• Journal of Drive and Control
• /
• v.21 no.2
• /
• pp.15-22
• /
• 2024

The objective of this study was to examine whether a gerotor pump used in a transmission could be converted into an electric vehicle thermal management system pump using a virtual design environment. To achieve this objective, we first built an environment that could analyze the performance of a gerotor pump in heat transfer fluid. Flow rate, pressure, and volumetric efficiency were then analyzed when using heat transfer fluid in a gerotor pump. Finally, how large the displacement volume of the pump should be designed when using a heat transfer fluid other than oil was determined. Based on results of this study, it is expected that gerotor pumps will be applied to new business fields such as electric vehicle cooling systems.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2007.05a
• /
• pp.375-379
• /
• 2007

폐비닐 여재(Synthetic Waste Polyethylene Media)를 적용한 부착성장식 공정의 유기물 및 질소${\cdot}$인 제거특성에 관한 Pilot Plant 실험 결과 다음과 같은 결론을 얻을 수 있었다. 1) 제거효율은 $RUNI1{\sim}3$에서 $COD_{cr}$ 91.4, 92.4, 93.9%, T-N 56.9, 61.4, 65.1%, T-P는 모든 단계에서 약 45%이상 제거되어 부하변동시에 강한 대처능력을 나타내었다. 2) BOD용적부하 $0.18{\sim}0.40kg/m^3{\cdot}d$, COD용적부하 $0.28{\sim}0.53kg/m^3{\cdot}d$, ${NH_4}^{+}-N$용적부하 $0.12kg/m^3{\cdot}d$을 나타내었다. 3) 도시하수 처리를 위한 생물학적 질소 및 인 제거공법을 본 여재를 이용하여 공정설계시 고려할 사항들과 적절한 대처방법을 다음과 같이 제시할 수 있다. - 1차 침전지에서 유기질소 및 유기인 농도가 높다면 유기질소 및 인 부하량을 감소시키기 위하여 1차 침전지를 설치하되 질소 및 인제거에 유리한 $BOD_5/T-N$, $BOD_5/T-P$를 유지할 수 있도록 체류시간을 1시간미만으로 설계하는 것이 경제적이라고 판단된다. 만일 유기질소와 유기인의 함량이 낮다면 1차 침전지는 제외하는 것이 유리할 것이다. - 여재의 배치는 폭기조에서 용존산소의 균일분포와 슬러지의 적정탈리를 위해 여재를 상하로 배치하거나 또는 여재끼리 일정 간격을 두어 배치하는 것이 바람직하다. 농촌에서의 처분이 문제시 되고 있는 폐비닐을 적용한 본 연구에서의 수처리특성은 기존 하수처리공정에서의 제거효율에 상응하는 처리특성을 나타내었다. 또한 폐비닐 처분의 문제를 해결할 수 있을뿐만 아니라 하수처리시에도 부하변동 등에 강한 대처능력을 나타내어 기존의 하수처리공정에 대체가능성을 나타내었다.

• Journal of Korean Society of Forest Science
• /
• v.106 no.1
• /
• pp.40-53
• /
• 2017

The purpose of this study was to evaluate the effects of container types on physiological characteristics of Zelkova serrata, Fraxinus rhynchophylla and Quercus serrata in the container nursery stage. We used 16 container types [4 growing densities (100, 144, 196 and $256\;seedlings/m^2$)${\times}4$ cavity volumes (460, 380, 300 and $220cm^3/cavity$)] and performed two-way ANOVA to test the differences in photosynthesis, photochemical efficiency and chlorophyll content among container types. Also, multiple regression analysis was conducted to correlate container dimensions with photosynthetic rate. Container types had a strong influence on photosynthesis of three species seedlings. Growing densities and cavity volumes had a significant interaction effect on photosynthetic rate, water use efficiency, stomatal conductance and chlorophyll contents except stomatal conductance of Q. serrata. In all three species, however, interactions between the two factors of container type were not found with regard to photochemical efficiency. Growing density was negatively correlated with photosynthetic rate of F rhynchophylla and Q. serrata, while cavity volumes positively affected on those of three species seedlings. The range of optimal container types was determined by multiple regression analysis based on photosynthetic rate. Consequently, optimal growing density and cavity volume of container by each tree species were found to be approximately $160{\sim}210\;seedlings/m^2$ and $430{\sim}460cm^3/cavity$ for Z. serrata, $130{\sim}150\;seedlings/m^2$ and $390{\sim}440cm^3/cavity$ for F. rhynchophylla and $130{\sim}170\;seedlings/m2$ and $420{\sim}460cm^3/cavity$ for Q. serrata, respectively. Application of adequate container will induce higher quality seedling production in nursery stage, which will also increase seedling growth in plantation stage.

