• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.3
• /
• pp.611-614
• /
• 2008

Urea-SCR system has been known so far as one of effective after treatments for the reduction of NOx. In order to achieve better performance in SCR system, optimal geometric conditions for a urea injection system should be achieved. This research focused to visualize spray characteristics of urea injected SCR system in a heavy duty diesel engine. The experiment was conducted by varying injection pressures and flow rates of urea. The flow visualization was made by photographing techniques of CCD camera.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.7
• /
• pp.531-540
• /
• 2009

In this study, thermo-gravimetric analysis(TGA) was used to investigate the effect of urea concentration and heating rate on the ammonia($NH_3$) formation process from urea solution. A newly designed pipe nozzle was inserted through a 1,000 N${\ss}$(C)/h oil firing boiler to compare the DeNOx efficiencies between the upward and downward nozzle. This experiment reveals the effect of path which an urea droplet goes through. Urea solution showed the same TGA graph without regard to the presence of oxygen. Heating rate had a great influence on the weight loss trend. But the concentration of urea solution between 10% and 40% did not affect so much the thermal decomposition temperature. Therefore, heating rate is more important factor on the thermal decomposition of urea than the concentration of urea solution. Three nozzles located at different positions showed similar DeNOx efficiencies such as 68.1%, 71.8%, 70.8% at the same temperature. Even though urea solution was injected for the same zone, the injection direction made much difference in DeNOx efficiency. A upward nozzle showed 68.1% and downward nozzle 9.5%. This results illustrate the importance of heating rate.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.42 no.3
• /
• pp.279-284
• /
• 2016

In this study, facial hair weakening ability of urea and anti-oxidants for shaving was investigated. The hair weakening ability and cross-section increase of hair depends on concentration of urea. The results showed that urea affects swelling of hair and this is related to the hair weakening ability. Anti-oxidants showed outstanding weakening ability despite of their low concentrations by breaking disulfide bond in facial hair. To evaluate the suitability of urea and anti-oxidants for facial cosmetic products, in vitro safety tests were proceeded. The results showed that urea and glutathione were safe for face. As a result, urea and glutathione were safe and outstanding as hair weakening agent for cosmetic shaving products.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.2
• /
• pp.177-182
• /
• 2015

The NOx emissions from diesel engines and industrial boilers are a major cause of environmental pollution. The selective catalytic reduction of urea is an aftertreatment technology that is widely used for the reduction of NOx emissions. The objective of this study was to investigate the characteristics of the thermal decomposition of a urea aqueous solution using laboratory-scale experimental equipment under conditions similar to those of marine diesel engines. A 40 wt. urea aqueous solution was used in this study. It was found that the total conversion rate varied with the inflow gas conditions and flow rates of the urea aqueous solution. In addition, there were conversion rate differences between NH3 and HNCO. At inflow gas temperature conditions of $210^{\circ}C$ and $250^{\circ}C$, the $NH_3$ conversion rate was found to be higher than that of the HNCO, depending on the residence time.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.4
• /
• pp.1128-1135
• /
• 2019

In this study, different types of polyether amines and H₁₂MDI were used to synthesize water dispersed urea resins, which can be applied to coating material on the concrete slabs for bicycle road using the ordinary application equipments. The concentrations of several polyether amines with different molecular weights and the number of amine functionality were varied to set up the optimal condition for water dispersed urea resin preparation with both an excellent tensile strength and an elongation. In addition, the effect of DMPA[2,2-Bis(hydroxymethyl)propanoic acid] concentration on the storage stability of the water dispersed urea resin was also investigated. The formation of urea bonds from isocyanate and polyether amines was confirmed through FT-IR ATR spectroscopy. From the mechanical properties of urea resins, PU-4 and PU-6, which were prepared with both diamines and triamine of different molecular weights and number of functionality, showed the tensile strength of 10.5 N/㎟ and 12.7 N/㎟, respectively and the elongation of 1165 % and 969%, respectively. Among the water dispersed urea resin synthesized with different contents of DMPA, PU-6 showed the highest mechanical properties, a tensile strength of 14.2 N/㎟ and an elongation of 993%. In addition, the water dispersion state of this PU-6 was the most stable even after 8 weeks.

