• Journal of Welding and Joining
• /
• v.12 no.2
• /
• pp.28-38
• /
• 1994

고속 연속용접시 필연적으로 발생하는 용접선의 오차를 감소하는 방법으로 용접선 추적을 하게 되는데, 본 연구에서는 근래에 상용화된 전자기식 방식과 레이저 시각 방식을 이용하여 용접시 발생할 수 있는 용접선의 형태에 대하여 용접선 추적을 실험하였다. 이 시험을 통하여 각각의 방식에는 고유의 특성을 가지고 있음을 알았다. 효율적인 용접 자동화 시스템을 구성하기 위하여, 용접하고자 하는 대상물 및 시스템에 대하여 적절한 센서의 선택이 선행되어져야 할 것이다. 본 연구실은 수행중인 레이저 용접 자동화 시스템 구성을 할 예정이다. 끝으로 위와 같은 용접선 추적장치는 전량을 수입에 의존하고 있는 실정이다. 보편적인 센서 시스템의 개발보다는 구축 하고자 하는 시스템에 알맞는 센서의 개발이 선행되어야 할 것으로 생각된다.

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.4
• /
• pp.338-344
• /
• 2010

Both ends of welding line are often closed by wall in the welding of ship blocks. In this research, seam tracking sensing system for butt welding in the condition with wall was developed. Seam tracking sensing system measures position of carriage from wall and detects root-pass of welding line. The system consists of the laser displacement sensors and ultrasonic sensors. The laser displacement sensor reciprocal1y rotates by the motor and measures a distance from laser sensor to the welding material. The ultrasonic sensor measures a distance between welding system and walls. The distance measured by the ultrasonic sensor is used to get X(driving) position and to determine initial and end point of the weld line. Y(weaving) and Z(height) of the weld line are obtained by the distance measured by the laser displacement sensor and the orientation of the sensor. The sensing system includes the controller that is independent from the welding carriage. The seam tracking sensing system is attached to both side of welding carriage so that interference between welding torch and sensing system can be avoided during the welding. And both side sensing system minimize dead zone. Finally, developed sensing system was adhered to welding carriage and verified usefulness by experiments.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.12 no.2 s.25
• /
• pp.151-155
• /
• 2006

In these days, welding is the most commonly used metallic connection technology and also is the fundamental production technology of the modem industrial, which is used in various areas of the industrial fields, such as shipbuilding, automobiles, airplanes and plant facilities. However welding process produces strong light, electric currents, and fume gases etc., and the welding automation is not so easy compared to the other works of manufacturing industries which produce the standardized products in large quantities. So it is difficult to weld and detect the all kinds of seams automatically by a specific sensor. In this paper the sensor applying strain gauges is used to detect the seams of triangular wave form. With the auto carriage having the sensor we proposed the experiment to weld and track the seam automatically.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.195-199
• /
• 2005

Semi automatic welding method to use carriage for welding at large size block manufacture welding process of present shipbuilding industry is used much. Carriage is device that transfer welding torch in horizontal fillet weld here, but because it is no function that chase welding like robot welding method, use can be impossible in curved line welding, and simply use in straight line welding. Also, because it is no function that chase welding, though welding mistake corrects this happening often in straight line welding, much times and expense are cost. Added welding chase sensor and 80C196KC microcontroller that use strain gauge to carriage that is using present in paper that see hereupon and manufacture a private line model and container box model welding because developing system that can chase welding automatically straight line and curved line welding establishing and investigate about chase phenomenon.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1992.04b
• /
• pp.91-101
• /
• 1992

본 연구에서는 용접선 추출의 방법으로 현재 많이 사용되고 있는 용접선을 따라 연속적으로 이미지를 얻어 처리하는 사전관찰(preview)기법을 개선하여 용접모재를 한번에 촬영(snapshot)하여 화상처리를 거친 후 용접정보가 들어 있는 CAD database와 비교, 매칭시켜 필요한 용접정보를 획득하는 새로운 방법을 제시한다. 또한 정확한 꼭지점을 추출하기 위해서는 정확한 직선식이 필요한데 이의 계산에는 허프변환(Hough Transform)이 이용되고 있지만 계산시간이 많이 소요되며 부정확하다. 계산시간의 감소 및 정확도의 향상을 위해 기존의 허프변환(Hough Transform)을 개선한 수정된 허프변환(Modified HoughTranform)을 개발하였다.

• Proceedings of the KWS Conference
• /
• 1999.10a
• /
• pp.62-65
• /
• 1999

• Nuclear Engineering and Technology
• /
• v.23 no.1
• /
• pp.1-11
• /
• 1991

The objective of this study is to investigate the effect of weld line on the mechanical strengths and the process of weld line elimination in the Zircaloy-4 resistance upset welding for the fabrication of heavy water reactor fuel rods. The weld current and the amount of upset increased linearly with the main heat, in which two relations between them were derived. It was found that the threshold to obtain sound weld was 50% of main heat in terms of weld upset size, mechanical strengths and weld line elimination. The weld microstructure of resistance upset welds of Zircaloy-4 comprsied basketweave, Widmanstatten and martensite respectively by changing the main heats. Dimples on uniaxially fractured surface at weld line in the Zr-4 welds were larger and deeper compared with those on biaxially fractured surface. It was also found that the process of the weld line elimination in the resistance upset weld of Zircaloy-4 could be divided into three stages in terms of the presence of many pores, their shrinkage and elimination, and the shrinkage of the original weld interface with increasing weld currents.

• Proceedings of the KWS Conference
• /
• 1997.05a
• /
• pp.133-136
• /
• 1997

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.178-178
• /
• 2003

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.1
• /
• pp.144-149
• /
• 2001

There are many types of seam tracking methods actually used in industrial spot. Lately, Non-contact sensor technics are mostly used because non-contact sensor has more advantage than contact sensor in many parts. This paper also concerned about fiber sensor a kind of non-contact sensor. X-Y robot and fiber sensor scan the seam tracking to be weld. After scanning, X-Y robot moves the first working point of being scanned and welding starts automatically. It makes an experiment on some types of Seam tracking like straight line tracking, leaned line tracking and curved line tracking to confirm how well the fibers sensor tracks the seam pass to be weld. And the seam pass that had been tracked was welded by inverter $CO_2$ voiding machine.