• Journal of the Korea Convergence Society
• /
• v.9 no.2
• /
• pp.303-311
• /
• 2018

Squat exercise is one of the free weight exercises that are recognized as important from a bio-mechanical point of view. It is an important exercise to train lower extremity muscles in daily activities or sports activities and to strengthen trunk and lower body strength. It is effective and accurate to use a variety of assistive devices to calibrate athletic posture with squat exercise supported interactive device. The issues of the structural analysis for design a foot plate for squat exercise is to model the behavior by simplifying the dynamic behavior. In this paper, the authors proposed a exercise system design method for the vertical load distribution and bio-mechanical signal process used for the squat exercise mechanism analysis, and based on these results, designed device can make the more safe and reliable free weight exercise. It is applied to system design through design method with kinematic dynamic, VR device and estimation model of exercise.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2016.07a
• /
• pp.117-118
• /
• 2016

줄넘기는 줄을 돌리는 손동작과 뛰어오르는 동작이 결합된 운동으로 정확한 카운트를 위해서는 두 동작을 함께 고려해야 한다. 이전의 연구들에서는 단순 반복적인 운동인 윗몸일으키기, 팔굽혀펴기, 아령 운동과 함께 치부하여 하나의 동작만을 체크하여 카운트 하였다. 이것은 실제 줄넘기 동작과는 차이가 있으며 두 동작 중 하나의 동작만을 하고 있다면 확인해내지 못하는 문제가 있다. 본 논문에서는 6축 가속도 자이로 센서를 이용하여 두 동작을 모두 확인하고 카운트하는 방법을 제안한다. 가속도 센서를 이용하여 뛰어오르는 동작을 확인하며 자이로 센서를 이용하여 손동작을 확인한다. 이때 확인되는 값의 파형을 이용하여 줄넘기 횟수를 카운트하게 된다. 제안하는 방법은 실제 실험을 통하여 카운트 방법의 성능을 확인할 수 있다.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2008.04a
• /
• pp.50-53
• /
• 2008

본 논문에서는 복잡한 환경에서 휴머노이드 로봇의 영상기반 운동계획을 제안하였다. 먼저 영상전처리 과정을 통해 작업환경에서 경로 계획으로 최적 경로를 탐색하고, 탐색된 경로의 거리와 방향각에 따라 퍼지규칙을 적용하여 보행 프리미티브를 선택하는 운동계획방법을 제안하였다. 다양한 장애물을 갖는 복잡한 환경에서 로봇의 보행 프리미티브를 사용하여 영상기반의 운동계획이 실시간으로 수행 가능하도록 설계하였다. 제안한 운동계획방법은 임베디드 비전 시스템을 사용한 휴머노이드 로봇을 실제 제작하여 실험을 통해 성능을 검증하였다.

• Journal of Navigation and Port Research
• /
• v.42 no.6
• /
• pp.395-405
• /
• 2018

Seakeeping safety module in Korean e-Navigation system is one of the ship remote monitoring services that is employed to ensure the safety of ships by monitoring the ship's real time performance and providing a warning in advance when the abnormal conditions are encountered in seakeeping performance. In general, seakeeping performance has been evaluated by simulating ship motion analysis under specific conditions for its design. However, due to restriction of computation time, it is not realistic to perform simulations to evaluate seakeeping performance under real-time operation conditions. This study aims to introduce a reasonable and faster method to predict a ship's roll motion which is one of the factors used to evaluate a ship's seakeeping performance by using a machine learning-based surrogate model. Through the application of various learning techniques and sampling conditions on training data, it was observed that the difference of roll motion between a given surrogate model and motion analysis was within 1%. Therefore, it can be concluded that this method can be useful to evaluate the seakeeping performance of a ship in real-time operation.