• Applied Chemistry for Engineering
• /
• v.21 no.2
• /
• pp.211-216
• /
• 2010

$(NH_4)_{0.3}V_2O_5$ nanorods and $V_2O_5$ nanosheets have been synthesized by the reaction of $V_2O_5$ gel via homogeneous precipitation process employing urea and formic acid. The electrochemical and chemical characteristics of these nanomaterials have been investigated using TGA, SEM, FT-IR, XRD, and LSV. The interlayer distance of $(NH_4)_{0.3}V_2O_5$ was about $10.7{\AA}$, and that of $V_2O_5$ synthesized by using formic acid was $14.2{\AA}$. The surface morphology of $(NH_4)_{0.3}V_2O_5$ and $V_2O_5$ showed features that looked like nanorods and nanosheets, respectively. Specific capacity of $(NH_4)_{0.3}V_2O_5$ nanorods prepared at $95^{\circ}C$ was at least 280 mAh/g at 10 mA/g discharge rate.

• Proceedings of the KAIS Fall Conference
• /
• 2011.12b
• /
• pp.402-405
• /
• 2011

디젤엔진에서 발생되는 PM과 $NO_X$는 강화되는 배기규제의 주요 저감대상으로서 이의 저감을 위한 다양한 후처리장치가 개발되고 있다. 이중 Urea-SCR은 $NO_X$의 전환율이 높고 연비에 미치는 영향이 작기 때문에 $NO_X$저감을 위한 최선의 장치로 인식되고 있다. 하지만, 우레아 수용액의 물성치 특성으로 인하여 동절기 $-20^{\circ}C$이하로 내려가는 지역에서 동결되는 문제점을 해결해야한다. 따라서 이러한 우레아 저장탱크에 해동 시스템을 적용하여 시동초기 우레아를 적정 시간내에 안정적으로 공급가능한 기술의 확보가 필요하다. 본 연구에서는 요소수 저장탱크 내부에 냉각수 순환 가열방식(CH)과 전기 가열방식(EH)을 이용하여 동결된 요소수의 해동현상에 대한 3차원 비정상상태 수치 해석을 수행하였다. 이를 통하여 해동 과정 중 나타난 액상분율, 온도영역 그리고 자연대류를 분석하여 각 가열 방식에 대한 해동특성을 비교하였으며 순수 갈륨 융해 실험 결과값과 수치 해석 결과값를 통하여 수치 해석 방법을 검증하였다. 결론적으로 1,000ml의 우레아 수용액이 확보되기까지의 시간은 CH의 경우, 275s, 그리고 EH의 경우, 230s임을 알 수 있었다.

• Journal of the Korean Chemical Society
• /
• v.54 no.1
• /
• pp.88-92
• /
• 2010

Isopropyl mercaptan is an important pharmaceutical intermediate and chemical material. And thiourea and triglycol are the main materials for the synthesis of isopropyl mercaptan. Therefore the dissolution of thiourea in triglycol solution is very important for the production of isopropyl mercaptan. The aims of this study are to examine the dissolution kinetics of thiourea in triglycol solution, and to present an alternative process for producing isopropyl mercaptan. In order to investigate the dissolution kinetics of thiourea in triglycol solution, the concentrations of solution and reaction temperature were selected as experimental parameters. It was determined that the dissolution rate of thiourea increased with the increase in solution concentration and temperature. An empirical equation was used in fitting the data. Statistical analysis indicated small errors and the results should be reliable.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.11a
• /
• pp.168-169
• /
• 2013

In this study, the chemical resistance of polyurea resin waterproofing and anti-corrosion materials that is applied to the social infrastructure was analyzed. The result in this study will be utilizing as a basic data for establishing the quality standards which are able to judge the chemically resistant characteristic of polyurea resin waterproofing and anti-corrosion materials.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2001.11a
• /
• pp.67-70
• /
• 2001