• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05a
• /
• pp.357-362
• /
• 1998

PWR 정지시 일차계통 수화학 제어의 주요대상은 계통표면에 침적된 부식생성물의 주성분인 비화학양론적 니켈(코발트)페라이트로서, 산성-환원 단계에서 용존수소에 의해 Ni$^{\circ}$ (또는 Co$^{\circ}$)로 환원되고 산성-산화 단계에서 용존산소에 의해 Ni$^{2+}$ (또는 CO$^{2+}$)로 산화되어 이온교환기에 의해 제거된다 본 연구에서는, 니켈 및 코발트 산화물의 25~300 $^{\circ}C$ 환원 또는 산화반응 시 표준자유에너지의 변화 및 용존수소 또는 용존산소의 요구농도를 계산하여, 원자로 정지시 일차계통수 용존 기체의 제어조건을 고찰하였다. 산성-환원 단계의 냉각재 온도인 300~82$^{\circ}C$ 범위에서 용존수소가 충분할 경우 열역학적으로 $^{58}$ Co(또는 $^{60}$Co)Fe$_2$O$_4$$\longrightarrow$Co의 역반응이 억제되므로서 노심외 계통부위 침적이 감소될 수 있기 때문에, 용존수소를 온도에 따라 요구농도 곡선 위로 약간 높게 유지하는 것보다 25~50 cc/kg-$H_2O$로 유지하는 방식이 바람직한 반면, 용존산소를 제공하는 과산화수소 농도가) 2.7 ppm일 때 NiFe$_2$O$_4$$\longrightarrow$Ni$_2$O$_4$(+$\alpha$-Fe$_2$O$_3$) 반응이 일어날 수 있기 때문에, 산성-산화 단계에서는 과산화수소의 냉각재 농도를 이보다 낮게 유지하는 것이 바람직하다.

• Journal of the Korean Electrochemical Society
• /
• v.7 no.1
• /
• pp.21-25
• /
• 2004

The electrochemical behaviors of dissolved hydrogen and hydrogen peroxide at a platinum disk electrode were investigated in boric acid solution by potentiostatic polarization method at the temperature of 25 and $200^{\circ}C$. The oxidation of dissolved hydrogen at $25^{\circ}C$ was kinetically controlled reaction, the rate of which depends upon the electron transfer on the electrode surface. As temperature was raised, however, the electrochemical characteristics of dissolved hydrogen were changed from a kinetically controlled reaction to a diffusion controlled one. One notable feature, with dissolved hydrogen at high temperature, is that an abnormal potential range was observed, where the oxidation rate of dissolved hydrogen rapidly decreased just before starting potential of water oxidation. We think it is caused by the deactivation of the electrode that results from the adsorption of hydroxyl ion on the surface of the platinum disk. On the contrary, a definite change with temperature was not identified in the case of the hydrogen peroxide except for the increase in current density that was due to the increasing diffusion coefcient with an increase of temperature.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.10a
• /
• pp.357-362
• /
• 1997

PWR 원전 계획 예방정비 기간 중에는 Crud 제거를 위한 정지화학 제어가 수행되고 있으나, 불시정지시 화학제어에 대한 접근은 거의 전무하다. 이에, 정지시 냉각재화학 변화에 따른 Nickel Ferrite의 안정성에 대해 검토하고, 불시정지시 냉각재 화학제어의 방향을 도출하였다. 계획정지 화학제어가 가능한 불시정지시에는 Nickel Ferrite 용출 증대를 위한 조기 붕산화와 고농도 용존수소 (Fig. 1 참조) 유지 및 산성-산화 단계의 도입이, 적용이 불가능한 경우에는 Nickel Ferrite 용출 억제를 위한 붕산화 연기 및 용존수소의 저농도 유지가 타당할 것이다.