• 한국항공운항학회:학술대회논문집
• /
• 2015.11a
• /
• pp.50-54
• /
• 2015

구형무인비행체는 다중 모터를 이용한 무인항공기에 비행 소형화, 경량화, 경제화 등의 장점을 가지고 있다. 본 논문에서는 구형무인비행체의 경로 추종을 위한 제어기 설계 및 성능에 대한 내용을 다루고 있다. 먼저 구형무인비행체의 운동방정식이 제어기 설계를 위해 유도되었고, 유도된 운동방정식을 이용해 경로 추종 제어기를 설계하였다. 구형무인비행체의 자세제어는 무게중심을 변화하는 방법을 사용하였다. 요구 경로를 설정하여 설계된 제어기의 경로 추종 성능을 MATLAB 시뮬레이션을 통해 확인하였다. 시뮬레이션 결과, 제시된 제어기가 설정된 경로를 추종하고 있음을 확인하였다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.2
• /
• pp.228-233
• /
• 2014

In this paper, the motion performance in waves for the training ship Kaya of Pukyong National University is obtained by using a computer program based on Strip method. To guarantee the pleasant seafaring in ocean, the vertical acceleration of ship motion is calculated according to the location of the ship. The results of calculation by changes of ship speed are compared with the guideline of MSI(Motion Sickness Incidence). The degree of motion sickness is shown and discussed through the comparison between calculated vertical acceleration spectrum and MSI guideline. The computational results of MSI were as follow; when ship speed increased in the order of 5 knots, 10 knots, 12 knots and encounter angle became the bow quartering sea of $120^{\circ}$ compared to $180^{\circ}$ and $150^{\circ}$, the vertical acceleration values grew higher.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.3 no.4
• /
• pp.38-43
• /
• 1999

An experimental study was carried out, in order to set up the procedure for evaluation of hot fire test, to investigate the effect of mixture on combustion performance and combustion stability , and to determine the optimum design condition for designing the liquid rocket engine. $HNO_3$/Kerosene uni-element liquid rocket engine(thrust 24 $\iota{b}_f$, chamber pressure 200 psia) using impinging streams doublet injector was designed, and ground hot-fire test was carried out. To prevent or reduce the hard start during ignition period, two step ignition method was used. This was accomplished by maintaining about 25% of the designed operating pressure doting transient period, then chamber pressure was built up to the designed operating pressure. Maximum combustion efficiency was at O/F ratio 3.6, and combustion efficiency is decreased with increasing momentum ratio.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.11a
• /
• pp.12-13
• /
• 2018

For navigation safety, navigators have to be familiar with maneuverabilities. When a vessel encounters a danger of collisions and stranding, maneuverability is essential for the safety of ship. It is composed of turning, course change, speed change, etc. In the latter part, maneuverabilities and motion of Training Ship HANBADA are provided by full-scale measurement in the $10^{\circ}/10^{\circ}$ Zig-Zag Test, $20^{\circ}/20^{\circ}$ Zig-Zag Test and Turning Circle Test(Port and Starboard). It aims to provide information on maneuverabilities and motion of Training Ship HANBADA so that the navigators can take proper action to avoid.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.5
• /
• pp.961-967
• /
• 2007

Automatic water feeding system for chickens is the one of the most important devices at poultry farms. Chickens drink water directly from a water feeder nipple of the automatic water feeder. Check valve inside the water feeder nipple is open when they drink water and is closed otherwise. There are two types of nipples. One is the piston nipple, and the other is the ball nipple. Because the nipple stick in the ball nipple can move freely, the sloping mechanism of the ball nipple works well. but it has complicated mechanism. On the other hand, the piston nipple has very simple structure, but its movement is limited so it can move only up-and-down. To overcome those limitation, the piston nipple with sphere valve seat face (sphere face piston nipple) has been developed and is just distributed at domestic markets. The experimental performance test of the commercialized sphere piston nipple has been conducted, and compared with the performance of the ball nipple and the piston nipple which are domestic products. As the result, sphere piston nipple shows excellent performance compared to that of the piston nipple but its performance is similar to ball type nipple.

• Bulletin of the Korean Space Science Society
• /
• 2003.10a
• /
• pp.68-68
• /
• 2003

본 논문은 별 추적기의 여러 가지의 성능변수 중에 광행차가 성능에 미치는 영향을 연구하였다. 일반적으로 광행차는 별 추적기의 저주파오차로 작용하며, 별 추적기 좌표계에서 최대 27" 정도의 성능을 감소시킨다. 지구가 태양 주위를 공전함으로써 야기되는 광행차는 약 21"이며, 줄리안 데이트를 통해서 보정이 가능하며, 관성 좌표계에서 지구 저궤도 위성이 궤도운동을 함으로 야기되는 광행차 오차는 약 6" 이며, 궤도정보를 통해서 보정이 가능하다. 이를 보정하기 위해서, 보정 알고리즘을 구현하여 다목적 실용위성 자세제어계 성능해석 소프트웨어를 통해서 검증을 하였다.