• Journal of Soil and Groundwater Environment
• /
• v.11 no.6
• /
• pp.8-17
• /
• 2006

Laboratory scale experiments were performed to investigate the removal efficiency of the in-situ chemical oxidation method and the air-sparging method for diesel contaminated soil and groundwater. Two kinds of diesel contaminated soils (TPH concentration : 2,401 mg/kg and 9,551 mg/kg) and groundwater sampled at Busan railroad station were used for the experiments. For batch experiments of chemical oxidation by using 50% hydrogen peroxide solution, TPH concentration of soil decreased to 18% and 15% of initial TPH concentration. For continuous column experiments, more than 70% of initial TPH in soil was removed by using soil flushing with 20% hydrogen peroxide solution, suggesting that most of diesel in soil reacted with hydrogen peroxide and degraded into $CO_2$ or $H_2O$ gases. Batch experiment for the air-sparging method with artificially contaminated groundwater (TPH concentration : 810 mg/L) was performed to evaluate the removal efficiency of the air-sparging method and TPH concentration of groundwater decreased to lower than 5 mg/L (waste water discharge tolerance limit) within 72 hours of air-sparging. For box experiment with diesel contaminated real soil and groundwater, the removal efficiency of air-sparging was very low because of the residual diesel phase existed in soil medium, suggesting that the air-sparging method should be applied to remediate groundwater after the free phase of diesel in soil medium was removed. For the last time, the in-situ box experiment for a unit process mixed the chemical oxidation process with the air-sparging process was performed to remove diesel from soil and groundwater at a time. Soil flushing with 20% hydrogen peroxide solution was applied to diesel contaminated soils in box, and subsequently contaminated groundwater was purified by the air-sparging method. With 23 L of 20% hydrogen peroxide solution and 2,160 L of air-sparging, TPH concentration of soil decreased from 9,551 mg/kg to 390 mg/kg and TPH concentration of groundwater reduced to lower than 5 mg/L. Results suggested that the combination process of the in-situ hydrogen peroxide flushing and the air-sparging has a great possibility to simultaneously remediate fuel contaminated soil and groundwater.

• Archives of design research
• /
• v.16 no.1
• /
• pp.181-198
• /
• 2003

The purpose of this study is to develop a on-line design tool for effectively coping with e-Business environment, or product design process into a Cyber model for traditional manufacturers which attempts new product development under such environment. It was finally developed as a model named $\ulcorner$Design Vortal Site; e-BVDS) that was based on the structure and style of internet web site. Results of the study can be described as follows ; \circled1 e-Business is based on the Internet. All processes in the context of e-Business require models whose structure and method of use are on-line styles. \circled2 In case that a traditional manufacturing business is converted into e-Business, it is better to first consider Hybrid Model that combines resources and advantages of both such traditional and digital businesses. \circled3 The product design process appropriate for e-Business environment has to have a structure and style that ensure utilization of the process as an Internet web site, active participation by product developers and interactive communication between participants in designing and designers. \circled4 $\ulcorner$e-BDVS) makes possible the use of designers around the wend like in-house designers, overcoming lack in creativity, ideas and human resources traditional business organizations face. However, the operation of $\ulcorner$e-BDVS$\lrcorner$ requires time and budget investments in securing related elements and conditions. \circled5 Cyber designers under $\ulcorner$e-BDVS$\lrcorner$ can easily perform all design projects in cyber space. But they have some limits in playing a role as designers and they have difficulty in getting rewards if such projects completed by them are not finally accepted. \circled6 $\ulcorner$e-BDVS) ensures the rapid use of a wide range of design information and data, reception of a variety of solutions and ideas and effective design development, all of which are not possible through traditional processes. However, this process may not be suitable to be used routine process or tool. \circled7 $\ulcorner$e-BDVS$\lrcorner$ makes it possible for out-sourcing or partners businesses to overcome restrictions in time and space and improve productivity and effectiveness. But such they may have to continue off-line works that can not be treated on-line.