• Journal of Digital Convergence
• /
• v.14 no.9
• /
• pp.281-286
• /
• 2016

In this paper, we optimized the structure of hydrogen water generator and assessed by developing a generator with dissolved hydrogen amount(1,000~1,200 ppb) of world-class level. Evaluation is divided into four types, such as dissolved hydrogen amount, pH, maximum pressure, redox potential, and it was evaluated for each of the targets. It was performed through the experiment of four in all five times and all of them show superiority results appearing in the target range. In addition, the assessment got 25/30 functionality, 17/20 maintainability, 26/30 usability, and 19/20 efficiency. In particular, we proved the validity of this study in high efficiency. We developed this hydrogen water generator system as possible to be substitution of water purifier.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2002.10a
• /
• pp.314-314
• /
• 2002

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.11a
• /
• pp.140-144
• /
• 1996

Trickle bed를 이용하여 고분가 촉매에 의한 용존산소 제거반응을 수행하였다. 고분자 촉매는 폴리스티렌-디비닐 벤젠의 공중합체로 이루어진 담체를 제조하여 백금 용액을 함침시킨 후 수소로 환원하여 제조하였다. trickle bed는 수소 및 산소로 포화되어 있는 물을 향류식으로 접촉할 수 있도록 설계하였다. 이 경우는 액상 실험 장치와 달리 포화기가 없기 때문에 장치는 비교적 단순하였으나 컬럼내에 축적되는 액상의 축적이 중요한 운전변수로 나타났다. trickle bed에서의 용존산소 제거 거동을 semi-empirical relation으로 나타내어 실험치와 비교한 결과 예측된 모델과 매우 잘 일치하는 것으로 나타났다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2003.10a
• /
• pp.291.2-291.2
• /
• 2003

• Journal of Sensor Science and Technology
• /
• v.6 no.3
• /
• pp.221-227
• /
• 1997

The Pd/NiCr gate MISFET-type sensors were fabricated for detecting hydrogen dissolved in high-capacivity transformer oil. To improve stability and high concentration sensitivity of the sensor, Pd/NiCr double catalysis metal gate was used. To reduce the serious gate voltage drift of the sensor induced by hydrogen, the gate insulators of 2 FETs were constructed with double layer of silicon dioxide and silicon nitride. The hydrogen sensitivity of the Pd/NiCr gate MISFET is about a half of Pd/Pt gate MISFET's sensitivity but the Pd/NiCr gate MISFET has good stability and high concentration detectivity up to 1000 ppm.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.28 no.5
• /
• pp.549-556
• /
• 1995

Experiments were carried out to examine the combined effects of hypoxia and hydrogen sulfide on survival, feeding activity and metabolic rata or Blue crab, Portunus trituberculatus. Survival rate of the crab was significantly affected by $\leq2.14mg/l$ dissolved oxygen, and feeding activity was also reduced below 1.41mg/l dissolved oxygen. Metabolic rate of the crab exosed to hypoxia $(\leq3.35mg/l)$ was significantly reduced than that exposed to normoxia. The combined effects of hypoxia $(\leq1.86mg/l)$ and hydrogen sulfide $(12.35 {\mu}g/l)$ on the survival rate were highly toxic than each single effect. Feeding activity was also decreased by the combinedexposure to $\leq1.86mg/l$ dissolved oxygen and $(12.35 {\mu}g/l)$ hydrogen sulfide compared with single effect.

• Journal of Sensor Science and Technology
• /
• v.10 no.4
• /
• pp.259-265
• /
• 2001

FET-type dissolved oxygen sensor has the Pt working electrode around the pH-ISFET. Appling a voltage to the working electrode, the hydrogen ion which is proportional to the dissolved oxygen concentration occurs around the pH sensing gate and we can measure the dissolved oxygen concentration by detecting pH concentration through the pH-ISFET. In this paper, a dissolved oxygen measurement system using FET-type dissolved oxygen sensor array which adopt a specific algorithm to enhance the reliability has been developed and we compared its performance with the commercial dissolved oxygen measurement system.