• Journal of Korea Ship Safrty Technology Authority
• /
• s.38
• /
• pp.2-11
• /
• 2015

최근 저탄소 녹색성장 및 그린에너지 개발 정책에 힘입어 외연기관의 일종으로 Stirling Engine에 대한 관심이 고조되고 있다. 스털링엔진은 크게 알파, 베타, 감마형의 3가지 방식으로 구분되어지며 그 중 감마타입 엔진의 설계가 용이하고 다양한 적용이 가능하다는 특징이 있음에도 실린더와 크랭크간의 접속거리 문제로 인하여 알파, 베타 타입에 비하여 용적을 크게 차지하는 문제가 있었다. 이를 해결하기 위한 방안으로 주로 알파형에 적용하는 Yoke crank를 적용하면 용적을 줄임과 동시에 실린더의 병렬화에도 유리하다. 금번 연구에서는 기존의 Ross Yoke crank 설계기법에서 나아가 감마형 스털링엔진의 Yoke crank 설계를 더욱 단순하고 효율적으로 적용할 수 있는 방법을 제시한다.

• Progress in Medical Physics
• /
• v.18 no.4
• /
• pp.202-208
• /
• 2007

Various techniques were evaluated to determine the best method for reducing small bowel involvement in pelvic irradiation. Fourteen patients receiving radiation in pelvic area were enrolled for this study. Five sets of small bowel images were obtained. Patients were positioned on a simulation couch with full bladder in prone and supine positions and 2 sets of images were taken. Then they were asked to empty their bladder and 2 sets of images were taken in prone and supine positions. A belly board device (BBD) was placed and one set of images was obtained. Using a software, the area of small bowel inside treatment field was contoured, measured, and analyzed. In both full and empty bladder cases, small bowel area reduction was observed in prone position as compared to supine position. Especially statistically significant reduction is noted in lateral film. An average decreases of 13% in PA and 26% in lateral direction were noted with bladder distention as compared to empty bladder. With the use of BBD for empty bladder, a significant reduction of $62.8{\pm}27.1%$ and $63.1{\pm}32.9%$ in PA and lateral directions were observed as compared to without BBD in prone position, respectively. In conclusion, the best sparing of small bowel concerning the area included in the treatment fields was achieved with BBD in prone position with empty bladder. However, further reduction is expected if the bladder was filled fully because the analysed data with empty vs full bladder study shows increased sparing of small bowel with distended bladder.

• Fire Science and Engineering
• /
• v.30 no.1
• /
• pp.104-110
• /
• 2016

Positive displacement pumps with high pressure and water capacity are used large fires in various high-rise buildings. This study provides information for a performance approval standard of fire pumps for fire trucks based on centrifugal pump standards enacted in 2012. An experiment was conducted with a positive displacement pump for three levels of performance from the approval standard (V-1, 2, and 3). The efficiency of the pump was included in the reference, which requires the approval of 65% performance, the same as a centrifugal pump. The water pressure is between 1.5 and 2.5 MPa, and the required flow rate was established as at least $0.31m^3/min$ and up to $3.0m^3/min$. A relief valve was added to adjust the shut-off pressure due to the structural characteristics of the positive displacement pump. A strainer was also installed to prevent damage to the inside of the pump due to foreign matter. However, the strainer includes a difference from the positive displacement pump to operate without a vacuum pump and the centrifugal pump. This is due to the additional approval standard portion of the positive displacement pump, which is expected to be selected for more variety of fire-fighting equipment and proactive responses to fire suppression in a high-rise buildings and large fires. In conclusion, this approval standard was enacted in January 2016.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.199-206
• /
• 2016

