• Resources Recycling
• /
• v.26 no.1
• /
• pp.30-36
• /
• 2017

Leaching experiments of anode slime were performed with several inorganic acids (HCl, $HNO_3$ and $H_2SO_4$) together with thiourea and thiosulfate solution to recover gold and silver. Gold was not dissolved at all into these inorganic acids in the absence of any oxidizing agents. At the same concentration of inorganic acid, the leaching of percentage of Ag was the highest in the sulfuric acid solution. The leaching percentage of silver increased with the increase of HCl concentration owing to the formation of $AgCl_2{^-}$. Copper, nickel and zinc except tin was almost dissolved in these inorganic acids but no tin was dissolved in nitric acid solution. Most of Au and Ag were dissolved into the mixture of sulfuric acid and thiourea solution. Thiosulfate could dissolve some silver from the anode slime but no gold was dissolved by this agent.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.10 no.1
• /
• pp.13-19
• /
• 2012

The long-lived fission products $^{79}Se$ and $^{99}Tc$ have been considered as the major concern nuclides for the disposal of radioactive waste because of their high solubilities and the existence of anionic species in natural water. In this study, the solubilities of $FeSe_2(s)$ and $TcO_2(s)$, known as respective Solubility Limiting Solid Phase (SLSP) of selenium and technetium, were measured in the KURT (KAERI Underground Research Tunnel) groundwater under various pH and redox conditions. And their solubilities and major species were also calculated using geochemical codes under conditions similar to experimental solutions. Experimental results and calculation for $FeSe_2$ show that the solubility of selenium was found to be below $1{\times}10^{-6}mol/L$ under the condition of pH 8~9.5 and Eh=-0.3~-0.4 V while the dominant species was identified as $HSe^-$. For $TcO_2$, the solubility of technetium was found to be $5{\times}10^{-8}{\sim}1{\times}10^{-9}mol/L$ in the solutions of pH 6~9.5 and Eh<-0.1 V, while the dominant species was $TcO(OH)_2$. However, when the Eh of the solution is -0.35 V, $TcO(OH)_3^-$ and $TcO_4^-$ are calculated as the dominant species at pH 10.5~12 and pH>12, respectively.

• Journal of Korea Soil Environment Society
• /
• v.5 no.1
• /
• pp.65-73
• /
• 2000

Surfactants have been extensively considered for decontamination of the subsurface polluted with hydrophobic organic compounds. In order to investigate the effect of molecular structures on the solubilization of hydrophobic organic compounds, solubility enhancement of two PAHs in solutions of three different surfactants-conventional, dianionic, and gemini. The batch experimental results showed that the gemini was the most effective and the dianionic was the least, indicating that organic carbon content of the surfactants was the major factor which determines the sorption capacity of surfactant aggregates in water, unlike some of the previous reports.

• Journal of the Korean Chemical Society
• /
• v.53 no.4
• /
• pp.453-465
• /
• 2009

In this study, the descriptions of salt solubility in the textbooks of secondary school and college were reviewed to figure out the reason of low understanding of elementary and secondary school students and teachers about the solubility of a salt in the presence of other ions. The ionic strength dependence of salt solubility was not introduced in the secondary school textbooks and general chemistry textbooks. It appeared in the physical chemistry textbooks as a direct or an indirect explanation. However, most of college senior students who had learned the physical chemistry could not relate the salt solubility with the ionic strength change. The factors might affect salt solubility, such as the ion pair formation and the activity coefficient change by ionic strength, were mentioned and an experimental result was also shown to resolve the questions that college students and teachers might have. Because these explanations are beyond the secondary school level, we need to develope an easier and better explanation suitable for the secondary school students.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.16 no.1
• /
• pp.46-52
• /
• 2008

Oils and chlorinated solvents leaking to the subsurface are entrapped in the soil pore and these are called as nonaqueous phase liquids (NAPL). NAPL entrapped in porous media acts as a continuous source for surface and ground water contamination. This study visualized dissolution of trichloroethylene (TCE) entrapped in porous media and quantified the velocity of TCE dissolution using an image analysis technique. As the water velocity increased, the level of dissolution increased. The results imply that a TCE contaminated region having a high infiltration rate and groundwater velocity may result in severe groundwater contamination. Microscopic images of TCE entrapped in porous media showed that TCE present in the preferential flow paths was easily dissoluted into the water phase. However, TCE present in the stagnant flow region was visualized for long time. The results imply that TCE would be still present in the soil if TCE is detected in goundwater.

• Journal of the Mineralogical Society of Korea
• /
• v.26 no.2
• /
• pp.119-127
• /
• 2013

Borosilicate glass dissolution is an important chemical process that impacts the glass durability as nuclear waste form that may be used for high-level radioactive waste disposal. Experiments reported that the glass dissolution rates are strongly dependent on the bulk composition. Because some relationship exists between glass composition and molecular-structure distribution (e.g., non-bridging oxygen content of $SiO_4$ unit and averaged coordination number of B), the composition-dependent dissolution rates are attributed to the bulk structural changes corresponding to the compositional variation. We examined Na borosilicate glass structures by performing classical molecular dynamics (MD) simulations for four different chemical compositions ($xNa_2O{\cdot}B_2O_3{\cdot}ySiO_2$). Our MD simulations demonstrate that glass surfaces have significantly different chemical compositions and structures from the bulk glasses. Because glass surfaces forming an interface with solution are most likely the first dissolution-reaction occurring areas, the current MD result simply that composition-dependent glass dissolution behaviors should be understood by surface structural change upon the chemical composition change.

