• Journal of Advanced Navigation Technology
• /
• v.23 no.3
• /
• pp.237-244
• /
• 2019

Since SBAS provides users with GNSS orbit, clock, and ionospheric corrections and integrity, the more precise positioning is possible. As the SBAS service area is expanded due to the development of the SBAS and the installation of the additional ground stations, there is a region where two or more SBAS messages can be received. However, the research on multi-constellation SBAS selection method has not carried out. In this study, we compared the result of positioning accuracy after applying the SBAS correction selected by using WAAS priority, EGNOS priority, or error covariance comparison method to LEO satellites in the regions where WAAS and EGNOS signals are transmitted simultaneously. When using WAAS priority method, 3D orbit error is smallest at 2.57 m. The covariance comparison method is outperform at the center of the overlap region far from each WAAS and EGNOS stations. In the eastern region near the EGNOS stations, the 3D orbit errors using EGNOS priority method is 8% smaller than the errors using the WAAS priority method.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.551-555
• /
• 2010

수생 생태계에서 하천 어류 서식 환경을 보호하고 유지하기 위해서는 어류의 적절한 서식 공간 확보가 선행되어야 하며, 하천정비사업에 따른 준설 시 하상변동으로 및 유속 변화로 인하여 발생하는 다양한 영향을 충분히 검토해야 한다. 본 연구에서는 우선 교각의 설치와 합류부위치로 인해 발생하는 모의 영역 내의 2차원 흐름거동을 RMA-2 모형으로 분석하였다. 또한 어류의 미시서식처를 고려한 최적의 영역에 대한 면적을 산정하였다. 이를 위해서 2차원 물리 서식처 모의 모형인 River2D를 적용하여 가중가용면적-유량 관계 곡선의 도출을 통해서 최적유량 산정시 중요한 지표인 WUA (Weighted Usable Area)의 산정결과를 어종별, 지역별 그리고 정비사업 전후에 대한 비교하였다. 적용구간은 낙동강 살리기 사업의 25공구(칠곡2, 구미 1지구: 약 8.74 km) 전체를 대상으로 하며 그중에서도 지류 합류부인 경암천부근 (제1지역)과 교각부근(제2지역)에서의 분석을 실시하였다. 피라미에 대한 WUA 값 산정결과 하천정비후에 정량적인 개선 효과를 확인하였으나 안정적인 수심 및 유속분포 지역의 개선을 위한 설계검토가 필요하다 할 수 있다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.4
• /
• pp.13-24
• /
• 2017

This paper presents a sequentially combined method of determining location conditions, the number of unmanned parcel service box and their optimal locations. First of all, block, accessibility and main public facilities are considered as location conditions and then set-covering model and p-median model are adopted for deciding the number of unmanned parcel service box and optimal locations, respectively. A case study for a region composed of small housings and multiplex housings in Ansan is conducted to prove the validation and application of the proposed method. The result indicates that 2 unmanned parcel service boxes are necessary in specific public places. The research contributes to resonable choice of unmanned parcel service boxes, crime reduction relevant to delivery man impersonation and economic benefit due to parcel service industry growth.

• International Journal of Highway Engineering
• /
• v.13 no.2
• /
• pp.95-102
• /
• 2011

Anti-icing system can immediately respond when snowing is expected or the snow comes down on the road surface. It has been recognized that the system can reduce traffic accidents and congestion by quickly removing the frozen road surface area. However, it is very difficult to implement this system due to the expensive equipment installation and operation cost, Recently, there was a developed program for predicting the freezing area using three-dimensional model and tracking the sun path. But, there is no objective analysis method and all developed approaches are different so that the general standard of anti-icing system is needed. In this study, we proposed the decision criteria for determining application priorities of the anti-icing system based on weather and road conditions, i.e., geometric and topographic conditions. Regional climate survey, topographical analysis, and dynamic vehicle simulation considered road geometry and skid resistance was conducted to standardize the installation method of anti-icing system.

• Journal of Korea Water Resources Association
• /
• v.52 no.12
• /
• pp.1011-1023
• /
• 2019

Rapid urbanization increases the risk of hydrologic disasters due to the increase of impervious areas in urban areas. Precipitation characteristics can be transformed due to the rise of global temperatures. Thus urban areas with the increased impervious areas are more exposed to hydrological disasters than ever before. Therefore, low impact development practices have been widely installed to rehabilitate the distorted hydrologic cycle in the urban area. This study used the Stormwater Management Model to analyze the water quantity and quality of the Mokgamcheon which had been severely urbanized, considering future climate scenarios presented by various general circulation models (GCMs). In addition the effectiveness of permeable pavement by 27 sub-watersheds was simulated in terms of water quantity and quality considering various GCMs and then the priorities of sub-watersheds were derived using an alternative valuation index which uses the pressure-state-response framework.

