• Journal of Welding and Joining
• /
• 제6권4호
• /
• pp.1-6
• /
• 1988

아크용접에 로보트가 적용되면서 그 적용대상 폭을 넓히기 위하여 여러 종류의 센서들이 개발되어 왔다. 그 중 로보트나 자동용접장치에 장착이 용이한 아크센서에 대하여 원리들과 응용한 예들을 소개하였다. 용접이음부의 최소두께 제한, 용접중 용융지의 처침(Distortion) 등에 따른 아크신호의 불안정이 문제로 남아 있으므로 아크센서의 신뢰도를 향상시키기 위해서는 각 용접공정의 보다 정확한 해석이 요구되며, 이들을 적용하기 위한 제어 알고리즘의 개선 또한 요구된다. 아크센서가 개선되어 신뢰도가 높아질수록 더욱 광범위하게 적용될 것이며, 아크용접작업의 생산성 향상에 크게 기여하게 될 것이다.

• 한국레이저가공학회지
• /
• 제15권1호
• /
• pp.10-14
• /
• 2012

Pulse laser welding was performed on C22 metal bellows. The results can be summarized as follows: Laser welded metal bellows had less thermal distortion, narrow HAZ, high aspect ratio in comparison with other welding processes like TIG, Plasma welding. Laser welded bellows has higher tensile strengths than that C22 base metal. The value of hardness in laser weld metal was measured 100-120 Hv, it was decreased compared to the base metal. It is reasoned that due to the annealed by heat input during the laser welding.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.775-778
• /
• 1996

In this research, the robustness of a seam tracking for the automatic welding system is studied. The laser displacement sensor is used as a seam finder. X-Y moving table drived by ac servo motor controls the position and velocity of the torch-and-sensor part. However, dc servo motor is used to control the position and velocity of the torch. The sensor locates ahead of torch to preview the weld line, and brings about the inaccuracy on the torch tracking. To enhance the robustness on this system against the influence of disturbances and model uncertainty, H$\_$.inf./ control is applied to the angular motion of torch. The simulation shows that the tracking accuracy improved significantly. Also, experimental results give a good performance of H$\_$.inf./ control strategy to the automatic seam tracking system for the welding.