• Economic and Environmental Geology
• /
• v.45 no.2
• /
• pp.89-104
• /
• 2012

The solubility of aluminum for two Andisol profiles formed on pyroclastic materials and basaltic rocks from Jeju Island, Korea was investigated. It is found that high organic carbon content and $Al_{pyrophosphate}/Al_{oxalate}$ ratios in the A horizons, suggesting the substantial amounts of reactive Al are associated with organic matter, whereas the low organic carbon content and the $Al_{pyrophosphate}/Al_{oxalate}$ ratios in the Bo horizons indicate that a major part of the reactive Al should be bound inorganically. The differential FT-IR spectra following acid-oxalate dissolution and heating up to 150 and $350^{\circ}C$, and transmission electron microscope (TEM) observation confirm that imogolite is in the Bo horizon. Our results of equilibration experiments demonstrate that the Al solubility in the Bo horizon for Andisols can be clarified by the congruent dissolution model for imogolite-type material (ITM), rather than by the simultaneous equilibrium with both ITM and Al hydroxy-interlayered aluminosilicate. With results from dialysis and aging procedures, it is noted that the formation of a proto imogolite sol showing its transformation to imogolite, which supports the congruent dissolution of ITM primarily controlling the Al solubility of Andisols in Jeju Island, Korea.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.14 no.4
• /
• pp.401-408
• /
• 1985

The yeast cell wall lytic action of the alkaline AL-protease, which was found out of the crude Zymolyase that a kind of yeast cell wall lytic $endo-{\beta}-1$, 3-glucanase produced from Arthrobacter luteus, was investigated with the viable cells of S. sake and it's cell wall preparation. AL-protease on the lysis of the viable yeast cells showed very low activities with the alone, but the lytic activities were highly increased with the combination of AL-protease and Zymolyase. On the stepwise treatment of the viable yeast cells with AL-protease and Zymolyase, the cells were lysed highly only by the course having a treatment with Zymolyase after pretreatment with AL-protease. Thus synergistic action of AL-protease was not observed with any some commercial enzymes, known as a type of alkaline and serine protease such as AL-protease, and was also found to be affected greatly by the culture conditions and species of the yeast tested. AL-protease caused the release of some peptide and a lot of sugar from the cell wall preparation, but could not lysed the cell wall more than 66%. Whereas Zymolyase could lysed the cell walls almost completely with alone. On the basis of these results, the synergistic action of AL-protease on the lysis of S. sake cells is hypothesized that at first AL-protease bind to the yeast cell surface layer consisting of mannan and protein, and then changes their conformation to facilitate the penetration of Zymolyase from the outside to the inside framework layer constituted of alkali insoluble ${\beta}-1,\;3-glucan$.

• Proceedings of the KAIS Fall Conference
• /
• 2002.05a
• /
• pp.264-266
• /
• 2002

원자력 발전소의 2차계통수에는 pH를 조절하여 부식을 억제하기 위해 pH제어제로 약염기성 화학물질을 첨가하고 있다. pH 제어제로 암모니아를 사용하였으나 pH가 낮아 부식생성물이 생성되어 증기발생기의 전열관에 슬러지의 퇴적으로 전열관의 부식이 촉진되므로 pH 제어제를 에탄올아민으로 바꿈으로 슬러지의 생성 및 이동을 억제하고 있다. 그러나 에탄올아민은 암모니아와 물리화학적 성질이 다르므로, 증기발생기에 유입되는 부식생성물의 용해와 흡착, 이온성 불순물의 잠복현상에 미치는 영향이 다르다. 본 연구는 암모니아와 에탄올아민이 온도가 점차 높아짐에 따라 부식생성물에 대찬 용해와 흡착, 이온성불순물의 잠복현상에 미치는 영향을 조사하였다. 이 실험의 결과로 2차 계통수의 pH 제어제는 ETA가 암모니아보다 증기발생기 슬러지의 철산화물에 더 흡착되어 더 많이 용해되어 퇴적된 슬러지 양을 감소시키므로, 슬러지에 흡착된 불순물의 양을 감소시저 잠복 현상을 억제할 것으로 조사되었다.

• Korean Journal of Microbiology
• /
• v.19 no.3
• /
• pp.103-107
• /
• 1981

Increasing the concentration of the nonionic surfactants the solubility of methyl paraben was increased. This is called the solubilization phenomenon and caused inactivation of the preservatives used. The MICs(minimum inhibitory concentrations) on E. coli were increased at the same time. So the relation between the solubility and the mic could be expressed as $S-S_0=R^{\prime}/R^{\prime\prime}\;(M-M_0)$ and in this case $R^{\prime}/R^{\prime\prime}$ was about 2.