• Korean Journal of Environmental Agriculture
• /
• v.17 no.1
• /
• pp.70-75
• /
• 1998

A model of pond system is developed for treatment and recycling of excreta from twenty-five adult dairy cattle. It is composed of wastewater treatment ponds and small fish ponds. Those are three facultative ponds in series; primary-secondary-tertiary pond and these are designed to rear carps without feeding. A pit is constructed at the bottom of primary pond for efficient sludge sedimentation and effective methane fermentation. It is contrived to block into it the penetration of oxygen dissolved in the upper layer of pond water. The excreta from the cattle housed in stalls are diluted by water used for clearing them. The washed excreta flow into the pit. The average yearly $BOD_5$ concentration of influent is 398.7mg/l. That of the effluent from primary, secondary and tertiary pond of the system is 49.18, 27.9, and 19.8.mg/l respectively. Approximate 88, 93, and 95 % of BOD5 are removed in each pond. The mean yearly SS concentration of influent is 360.5 mg/l That of the effluent from each pond is 53.4, 45.7, and32.7mg/l respectively. Approximate 86, 88, and 91% of SS are removed in each pond. The $BOD_5$ concentration of secondary and tertiary pond can satisfy 30mg/l secondary treatment standard. The SS concentration of effluent from tertiary pond, however, is slightly greater than the standard, which results from activities of carps growing in the pond. The average yearly total nitrogen concentration of influent is 206.8mg/l and that of the effluent from each pond is 48.6, 30.8, and 21.0mg/l respectively. Approximate 74, 88, and 90% of total nitrogen are removed in each pond. The mean yearly total phosphorous concentration of influent is 20.7mg/l and that of the effluent from each pond is 5.3, 3.2, and 2.1mg/l respectively. Approximate 97, 98, and 99% of total phosphorous are removed in each pond. The high removal of nitrogen and phosphorous results from active growth of algae in the upper layer of pond water. Important pond design parameters for southern part of Korea -- areal loading of BOD5, liquid depth, hydraulic detention time, free board, and pond arrangement -- are taken up.

• Korean Journal of Environment and Ecology
• /
• v.31 no.5
• /
• pp.444-454
• /
• 2017

There are many ongoing studies of infectious diseases as the major factor responsible for global declining of the amphibian population. Although some point out the amphibian rearing facilities like frog farms as one of the important sources of harboring and spreading amphibian infectious pathogens in the wild, there have been few related studies in South Korea. In this study, we investigated the bacterial and fungal colonies on the skin and in the internal organs of frogs and tadpoles collected inside and outside of Dybowski's brown frog farms in Inje, Goesan, and Gongju to compare the difference according to the region and between inside and outside the farm. We also intended to classify the bacteria collected from the tadpoles into species by analyzing 16s rDNA gene sequences. The result showed that the number of bacterial colonies found in the skin and gut of frogs and the number of fungal colonies found in the skin and liver of frogs collected in Goesan was significantly greater than those in the frogs in Inje. However, there was no difference between the frogs collected inside and outside of farms in both regions. In the case of tadpoles, the number of fungal colonies in the tadpoles collected from Gongju was greater than that in the tadpoles collected from Inje. The comparison of inside and outside frog farms showed that there were more bacterial colonies on the skin of the tadpoles collected from inside than outside the frog farm in Inje and more bacterial colonies in the organs of the tadpoles collected from outside than inside the farm in Gongju. The frogs with higher condition factor (body weight/snout-vent length*100) showed fewer bacterial colonies on the skin and fewer fungal colonies in the heart, but there were no significant relationships in tadpoles. We identified the total of 15 genera and four phyla of bacteria, but the difference according to regions and between inside and outside farm was not evident. The result of this study indicates that the different conditions according to the locality of farm and between inside and outside farm cause the difference in the population sizes of bacterial and fungal colonies and that it can affect the overall health condition of Dybowski's brown frogs in the farm. Moreover, the result suggests that effective disease control in the facility is greatly necessary to ensure successful operation of amphibian rearing facility and to prevent the possible spread of diseases from the facility to the wild.

