• 한국산학기술학회논문지
• /
• 제21권2호
• /
• pp.535-541
• /
• 2020

FCAW는 모든 자세에서 용접이 가능하고 작업여건 변수가 많은 현장에서 우수한 품질을 얻을 수 있는 장점이 있어 탄소강과 합금강의 중판, 후판 용접에 많이 사용되고 있다. 최근 국내에서 진행한 연구논문의 대부분이 피로 강도 평가 방법 연구, 잔류응력 및 변형, 필릿 용접 공정 개발 등의 연구가 시행되었으나 필릿 용접을 대상으로 경도, 매크로, 자분탐상 결과를 토대로 하여 기계적 특성을 나타낸 연구가 부족함에 따라 본 연구에서는 FCAW를 이용하여 상부는 SS400(일반구조용 압연강재) 후판은 SM490A(용접구조용 압연강재)를 이용하여 필릿 용접 후 경도시험, 매크로 시험, 자분탐상시험을 통해 아래와 같은 결론을 도출하였다. 경도시험 결과, 모든 결과 값이 KS B 0893의 규격치 350Hv보다 낮게 나타나 양호한 것으로 판단되었고, 매크로 시험 결과 용접부의 형상별로 균일한 조직 상태를 나타냈으며, 용접부 전 단면에 걸쳐 내부 결함, 기포 또는 불순물 등이 발견되지 않아 lamination의 우려가 없었으며, 자분탐상검사 결과 별도의 문제점이 발견되지 않았다.

• Journal of Welding and Joining
• /
• 제26권2호
• /
• pp.62-68
• /
• 2008

Effects of gravitational orientation on gas tungsten arc welding (GTAW) for 304 stainless steel were studied to determine the critical factors for weld pool formation, such as weld surface deformation and weld pool shape. This study was accomplished through an analytical study of weld pool stability as a function of primary welding parameters (arc current and arc holding time), material properties (surface tension and density), and melting efficiency (cross-sectional area). The stability of weld pool shape and weld surface deformation was confirmed experimentally by changing the welding position. The arc current and translational velocity were the major factors in determining the weld pool stability as a function of the gravitational orientation. A 200A spot GTAW showed a significant variation of the weld pool formation as the arc held longer than 3 seconds, however the weld pool shape and surface morphology for a 165A spot GTAW were 'stable', i.e., constant regardless of the gravitational orientation. The cross-sectional area of the weld (CSA) was one of the critical factors in determining the weld pool stability. The measured CSA ($13.5mm^2$) for the 200A spot GTAW showed a good agreement with the calculated CSA ($14.9mm^2$).

• Journal of Welding and Joining
• /
• 제32권1호
• /
• pp.53-60
• /
• 2014

The automatic arc welding is generally accepted as the preferred joining technique and commonly chosen for assembly of large metal structures such as in areas of automotive, aircraft and shipbuilding due to its joint strength, reliability, and low cost compared to other joint processes. Recently, several mathematical models have been developed and studied for control and monitoring welding quality, productivity, microstructure and weld properties in arc welding processes. This study indicates the prediction of process parameters for the expected welding quality with accordance to the adaptive GTA welding process. Furthermore, the mathematical models is also develop to aid the selection of an optimal welding process as the generation of process controls to predict the bead geometry as a function output parameters in the GTA welding process. The developed models through this study showed comparatively excellent predicted results, and will extend to other welding processes to integrate an optimized system for the robotic welding process.

• Journal of Welding and Joining
• /
• 제33권5호
• /
• pp.47-52
• /
• 2015

In this study, it was tried to analyze the effects of welding parameters on the weld penetration and aspect ratio when a STS316L pipe was welded in a horizontal position by GTAW. Experiments were systematically designed using a L18 orthogonal array, and the effects of welding parameters were statistically analyzed by ANOVA(Analysis of Variance). The shielding gas type has the largest effect on both the penetration and aspect ratio. The welding current type and shielding gas flow rate have a little effect on the penetration, whereas the electrode tip angle has a little effect on the aspect ratio. When welded at a selected welding condition, which is composed of He shielding gas, pulse current of 300/45 A, electrode tip angle of 90o, and shielding gas flow rate of 30 l/min, the estimated interval at least 95 % confidence was $1.99{\pm}0.18mm$ for the penetration and $0.31{\pm}0.04$ for the aspect ratio. From the confirmation experiments, the average penetration and aspect ratio were well agreed with the estimation as 1.96 mm and 0.30, respectively. Additionally, the effects of the welding speed and welding current on the penetration and aspect ratio were experimented and analyzed by linear regression. The penetration was linearly increased with the decrease of the welding speed and with the increase of the welding current, but the aspect ratio showed a tendency to a little decrease with the increase of both the welding speed and current.

