• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.11
• /
• pp.1072-1078
• /
• 2008

An adaptive control algorithm for spacecraft rendezvous and docking in a Keplerian orbit is presented. The equations of relative motion of two spacecrafts expressed in a local-vertical-local-horizontal rectangular frame are converted to a general Hamiltonian form, then an adaptive control method developed for the uncertain Hamiltonian system is applied to the rendezvous and docking problem. A smooth projection algorithm is applied to keep the parameter estimates inside a singularity-free region, and a numerical example shows that the developed controller successfully deals with the unknown mass of the chaser spacecraft.

• Aerospace Engineering and Technology
• /
• v.7 no.2
• /
• pp.123-130
• /
• 2008

Flight safety analysis, which includes risk estimation for the various abnormal flight modes in addition to normal flight, has to be performed necessarily to guarantee launch safety for the operation of space launch vehicles. For this purpose, a dedicated system has been developed such that all the necessary repetitive computations, result reports, and graphical presentations can be performed inside a single system for user convenience. In addition, the developed system is capable of representing computed results on a three dimensional Earth for the realistic presentation. The developed Flight Safety Analysis System will be employed for the launch operation of Korea Satellite Launch Vehicle-I.

• Current Industrial and Technological Trends in Aerospace
• /
• v.5 no.1
• /
• pp.75-92
• /
• 2007

2002년 프론티어사업의 일환으로서, 10년간 1200억의 예산으로 미래형 신개념비행체 기술개발사업을 시작한 스마트무인기사업은, $2002{\sim}2003$년 수행한 개념연구를 통해 미래형 신개념 고속 수직이착륙 항공기 개념으로서 틸트로터 개념을 선정하고 이의 개발에 매진하고 있다. 사업단에서는 우선, 항공 선진국에서 지난 반세기 동안 시행한 다양한 비행체 개념연구결과에 대해 자체적인 비교 분석 및 국제공동 연구를 근간으로하여, 당시 틸트로터에 필적하는 가능성을 보였던 스탑트로터(보잉사), 복합자이로콥터(카터콥터사) 개념이 아닌, 틸트로터 비행체의 기술개발을 결정하게 되었다. 각각의 비행체 개념이 갖는 위험성과 도전성, 그리고 소요기술, 설계특성, 개발 위험도 등에 대한 면밀한 분석을 기초로 한 사업단의 체계적 의사결정은 주효했다. 스탑트로터개념은 비행시험의 잇단 실패와 지연/잠정 중단사태가 이어졌고, 복합자이로콥터 또한 잇단 비행사고로 2002년 기록한 148kts를 능가하는 고속성능 시현에 지금까지 실패함으로써, 실용화 가능한 고속수직이착륙기로서의 검증을 위해서는 해결해야할 기술적 과제가 많이 남아있음을 보여주고 있다. 반면, 틸트로터 개념의 경우 V-22의 설계 수정형에 대한 성공적인 비행시험완료 및 인증획득으로 전면양산승인이 2005년 결정되어 458대가 (미해병대(360), 해군(48), 공군(50)) 납품될 예정이고, 2010년 인증획득을 목표로 민수용으로 개발중인 BA609의 순조로운 비행시험진행, 무인기로 개발된 Eagle Eye 기술시현기의 비행 시험성공과 2003년 미 해양경찰청으로부터 Deep Water 프로그램의 장거리 순찰임무 주력기종 선정과 같이 군용, 상용, 무인용 고속 수직이착륙 시장의 전 방위적 진입이 현실화되고 있다. 이에 따라 항공업계의 반응은 2가지 방향으로 나뉘고 있다. 하나는 유럽의 ERICA 프로그램과 같이 틸트로터 기술 개발을 서두르자고 주장하는 방향이고, 다른 하나는 시콜스키의 X2 프로그램과 같이 틸트로터와는 차별화된 독자적인 고속 수 직이착륙 비행체 개념 개발을 시도하는 것이다. 이러한 배경으로 국내 독자적인 기술력으로 지난해까지 일구어낸 성공적인 스마트무인기 상세설계 종료 및 축소형 비행체 전환비행성공은 그 의의가 매우 크다고 할 수 있다. 본 논문은 틸트로터 개발사를 통해, 신개념 비행체 개발의 어려움과 교훈을 알아보고, 세계에서 2번째로 틸트로터 기술을 개발하고 있는 스마트무인기 사업의 현황과 기술적 특징 및 의의의 정리, 그리고 틸트로터의 대안으로 진행중인 새로운 고속 VTOL 비행체 연구현황에 대한 소개 와 간단한 기술적 평가를 포함시켰다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.9
• /
• pp.859-866
• /
• 2008