• Clean Technology
• /
• v.26 no.2
• /
• pp.102-108
• /
• 2020

In recent years, packed column has been widely used in separation processes, such as absorption, desorption, distillation, and extraction, in the petrochemical, fine chemistry, and environmental industries. Packed column is used as a contacting facility for gas-liquid and liquid-liquid systems filled with random packed materials in the column. Packed column has various advantages such as low pressure drop, economical efficiency, thermally sensitive liquids, easy repairing restoration, and noxious gas treatment. The performance of a packed column is highly dependent on the maintenance of good gas and liquid distribution throughout a packed bed; thus, this is an important consideration in a design of packed column. In this study, hydraulic pressure drop, hold-up as a function of liquid load, and mass transfer in the air, air/water, and air-NH₃/water systems were studied to find the geometrical characteristic for raschig super-ring experiment dry pressure drop. Based on the results, design factors and operating conditions to handle noxious gases were obtained. The dry pressure drop of the random packing raschig super-ring was linearly increased as a function of gas capacity factor with various liquid loads in the Air/Water system. This result is lower than that of 35 mm Pall-ring, which is most commonly used in the industrial field. Also, it can be found that the hydraulic pressure drop of raschig super-ring is consistently increased by gas capacity factor with various liquid loads. When gas capacity factor with various liquid loads is increased from 1.855 to 2.323 kg^-1/2 m^-1/2 S^-1, hydraulic pressure drop increases around 17%. Finally, the liquid hold-up related to packing volume, which is a parameter of specific liquid load depending on gas capacity factor, shows consistent increase by around 3.84 kg^-1/2 m^-1/2 S^-1 of the gas capacity factor. However, liquid hold-up significantly increases above it.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.6
• /
• pp.643-651
• /
• 2001

Paddlewheel-driven circulation in a culture pond has been simulated based on the depth integrated 2 dimensional hydrodynamic model. Acceleration by paddlewheel is expressed as shaft force divided by water mass discharged by paddlewheel blades. The model has been calibrated and applied to culture ponds as following steps:- i) The model predicted velocities at every 10 m along longitudinal direction from the paddlewheel. The model was calibrated comparing the results with the measured values at mass correction factor $\alpha$ and dimensionless eddy viscosity constant $\gamma$, respectively, in a range $15\~20$ and 6. ii) Wind shear stress was simulated under conditions of direction $0^{\circ}C,\;90^{\circ}C\;and\;180^{\circ}C$ and speed 0.0, 2.5, 5.0 and 7.5 m/s. Change rate of current speed was <$1\%$ at wind in parallel or opposite direction to the paddlewheel-driven jet flow, while $4\%$ at orthogonal angle. iii) The model was then applied to 2 culture ponds located at the Western coast of Korea. The measured and predicted currents for the ponds were compared using the regression analysis. Analysis of flow direction and speed showed correlation coefficients 0.8928 and 0.6782 in pond A, 0.8539 and 0.7071 in pond B, respectively. Hence, the model is concluded to accurately predict circulation driven by paddlewheel such that it can be a useful tool to provide pond management strategy relating to paddlewheel operation and water quality.

• Food Science and Preservation
• /
• v.16 no.5
• /
• pp.650-655
• /
• 2009

This study was conducted to measure the quality characteristics of rough rice during low temperature drying by using an experimental dryer and heat pump with a capacity of 150kg at four temperature levels of 20, 30, 40, and $50^{\circ}C$. The quality and proper drying temperature of rough rice was investigated by measuring variations in moisture content, crack rates, germination rates and cooked rice. Temperatures over $40^{\circ}C$ is considered a high-temperature area, and below $40^{\circ}C$ is considered a low-temperature area. The drying rates were 0.3, 0.6, 0.9, and 1.3%/hr, and the crack ratios were 0, 1.6, 6.8, and 24.2% at the drying temperatures of 20, 30, 40, and $50^{\circ}C$, respectively, which showed that the higher the drying temperature was, the higher the drying rate and crack rate was. Therefore, 20 and $30^{\circ}C$ were found to be appropriate drying temperatures for avoiding crack formation, and $50^{\circ}C$ was inappropriate. At $40^{\circ}C$, the operation methods needed to be modified to limit cracking, such as increasing the tempering time. Also, as the drying temperature increased, the germination rate decreased. Germination rates at 20 and $30^{\circ}C$ were suitable for using the rough rice as a seed, and those at 40 and $50^{\circ}C$ were over 80%, which is the minimum allowable percentage. In the sensory evaluation of cooked rice, the quality of appearance, taste, and texture varied as a function of drying temperature. When considering these factors, the cooked rice that was dried at 20 and $30^{\circ}C$ was better than the cooked rice dried at high-temperature. Consequently, in view of drying temperature and rates, the best conditions for drying rough rice were below $30^{\circ}C$ and below 0.6%/hr.