• 한국정밀공학회지
• /
• 제17권10호
• /
• pp.141-146
• /
• 2000

We introduce the algorithms of 3-D position estimation using a laser sensor for automatic die remodeling. First, a vision sensor based on the optical triangulation was used to collect the range data of die surface. Second, line vector equations were constructed by the measured range data, and an analytic algorithm was proposed for recognizing the die location with these vector equations. This algorithm could make the transformation matrix without any specific corresponding points. To ascertain this algorithm, folded SUS plate was measured by the laser vision sensor attached to a 3-axis cartesian manipulator and the transformation matrix was calculated.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.36-40
• /
• 1987

현재 사용되고 있는 작업방식은 로봇과 positioner의 상대적인 위치 및 자세설정에 의하여 작업효율 및 성능향상을 꾀할 수 있음에도 불구하고 비효율적인 방법으로 사용하고 있는 실정이다. 이러한 문제점을 해결하기 위한 방법중의 하나로 로보트와 positioner시스템을 하나의 기구학적 모델로 제어하는 방법이 제시된 바 있다. 상기의 연구에서는 로보트와 positioner(이하 R-P 시스템)간의 협조 제어가 여유자유도제어 방법을 이용하여 가능한 것임을 보였다. 그러나 용접작업과 같은 positioner 위에서의 연속경로 작업에 있어서는 작업공간과 특이성(singularity) 등에 관련된 여러 가지 문제점을 안고 있다. 특이성은 외부의 물리적인 제약이나 로보트의 기하학적 구조의 문제로 발생될 수도 있는데 이때 자유도의 손실을 유발하므로 임의의 원하는 방향으로 움직일 수 없게 된다. 이러한 면에서 R-P 시스템의 조작 성능 평가가 중요한 의미를 갖는다. 본 연구에서는 실제 산업현장에서 이용되고 있는 5 자유도를 갖는 수직 다관절형 로보트와 positioner에 대하여 협조 제어 방법을 검토한다. 그리고 작업공간 내의 조작성능평가를 위하여 Jacobian 행렬을 이용한 조작성지수를 위하여 Jacobian 행렬을 이용한 조작성지수를 도입하고 주어진 작업단면에 대한 이들의 분포를 등고선 그래프로 시각화 한다. 또한 조작성지수를 최대화 하는 알고리즘을 R-P 시스템에 적용하고 시뮬레이션을 통하여 그 타당성을 검토한다

• 항공우주기술
• /
• 제5권2호
• /
• pp.85-89
• /
• 2006

우주비행체의 추진시스템은 주차 궤도에서 임무 궤도도의 진입을 위해 필요한 임펄스 및 궤도에서의 3축 자세제어에 요구되는 적절한 임펄스를 제공하는 역할을 수행한다. 새로운 저궤도위성 추진시스템은 용접으로 조립된 단일추진제 하이드라진 시스템으로 추력기, 추진제 템크, 압력변환기, 추진제 필터, 격리밸브 및 충전/배출 벨브 등의 주요부품들로 구성되며, 그외 각 부품들을 연결해주는 추진제 배관과 열제어 부품들이 추가된다. 이 논문에서는 저궤도위성 추진시스템의 예비 설계과정이 서술되었다.

• Journal of Welding and Joining
• /
• 제30권6호
• /
• pp.42-48
• /
• 2012

Due to increase in demand of stable and long pipelines in natural gas industry, wide range of researches are being performed on automation welding to improved welding quality with respect to weld process parameters in real time measurement. In particular, the coupling between the pipe manufacturing process and location of the weld seam, the measured size of the gap that exists in the weld position and the weld angle depending on whether the movement of molten weld. This is due to absence of controlling welding penetration position, depending on the required size of the angle of the setting. In addition, the optimum welding conditions must be considered while selecting, the correlation between these variables and the systematic correlation has not yet been identified. Therefore, in most welded pipe root-pass weld solely depends on the experience of workers in relation to secure a stable weld quality. In this study, automation welding system is implemented to select a suitable root-pass STT (Surface Tension Transfer) welding method using the optimal welding conditions. To successfully accomplish this objective, there were various welding conditions used for welding experiment to confirm that the assessment required for construction through the pipe and automatic welding process is proposed to optimize this plan.

• Journal of Welding and Joining
• /
• 제28권6호
• /
• pp.21-27
• /
• 2010

Due to excellent weld quality, orbital welding with TIG is widely applied to pipe welding. But concave back bead is formed easily in overhead and inclined-up position of butt orbital welding. It is difficult to find a paper to overcome this problem. In this study, in order to make convex back bead in overhead and inclined-up position of pipe 5G welding, control method of molten pool was actively investigated. Melt run welds were conducted on thickness 4.0mm SS400 with overhead and inclined-up position and was observed the variation of bead shape after welding with the bead former developed. The height of back bead showed the trend of increase as the distance from molten pool to the bead former was decreased. Also, there is no trend in the bead width of front and back as welding position was changed or the distance from molten pool to the bead former was decreased.

• Journal of Welding and Joining
• /
• 제29권3호
• /
• pp.58-63
• /
• 2011

Bead shape control with gas force process has been developed to overcome the concave back bead in pipe orbital welding. However, It is impossible to make a convex back bead using the existing gas nozzle, because it has high gas-consuming and low gas force. The purpose of this paper, to develop optimum shape of nozzle which to reduce the consumption of gas, maximizing the shield gas force with low cost and high productivity coincide the Green welding. In this paper venturi-type nozzle was compared with existing CP-type nozzle by TIG pulse welding in overhead position. As a result, CP-type occurs the wormholes in the overhead position, but the Venturi-type without the pore and formed a good bead appearance.