 데 집중되어 있으며, 실제 악의적인 메시지를 전송한 ECU를 정확히 식별하는 데에는 한계점이 있다. 악의적인 ECU를 식별하는 기술은 공격 ECU를 격리시키거나 펌웨어 업데이트 등의 보안 패치를 적용하는데 필수적인 기술이다. 본 고에서는 현재까지 제안된 CAN에서의 악의적인 ECU를 식별하기 위한 기술들에 대해 살펴보고, 비교 분석 및 한계점에 대해 분석하고자 한다.

• The Journal of the Korea Contents Association
• /
• v.19 no.5
• /
• pp.350-362
• /
• 2019

The purpose of this study was to examine the effects of job characteristics and health on accident experience by analyzing the data of transportation workers according to age. The analysis used data from 'the fourth Korean Working Conditions Survey(KWCS)'. A total of 1,997 transport workers data were finally analyzed, and correlation analysis, crossover analysis and logistic regression analysis were performed. It was confirmed that there was no correlation between the age of the transport workers and the accident experience. In the relationship between the characteristics of transportation workers and the experience of the accident, it was found that, in the case of older workers, there was a significant effect in the order of 'at mistake someone else hurt', 'musculoskeletal problem', 'cardiovascular problem' and 'repetitive movements of hands or arms', the model explaining power was 56.9%(p <.01). In the case of non-older workers, it was found that 'depression and anxiety disorder', 'relationship between job and safety', 'at mistake someone else hurt' and 'labor union', the model explaining power was 21.8%(p <.01). Therefore, in order to promote prevent accidents of transportation workers in future, it is necessary to consider various variables such as health and job characteristics besides age.

• Journal of agricultural medicine and community health
• /
• v.44 no.3
• /
• pp.124-137
• /
• 2019

Objectives: The purpose of this study was factors affecting self-efficacy of cardiopulmonary resuscitation (CPR) in adults. Therefore, the provide basic data for strategy development to improve the performance rate of bystander CPR. Methods: The data were collected from 164,165 adults of the 2016 Korean Community Health Survey. The survey method was 1:1 interview with households, and the survey period was from August 16, 2016 to October 31, 2016. The survey variables were as follows: self-efficacy of CPR, awareness of CPR, training experience of CPR, demographic characteristics, medical characteristics, health promoting behaviors, and safety practices. Results: The rate of self-efficacy of CPR in adults was 60.6%. Factors affecting self-efficacy of CPR were age, sex, residence, education level, occupation, marital status, any CPR training, CPR training within the last 2 years, CPR training with manikin within the last 2 years, emergency room visit within the last 1 year, physical activity status, drive a bicycle, seat belts on rear seat, seat belts when riding a bus were statistically significant. Conclusions: In conclusion, in order to improve the self-efficacy of CPR in adults, the recent experience rate of CPR education, the practice rate of health promotion behavior, and the practice rate of safety behavior should be improved. The government should expand the provision of education programs to improve the self-efficacy of CPR and actively prepare national-level public advertisements strategies.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.1
• /
• pp.47-52
• /
• 2013

The higher energy efficiency for ship and the lower pollution for global environment are required strictly. However the performance of marine diesel engine is gradually deteriorated with time. And also the operation condition is varied with sea conditions. Hence the optimization for operating condition of marine engines is needed for energy saving and environment kindly. In this paper, it was attempted to investigate the influence of aging for marine diesel engine. The deterioration of engine performance is assessed by the calculation results of the simulation program for two-stroke marine diesel engine developed by author which was reported before. And three parameters for deterioration of engine performance were considered such as lower efficiency of turbocharger by fouling, increase of blow-by gas due to wear of cylinder liner and getting worse of combustion by poor injection. By the results, it was shown that the influence of engine performance by aging was relatively not so small - 10.4 bar low in Pmax and 3.2% decrease in Pmi.

• Journal of Energy Engineering
• /
• v.22 no.2
• /
• pp.148-155
• /
• 2013

The steam generators of OPR-1000 plants have Alloy 600 and Alloy 690 as the tube material and its tube expansion method is the explosive expansion method. According to the experience of these plants, circumferential cracks were largely occurred in steam generator tubes expanded by the explosive expansion method and their locations were the outer surface of tube expansion transition region surrounding with piled-up sludge. But even though tubes have the same conditions, tubes with the hydraulic expansion method shows the prevail trend of axial cracks compared to circumferential cracks. Therefore in this study, in order to identify the difference of such phenomena as above, configurations of tube and tubesheet were modeled and at operating conditions, stress values applied in the tube expansion transition area in accordance with tube expansion methods were calculated by using computational program and the direction and the predominance of cracks were evaluated.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.3
• /
• pp.233-244
• /
• 2008

A conceptual design study for a pyroprocesing facility, has been carried out in this study, which is available for the recovery of uranium and transuranic elemental group(TRU), that is, reusable as a nuclear fuel especially in a next generation-type reactor. The scale of this facility has been chosen as 20 kg HM/batch, comparatively small engineering size in order to collect scale-up data for the design of a commercial facility as well as to get operational experience. The spent fuel to be handled in this process is as follows : 3.5 % enriched uranium fuel, 35,000MWd/tU and 5-year cooled. The major items considered in the conceptual study are a building lay-out including various hot cells, safety management of the process operation in conjunction with material balance control, radiation safety, inert atmosphere control in shielded hot cells, and criticality control of uranium and TRU products.

• International Journal of Highway Engineering
• /
• v.13 no.1
• /
• pp.149-156
• /
• 2011

Considerable evaluation is needed to design a new longitudinal tunnel in advance because it damaged drivers' driving safety and heightened the possibility of traffic accidents with its physical characteristics. Specifically, considering traffic psychological and ergonomic factors was very important to prevent the difficulty of maintaining safe speed, the increase of the drowsy driving, the fatality of traffic accidents, and subjective feelings such as anxiety while driving a car through the tunnel, from design to construction. This study dealt with driving safety evaluation of an original road alignment design for the longitudinal tunnel (length: above 10km) with a driving simulator, and helped us to improve an original road alignment design and make an alternative road alignment design with presenting risky districts. The results of experiment showed that inflection points were revealed more risky districts, because they impaired driving safety and elevated driver workload while driving a car through around the inflection points of two-way route. Finally, the limitations and implications of this study were discussed.