• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.41.2-41.2
• /
• 2009

최근 자동차 시장에서는 레이저 열처리에 대한 관심이 집중되고 있다. 이는 현재까지 사용되어 왔던 점용접에 비해 이음부 형상에 제한이 적고 자유도가 높으며 짧은 시간내에 용접을 마쳐 열변형의 문제가 적기 때문이다. 이러한 이점 때문에 자동차 시장의 기술개발 동향이 차체 부품의 경량화와 원가절감을 위한 신기술 개발로 레이저 가공 기술을 접목시키고 있으며 이러한 신공정 개발은 지속적으로 확대되어 가고 있는 추세이다. 본 실험에서는 차체 접합을 위하여 신기술로 대두 되고 있는 레이저 용접법으로 박판을 접합하였다. 실험 조건은 동일한 재료 두 판을 합쳐 전력량을 변화시켰으며, 전력량의 한 조건을 잡아 용접 속도에 변화를 주었다. 용접 샘플의 물성을 평가하기 위하여 제품 내부의 구조를 비파괴 시험법을 통하여 분석하여 내부적 결함 및 내부 구조를 관찰하고, 열영향부 및 용접부 내부의 조직을 관찰하여 신기술에 대해 재료적 물성을 평가하고자 한다. 평가방법은 산업용 단층 촬영기(CT X-RAY)를 이용하여 재료를 파괴하지 않고 용접상태에 따른 내부구조를 분석하였으며, 용접부, 열영향부 그리고 모재 부분에 대해 경도를 측정하여 용접조건에 따른 경도양상을 관찰하였다. 또한 부위별로 조직을 관찰하여 재료 내부의 상을 관찰하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.1
• /
• pp.201-210
• /
• 1994

A theoretical heat-flow model incorporating with a constant moving CO$_{2}$ laser beam has been analyzed to predict depth and the shape of bead section during last beam welding. The laser beam is exponentially attenuated with an abosrption coefficient in the material. The solution can be expressed in terms of normalized variables. The experimental data were generated by usint CW 2 CO$_{2}$ laser with multi beam mode and CW 3 kW CO$_{2}$laser with Gaussian mode. The specimens were made as bead-on-plate welds for SM 10C, STS 304, STS 316, STS 420 and pure Nickel. The maximum possible penetration depth and the shape of beas section for given sources of laser power, travel speed and beam spot size can be prdicted with this model in a given material.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.1
• /
• pp.150-157
• /
• 1997

Uniform weld pool shape is important in determining the weld quality. And weld pool width is one of the most dominant factors of the seld pool shape. In order to control the weld pool width, the fuzzy logic controller, which is well adapted to the complicated nonlinear systems such as welding, was used in this study. The weld pool image was obtained through CCD camera, and the weld pool width was calculated by processing the image. Uaing the calculated width, welding speed, as a control input, was inferred by the fuzzy logic controller. An uniform weld pool width can be successfully obtained regardless of the disturbances in the system.

• Journal of Korean Society of Steel Construction
• /
• v.11 no.4 s.41
• /
• pp.339-350
• /
• 1999

In this study, blowholes, a kind of solid defects, were intentionally introduced in transverse butt-welded joints which are widely used for the connection of main members in steel structures to evaluate the fatigue characteristics of these joints with blowholes according to the difference of the size and shape of blowholes, and a series of tests were performed. Static test results proved that the static strength of these joints with blowholes was not affected by their size and shape. From the fatigue test results on these joints with blowholes, the size and shape of blowholes inside the weld metals were strongly affected in fatigue strength, and we suggested the relationship between fatigue strength and their size and shape quantitatively. Also, Using the relationship of fatigue crack growth rate and stress intensity factor range, the fatigue life of transverse butt-welded joints with blowholes can be estimated properly.

• Journal of Welding and Joining
• /
• v.15 no.2
• /
• pp.54-63
• /
• 1997

For the purpose of establishing laser welding condition (laser power, welding speed and beam focus) and of evaluating tailored blanks for two kinds of thin steel sheets SPCC and SK5M using in the thin plate structure such as automobile, train, and so on, investigated their $CO^2$ laser weldability under various initial welding conditions. SPCC thin sheet showed good weldability under some welding conditions. But, high carbon steel sheet SK5M needed heat treatment after welding to obtain ductility of the welded joint. And next, tailored blank was tested through deep drawing to evaluate reliability of their obtained laser welding conditions. The forming depths by tailored blank were SPCC+SPCC=22-25mm and SK5M+SK5M=13-25mm.

• Proceedings of the KWS Conference
• /
• 2006.10a
• /
• pp.117-119
• /
• 2006

• Proceedings of the KWS Conference
• /
• 2003.11a
• /
• pp.69-71
• /
• 2003

• Proceedings of the KWS Conference
• /
• 2004.05a
• /
• pp.36-38
• /
• 2004

연연속 압연이란 1980년대에 열연제품의 생산성 향상을 위하여 도입된 개념으로서 조압연(rough rolling)이 끝난 판재를 서로 접합하여 연속적으로 사상압연(finish rolling)하는 방법을 말한다. (중략)

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.23 no.2
• /
• pp.61-65
• /
• 1987

In this study, the characteristics of TRC (tensile restraint crack) critical stress in the gravity type underwater wet welding process and in the in-air welding have been investigated for Y, y and 45$^{\circ}$r grooves using the KR Grade A-3 steel plates and the E4303 covered electrodes. The following results were obtained: (1) In the TRC tests, the initial critical stress of Y groove is higher than those of the 45$^{\circ}$r single bebel grooves in both in-air and underwater weldings, and the cold fracture sensitivity is higher in the underwater welding than in the in-air welding. (2) The hardness of underwater weld metal is the highest in heat affected zone is about Hk 365 in the in-air weld but Hk 670 in the underwater weld which is higher for cooling speed is more rapid, resulting in the lower critical stress by increase of fracture sensitivity. (3) The diffusible hydrogen quantity for 48 hours is about 18cc/100g-weld-metal in the in-air welding but 48cc/100g-weld-metal in the underwater welding. So that, in the case of underwater welding the diffusible hydrogen penetrates about 3 times more than that in the in-air welding.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.23 no.2
• /
• pp.15-15
• /
• 1987

In this study, the characteristics of TRC (tensile restraint crack) critical stress in the gravity type underwater wet welding process and in the in-air welding have been investigated for Y, y and 45°r grooves using the KR Grade A-3 steel plates and the E4303 covered electrodes. The following results were obtained: (1) In the TRC tests, the initial critical stress of Y groove is higher than those of the 45°r single bebel grooves in both in-air and underwater weldings, and the cold fracture sensitivity is higher in the underwater welding than in the in-air welding. (2) The hardness of underwater weld metal is the highest in heat affected zone is about Hk 365 in the in-air weld but Hk 670 in the underwater weld which is higher for cooling speed is more rapid, resulting in the lower critical stress by increase of fracture sensitivity. (3) The diffusible hydrogen quantity for 48 hours is about 18cc/100g-weld-metal in the in-air welding but 48cc/100g-weld-metal in the underwater welding. So that, in the case of underwater welding the diffusible hydrogen penetrates about 3 times more than that in the in-air welding.