• Journal of Korean Society of Forest Science
• /
• v.83 no.2
• /
• pp.211-220
• /
• 1994

The critical need of forest road for enchanting the additional values of various forest products, in addition, giving more recreational opportunity to citizen, has been recognized. In this study the present author aimed to ascertain the most effective construction working plan of forest road being tit to Korean geographic condition. To execute this research program, four locations in national forest of Kangweon-do district and other four locations in private forest in Chollabuk-do district both where forest roads have previously been constructed were selected to analyze the effectiveness basing upon the various factors separately or in combination. The results are summarized as follows ; 1. The investment efficiency in forest road construction showed to increase in the area where terrain factors and district social factors rate is high, and to decrease in the area where forest status factors and forest road structure factors rate is high. So in future the Forest Resource Development Model of forest road should take more importance particularly on those area having terrain factor ratio is low. The extractable value of constructed forest road based on forest status factors rate is expected to increase in case of high considerably. 2. To construct of forest road for increasing multiple use of forests, forest road should be construct with priority on area where obtained total score by evaluation factors is high. And these evaluation factors should take possible determine the position of forest road construction. 3. The following five types of forest road basing upon function performance are suggested with regard to the place where road is constructed. (1) Forest Utilization Model ; where forest status factors and forest road structure factors rate are over 60%. (2) Forest Resource Development Model ; where terrain factors, forest status factors, forest road structure factors and district social factors rate are less than 60%. (3) Community Development Model ; where terrain factors, forest road structure factors and district social factors rate are over 60% but forest status factors rate are less than 60%. (4) Recreation and Health Model ; where terrain factors, forest status factors, forest road structure factors and district social factors rate are over 60%. (5) Multiple Use Model ; where both forest status factors and district social factors rate are over 60%.

• Journal of Korea Water Resources Association
• /
• v.42 no.7
• /
• pp.537-546
• /
• 2009

Determination of optimal pressure monitoring location is essential to manage water distribution system efficiently and safely. In this study, entropy theory is applied to overcome defects of previous researches about determining the optimal sensor location. The previous studies required the calibration using historical data, therefore, it was difficult to apply the proposed method in the place where the enough data were not available. Also, most researches have focused on the locations to minimize cost and maximize accuracy of the model, which is not appropriate for the purpose of maintenance of the water distribution system. The proposed method in this study quantify the entropy which is defined as the amount of information calculated from the pressure change due to the variation of discharge. When abnormal condition is occurred in a node, the effect on the entire network is presented by the entropy, and the emitter is used to reproduce actual pressure change pattern in EPANET. The optimal location to install pressure sensors in water distribution system is the nodes having the maximum information from other nodes. The looped and branched networks are evaluated using the proposed model. As a result, entropy theory provides general guideline to select the locations to install pressure sensors and the results can be used to help decision makers.

• The Korean Journal of Archival Studies
• /
• no.30
• /
• pp.125-174
• /
• 2011

Railway Station in Korea built for purpose to plunder resource and invade China 19 and 20 century early, It functioned as main transportation and important role in local history. However, Since the late 1990s, Railway Station in Korea is facing major changes due to Railroad Improvement and Restructuring plan. Photography is useful way to represent memory and local history about railway station, but Photography Documentation on railroad station were not discussed until now due to indifference of the KORAIL and peculiarities of national security facilities for a long time. This study suggest what is document activities and facilities of railway station, use value analysis about railway station's value firstly. next, this study set each documentation area with value analysis for a basis and present concrete example. finally, this study adapt documentation area and detail to classification scheme and apply activities and facilities of supplement or revision to classification scheme.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.2
• /
• pp.21-28
• /
• 2012

The continuous deployment of Urban Traffic Information System (UTIS) in Korea has increased the need for developing more practical applications utilizing the standard functions of UTIS facilities installed on urban arterials beyond its basic applications like gathering traffic data and providing traffic information. The UTIS-based bus signal priority may be one of UTIS-based applications meeting such demands. However, the studies on BSP have not been sufficient for actual field deployment in terms of theories and algorithms so that there have been few actual installations on real urban arterials. Thus, this study was aimed at developing a UTIS-based bus priority signal system and evaluating its effectiveness through a field study. To this end, this study presents the system development processes by dividing the UTIS-based bus priority signal system into hardware and software. In addition, the positive effectiveness of the UTIS-based bus priority signal system was verified through a field application test which was conducted at Gyeonggi Global Trade High School intersection.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.2
• /
• pp.58-71
• /
• 2021

The number of elderly people worldwide is rapidly increasing and the mobility handicapped suffering from inconvenient public transportation service is also increasing. In Korea and abroad, various policies are being implemented to provide high-quality transportation services for the mobility handicapped, and budget support and investment related to mobility facilities are being expanded. The mobility handicapped spends more time for transit transfer than normal users and their satisfaction with transit service is also lower. There exist transfer inconvenience points of the mobility handicapped due to various factors such as long transfer distances, absence of transportation facilities like elevators, escalators, etc. The purpose of this study is to find transfer inconvenience points for convenient transit transfer of the mobility handicapped using Smart card Big data. This study process traffic card transaction data and construct transfer travel data by user groups using smart card big data and analysis of the transfer characteristics for each user group ; normal, children, elderly, etc. Finally, find transfer inconveniences points by comparing transfer patterns between normal users and the mobility handicapped. This study is significant in that it can find transfer inconvenience points for convenient transit transfer of the mobility handicapped using Smart card Big data. In addition, it can be applicated of Smart card Big data for developing public transportation polices in the future. It is expected that the result of this study be used to improve the accessibility of transit transportation for mobility handicapped.