• Communications of Mathematical Education
• /
• v.16
• /
• pp.217-218
• /
• 2003

제7차 교육과정의 기본방향인 '21세기의 세계화 정보화 시대를 주도할 자율적이고 창의적인 한국인 육성'에서 볼 수 있듯이, 새로운 교육과정에서는 학생들의 창의력을 신장시키기 위한 방안으로 교과별 교육과정이나 재량활동 운영 등을 제시한 바 있다. 수학교육에서도 이러한 시대적 흐름에 발맞추어 수학적 창의력의 신장이 강조되고 있는 상황이다. 그동안 이론적인 측면과 실제적인 측면에서 수학적 창의성에 대한 성과가 축적되었다. 이론적인 측면에서 볼 때, Haylock(1987)등에 의해 창의력과 수학적 창의력의 구분되었으며, 특히 '수학적' 창의력에 대한 다양한 정의가 제안되었다. 실제적인 측면에서도 수학적 창의력을 측정하려는 평가 도구들이 그 동안 여러 가지로 개발하였다. 그러나, 이러한 수학적 창의력에 관한 전반적인 연구는 종국적으로 교실 수학수업에 반영되어야 함에도 불구하고, 그리 만족스럽지 못한 상황이다. 특히, 교실에서 수학수업을 실제로 담당하는 교사들이 수학적 창의력을 위한 수업을 하고자 하더라도 당장 가까이에서 구할 수 있는 교수 학습 자료가 여전히 부족한 상황이다. 물론 그 동안 교실 수학수업에서 사용할 수 있는 창의력 개발 프로그램이 전무한 것은 아니다. 그런데 그들 대부분은 게임이나 퍼즐을 이용한 것으로 그 수준이 단순 흥미유발에 그치고 있거나 소수의 영재아를 위한 소재를 중심으로, 특히 수학적 사고 과정을 따르기보다는, 시행착오를 거쳐 원하는 결과를 얻을 가능성이 많으며, 수학과의 연계성이 불분명한 채로 단순놀이에 그치는 경우가 적지 않아, 수업과 연관되어 창의력의 신장이라는 측면에서 볼 때, 적용하기 어려운 사례가 많다. 이러한 상황을 개선하는 데 기여하고자, 현재 교과교육공동연구 지원사업의 하나로 한국 학술 진흥재단의 지원을 받아, '개방형 문제(open-ended problems)'를 중심 소재로 한 '수학적 창의성'을 신장하기 위한 교수학습 프로그램을 개발하여, 중학교 1학년을 대상으로 연구를 진행하고 있다. 개방형 문제라 함은 명백한 정의가 어렵지만 Pehkeon(1995)는 개방형문제의 정의를 명백히 하기위한 시도로서 그 반대로 닫힌 문제에 대한 정의로부터 시작하여, 어떤 문제가 닫혀있다고 하는 것은 그 문제의 출발 상황과 목표 상황이 닫혀 있는 것, 즉 명백히 설명되어있을 때라면 개방형 문제는 이와 반대의 개념임을 시사하였다. Silver(1995)는 개방형 문제를 문제 자체가 다른 해석이 가능하거나 서로 다를 인정할만한 답을 가질 수 있는 문제 또는 풀이과정이 다양한 문제, 자연스럽게 다른 문제들을 제안하거나 일반화를 제시할 수 있는 문제라고 정의하였다. 따라서 개방형 문제란 출발상황이나 목표 상황의 일부가 닫혀있지 않을 때를 말하고 문제의 조건을 만족하는 해답이 여러 가지로 존재하는 문제를 뜻한다. 수학적 창의력을 개발하는 데, 다른 문제 유형보다도, 개방형 문제가 유리하다는 점은 이미 여러 학자들에 의해 주장되어왔다. 미국 국립영재교육센터(NRCG/T)는 기존의 사지선다형이나 단답형 문제와 질문들은 학생들의 사고 능력에 관한 정보를 거의 알려주지 못하기 때문에 한 가지 이상의 답을 요구하는 ‘open-ended' 또는 ’open-response' 문제와 질문을 가지고 수학 분야에서의 창의적 사고 능력과 표현능력을 측정해야 한다고 하였고, 개방형 문제가 일반적으로 정답이 하나인 문제보다 고차원적인 사고를 요구하게 하는 문제 형태라고 하였다. 본 연구에서는 이러한 근거를 바탕으로 개방형 문제의 유형을 다양한 답이 존재하는 문제, 다양한 해결 전략이 가능한 문제, 답이 없는 문제, 문제 만들기, 일반화가 가능한 문제 등으로 보고, 수학적 창의성 중 특히 확산적 사고에 초점을 맞추어 개방형 문제가 확산적 사고의 요소인 유창성, 독창성, 유연성 등에 각각 어떤 영향을 미치는지 20주의 프로그램을 개발, 진행하여 그 효과를 검증하고자 한다. 개방형 문제를 활용한 수학적 창의력 신장 프로그램을 개발하고 현장 학교에 실험 적용하여 그 효과를 분석하고자 하는 본 연구는 창의력 신장에 비중을 두는 수학과 교수-학습 과정에 실제적인 교수 학습 자료를 제공하는 것뿐만 아니라 교사들에게는 수학교실에서 사용 가능한 실제적인 활용방안을, 학생들에게는 주어진 문제를 여러 가지 각도에서 생각하면서 다양한 사고를 경험하는 기회를 가질 수 있어, 수학을 보는 학생들의 태도에도 긍정적인 변화를 가져올 수 있을 것이라 기대한다.