A guidance scheme for controlling the relative geometry of multiple flight vehicle formation flying is proposed. Each flight vehicle in the formation takes the roles of leader and follower simultaneously except for the formation leader. In this scheme, the flight commands for a leader are shared by all the followers and this leaders to a synchronized flight of all flight vehicles comprising the formation. Lyapunov stability theorem is used to obtain the guidance law. High fidelity nonlinear simulation results are presented to show the effectiveness of the proposed guidance law using a reconnaissance and surveillance mission example.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2016.07a
• /
• pp.29-32
• /
• 2016

본 논문에서는 나로호(KSLV-I) 비행상태의 실시간 감시를 목적으로 국내에서는 처음 개발된 우주센터 원격수신자료전시시스템(EDS)의 구축과 운용을 소개한다. EDS는 우주센터 발사통제시스템의 주요 시스템 중 하나이고 그 역할은 위성발사체의 비행에 중대한 영향을 주는 주요정보(QLM)와 궤적정보(TSPI)를 수신하여 실시간으로 처리함으로써 탑재 서브시스템별 전문가들이 위성발사체의 비행 상태를 감시할 수 있도록 지원하는 것이다. EDS는 3회에 걸친 나로호 비행시험에서 그 역할에 따라 매회 8대가 운영되었으며 임무를 성공적으로 수행하였다. 본 시스템을 기반으로 추후 발전된 형태의 한국형발사체(KSLV-II) 비행상태의 실시간 감시시스템의 구축이 가능할 것으로 예상된다.

• Current Industrial and Technological Trends in Aerospace
• /
• v.8 no.1
• /
• pp.86-95
• /
• 2010

Flight termination system(FTS) is used to terminate safely the launch vehicle's flight when it faces an emergency situation by transmitting termination command from ground FTS. RCC standard IRIG tone method has been used widely for FTS commands method in foreign ranges and Naro Space Center, but this method has a weakness for security of command signal. Therefore RCC had studied more secured EFTS standard and chose CPFSK digital modulation method. This paper describes basic concept and types of FTS and FTS types which foreign ranges had applied and describes standardization of EFTS in the U.S. based on RCC EFTS study reports.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.7
• /
• pp.685-692
• /
• 2009

This paper dealt with the development of the Framework for Multidisciplinary Design Optimization for the rotorcraft design concept and the building process of KHP(Korea Helicopter Project) - SDM(Simulation Data Management) system to manage various analysis data, which are used in the rotorcraft development phase. KHP-SDM RMDO(Rotorcraft Multidisciplinary Design Optimization) framework, which applied optimization modules of KHP-SDM and integrated the developed Multidisciplinary analysis modules, was constructed in the KHP-SDM. The results of the rotorcraft conceptual design using KHP-SDM RMDO showed that the framework was evaluated to be successfully constructed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.11
• /
• pp.902-910
• /
• 2018

This paper deals with spacecraft intercept problem on non-coplanar elliptical obit considering J2 perturbation. This disturbance addressed in this work is a major factor changing the trajectory of a spacecraft orbiting the Earth. To resolve this issue, a real-time intercept method is proposed. This method is based on the optimization problem which consist of the equation of motion considering spherical earth and impulse, and the optimal solution numerically obtained is set as the direction of the thrust of the interceptor. The position error is resolved by iteratively solving the optimization problem and modifying the direction of thrust of interceptor. The proposed method in this paper is verified by using various numerical examples.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.3
• /
• pp.280-287
• /
• 2010

The first Korean satellite launch vehicle, KSLV-I(Korea Space Launch Vehicle-I), was launched for its first flight test on Aug. 25, 2009 from Naro Space Center located in south Jolla province. Because launch vehicles usually fly long range with large amount of propellants aboard, preparation of countermeasures against potential malfunctions during flight is essential in launch operation. In this paper, the flight safety operation, prepared to guarantee flight safety during launch operation of KSLV-I, is presented. Prior to flight test, flight safety analysis is performed to estimate associated risk levels quantitatively, and during flight, flight safety systems are operated to cope with any risky situations. Real-time flight monitoring including computation of instantaneous impact point using tracking data is executed normally and the flight test is completed without activation of flight termination system.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.2
• /
• pp.63-71
• /
• 2003

This paper presents a robust slewing control of a flexible space structure based on sliding surface design. A sliding surface is designed for a single-axis rest-to-rest slewing in view of target angle, target angular velocity, and root monent of the flexible appendage. In comparison with the Lypunov control law, both controllers guarantee the stability and command tracking capabilities for nominal system. It is also shown that the designed control law provides further robustness to internal/external uncertainties. Extending the results of a single-axis maneuver, a sliding mode control law was sought for an arbitrary three-axis maneuver. Quaternion was used to determine the attitude of a space structure and sliding surfaces were designed for each axis, thereby a robust control law was derived considering the coupling effects between each rotational axis during the maneuver. Several numerical examples were demonstrated to show the effectiveness of the designed control law.