The aim of this study was to establish the optimal conditions to design a shoe rack that could effectively sterilize and deodorize shoes contaminated by various bacteria. The manufacture and evaluation of a shoe rock was conducted for one year from October 2014 to September 2015. The antibacterial efficacies were evaluated using Escherichia coli and Staphylococcus aureus by JIS Z 2801:2010. The deodorization efficiency was identified by the standard method for deodorization efficiency evaluation of an indoor air cleaner established by Korea Air Cleaning Association, SPS-KACA002-132:2006. The results showed that antibacterial evaluation showed more than 99.9% of the sterilization effects on Escherichia coli and Staphylococcus aureus after exposure to ultraviolet (UV) light for 30 seconds. The average deodorization efficiency for the test gases was 42.5%. The temperature in the shoes and in the shoe rack was lower than $40^{\circ}C$ and $25^{\circ}C$, respectively, when the UV lamp was turned on for 5 minutes and off for 25 minutes repeatedly. This was controlled by turning the UV lamp on and off to maintain the appropriate temperature in the shoes. In conclusion, the real deodorization efficiency is expected to be higher than the measured value because the internal volume of the shoe rack was smaller than the test chamber used to measure the deodorization efficiency. The deodorization effect could be increased further by the sterilization of bacteria causing bad odors in shoes. Further studies will be needed to determine the temperature deviations within the shoe rack to provide constant conditions.

• Korean journal of food and cookery science
• /
• v.13 no.4
• /
• pp.507-513
• /
• 1997

To separate and concentrate functional components contained in soybean curd whey, ultrafiltration was performed using regenerated cellulose or polysulphone membrane of spiral-wound type with MWCO 10,000, and the permeate and retentate solutions were analyzed. As the pH of soybean curd whey increased, the permeate flux decreased in both membranes. Treatment of 0.01 M EDTA rather decreased the permeate flux compared with control. The concentration of ionic calcium, which decreased with the pH increase, was thought to affect the permeate flux also. In case of polysulphone membrane, the permeate was efficiently purified and the retentate protein was concentrated significantly in which the membrane rejection value (MRV) for chemical oxygen demand (COD) was 79.25% and that of protein was 98.42% at the volume concentration ratio (VCR) of 10. MRV of the protein of regenerated cellulose membrane was lower than that of polysulphone membrane. To recover oligosaccharides to the permeate solution and increase the content of raffinose and stachyose, regenerated cellulose membrane was more suitable than polysulphone membrane and the optimum VCR was 4.

• Journal of the Korean Magnetics Society
• /
• v.25 no.6
• /
• pp.208-218
• /
• 2015

Recently, radiation therapy is used in the CT existing conventional two-dimensional radiation image, and set the size and location of the tumor in a manner that the image is going to change the treatment plan. After using the simulation using CT, radiation therapy it is four-dimensional or three-dimensional treatment made possible. and radiation therapy became the more effective ever before. High technology radiation therapy such as the treatment of SRS,IMRT, IGRT, SBRT, is a need to try contemplating the possibility to apply appropriate analysis and situation, so it has its own characteristics. and then it is believed that it is necessary to analyze and try it worries the proper applicability of the situation. The configuration of the various treatment that is applicable in many hospitals is necessary to try to determine how to practically apply the patients. Critical organs surrounding tumor give a small dose to avoid side effects and then the tumor has the therapeutic effect by providing a larger dose than before the radiation treatment.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.04a
• /
• pp.356-359
• /
• 2003

영화유기화합물의 제거에 있어서 일반적으로 이용되는 금속분말로는 아연, 주석, 니켈, 납, 철 등이 알려져 있으며, 경제성과 반응성이 좋고, 독성을 야기하지 않는다는 측면에서 영가 철이 가장 많이 연구·실용화되어 적용되고 있는 실정이다. 본 연구에서는 제철부산물들의 비표면적 측정, 화학적 구성성분 분석 및 pH의 변화를 통해 TCE, PCE 제거능력 평가 및 탈염소화반응을 확인하였으며, 제철부산물인 사상분진과 열연슬러지가 TCE 및 PCE의 제거효율적인 측면이나 산업폐기물의 재활용적인 측면에서 순수철보다 우수하다는 것을 확인하였다.