• The Korean Journal of Nuclear Medicine
• /
• v.35 no.2
• /
• pp.89-99
• /
• 2001

Purpose: In this study, we developed a new software tool for the analysis of renal scintigraphy which can be modified more easily by a user who needs to study new clinical applications, and the appropriateness of the results from our program was studied. Materials and Methods: The analysis tool was programmed with IDL5.2 and designed for use on a personal computer running Windows. For testing the developed tool and studying the appropriateness of the calculated glomerular filtration rate (GFR), $^{99m}Tc$-DTPA was administered to 10 adults in normal condition. In order to study the appropriateness of the calculated mean transit time (MTT), $^{99m}Tc-DTPA\;and\;^{99m}Tc-MAG3$ were administered to 11 adults in normal condition and 22 kidneys were analyzed. All the images were acquired with ORBITOR. the Siemens gamma camera. Results: With the developed tool, we could show dynamic renal images and time activity curve (TAC) in each ROI and calculate clinical parameters of renal function. The results calculated by the developed tool were not different statistically from the results obtained by the Siemens application program (Tmax: p=0.68, Relative Renal Function: p:1.0, GFR: p=0.25) and the developed program proved reasonable. The MTT calculation tool proved to be reasonable by the evaluation of the influence of hydration status on MTT. Conclusion: We have obtained reasonable clinical parameters for the evaluation of renal function with the software tool developed in this study. The developed tool could prove more practical than conventional, commercial programs.

• 대한공업교육학회지
• /
• v.39 no.1
• /
• pp.189-208
• /
• 2014

The purpose of this research was to investigate the critical issues and practical strategies that Korean technology teachers perceived. To accomplish the purpose of this study, a qualitative study was conducted to identify critical issues and practical strategies of Korean technology education targeted on Korean technology teachers. A purposeful sampling for choosing technology teachers was used for this study with three selection conditions: 1) 'Excellent Korean technology teacher' award winning teachers, or 2) technology teachers actively involved in both on-line and off-line teachers' association, and 3) leaders in local technology teachers' association. This study conducted exploratory in-depth interviews with selective 15 technology teachers regarding critical issues and practical strategies of Korean technology teachers. The interpretation of the interview content was conducted by two researchers using the thematic analysis which analyzed the frequency of concepts, words, and meanings held from collected data. In the conclusion, critical issues researchers identified were 1) curriculum problems, 2) education environment and facilities problems, 3) teachers' problems, 4) students' problems, 5) related research institution and college problems, 6) social problems. Secondly, Korean technology teachers agreed with following practical strategies 1) separating technology education from home economic education, 2) sharing practices on managing and improving educational environment and laboratory for technology education, 3) actively involving in technology teachers' group, 4) motivating students using hands-on activity 5) improving the quality and the quantity on technology teachers preparatory institution, 6) advertising the values of technology education to the public. Lastly, the positive factors to succeed technology education were 1) technology education satisfying social needs and 2) technology teachers' will or passion toward improving their technology classrooms. The negative factors to hinder technology education were 1) low self-respect of Korean technology teachers and 2) rejection or retarded acceptance toward social transition. Several recommendations based the conclusion were suggested as 1) implementing supplementary study toward selected critical issues and 2) conducting exemplary case studies regarding concrete practical strategies for improving challenges of Korean technology education.