• Proceedings of the KWS Conference
• /
• 2006.05a
• /
• pp.298-300
• /
• 2006

• Journal of Conservation Science
• /
• v.26 no.2
• /
• pp.157-169
• /
• 2010

This study focused on the material characteristics and archaeometric relationship between the molten glass and bronze materials within the crucibles and gilt-bronze Bodhisattva statue excavated from the Ssangbukri site in Buyeo, Korea. Yellowish green to red brown vitreous material in the crucibles was identified as lead glass which contained scarce amount of BaO, and low $Al_2O_3$ and CaO. Metallic molten material was identified as bronze of copper-tin-lead alloy with low amount of impurities that indicated well-refined materials. Also, cassiterite was used for raw metal ore of tin. The Bodhisattva statue consisted of major copper with trace impurities in the core metal, and gold amalgam in the gilded layer. Though lead isotopic analysis showed contradictory results in each lead glass, bronze and Bodhisattva statue that required further examination, it could be stated that the statue was made in the Ssangbukri site based on the high-level technical skills of bronze production.

• The Journal of the Petrological Society of Korea
• /
• v.18 no.2
• /
• pp.153-169
• /
• 2009

Hornblende gabbro-lamprophyre-diorite Complex in Guwoonri, Hwacheon distributes in a zonal pattern, where the diorite distributed along the margin of the Complex encompasses the hornblende gabbro body in the central part of the Complex, and lamprophyre intruded in vein along the boundary between diorite and hornblende gabbro. The hornblende gabbro in the central part of the Complex also shows a zonal distribution pattern, where hornblende gabbro containing subspherical amphibole phenocrysts as a major mafic mineral(Sag) surrounds hornblende gabbro with prismatic amphiboles as a principal mafic mineral(Pag). The zonal distributions observed in hornblende gabbro-lamprophyre-diorite Complex in Guwoonri resulted from two different geological processes. The zonal distribution among diorite, lamprophyre, and hornblende gabbro was due to intrusions of three distinct magmas derived from different degree of partial melting of a common source rock, whereas the zonal distribution shown within the hornblende gabbro body occupying the central part of the Complex resulted from an inward fractional crystallization of a single magma. Geochemical characteristics and mineral mode of hornblende gabbro, lamprophyre, and diorite indicate that these rocks formed from hydrous mafic to intermediate magma derived from partial melting of enriched mantle, which has been caused by infiltration of volatiles including water into mantle in plate margin.

• Journal of Welding and Joining
• /
• v.15 no.4
• /
• pp.78-89
• /
• 1997

This study has evaluated the weld metal solidification cracking behavior of several Ni base superalloys (Incoloy 825, Inconel 718 and Inconel 600). Austenitic stainless steels(304, 310S) were also included for comparison. In addition, a possible mechanism of solidification cracking in the fusion zone was suggested based on the extensive microstructural examinations with SEM, EDAX, TEM, SADP and AEM. The solidification cracking resistance of Ni base superalloys was found to be far inferior to that of austenitic stainless steels. The solidification cracking of Incoloy 825 and Inconel 718 was believel to be closely related with the Laves-austenite (Ti rich in 825 and Nb rich in 718) and MC-austenite eutectic phases formed along the grain boundaries during solidification. Cracking in Inconel 600 was always found along the grain boundaries which were enriched with Ti and P. Further, solidifidcation cracking resistance was dependent not only upon the type of love melting phases but also on the amount of the phases along the solidification grain boundaries.

• Fire Science and Engineering
• /
• v.18 no.4
• /
• pp.72-77
• /
• 2004

In this paper, we studied on the short-circuit process, surface structure, and component variation of vinyl cords. In the results of high speed imaging system (HSIS) analysis, as soon as wire covering was damaged by heat, the conductor of wire came in contact with the other conduct of wire, and the short-circuit occurred. Stereomicroscope and SEM analysis indicated that the source part of wire showed V-type form. The molten beads of load part were bigger than those of source part. In the results of EDX analysis, Cu and O were detected in the source part, whereas covering material (Cl, Ca), Cu and O were detected in the load part. The results will help us to find out the cause of electrical fire.

• Proceedings of the KIEE Conference
• /
• 2007.04c
• /
• pp.231-233
• /
• 2007

본 논문은 신 발전방식 중 하나인 용융탄산염형 연료전지(Molten Carbonate Fuel Cell, 이하 MCFC) 발전시스템에서 생성된 전력을 계통에 안정적으로 변환, 주입하기 위한 계통연계형 전력변환기를 설계, 제작하고 성능 시험을 수행한 결과이다. 250kW급 MCFC 시스템의 정격 사양 및 스택의 운전 형태를 기반으로 250kW급 전력변환기 구조 및 단위기기를 설계하였고 전력변환기는 크게 DC/DC 컨버터부와 DC/AC 인버터부로 구성된다. 본 논문은 MCFC 발전 시스템에 적용되는 전력변환기(Power Conditioning System, 이하 PCS)를 제작하고 성능을 확인하는데 목적이 있다.

• Proceedings of the KWS Conference
• /
• 1996.10a
• /
• pp.42-44
• /
• 1996

이종재료인 2$\frac{1}{4}$Cr-1Mo강과 12Cr-1Mo-V계 강의 용접부의 용접성에 대하여 모재계열의 용접재료와 Inconel계의 용접재료를 사용하여 야금학적인 관점으로부터 미세조직적 특성 및 기계적성질을 중심으로 검토하였다. 그 결과를 요약하면 다음과 같다. (1) 본 연구의 실험범위에 의하면, 내부결함, 균열 등의 용접결함을 발생하지 않는 양호한 용접부를 얻을 수 가 있었다. (2) 광학현미경을 이용한 미세조직의 관찰에 의하면, Inconel계의 용접재료를 제외한 모재계열의 용접재료를 사용하였을 경우, 용융경계부 근방에서 연속 또는 불연속적인 백색의 밴드상이 형성되었다. (3)백색밴드상의 형성부는 인장변형에 의하여 국부적인 수축변형을 일으키나, 파단은 2$\frac{1}{4}$Cr-1Mo강의 모재에서 발생하였으며, 거시적인 인장성질에는 영향을 미치지 않았다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.4
• /
• pp.413-421
• /
• 2010

In this study, residual-stress distributions in welds with different strength used in natural gas pipelines are calculated by using finite-element analysis and simulating a realistic welding process. The temperature and residual-stress analysis results are compared with the real fusion profile and the application results of the Fitness-For-Service assessment code, API 579 in order to validate the finite-element analysis model and procedure. Parametric study is performed to assess the effect of welding and material variables such as mechanical strength mismatch, the strength of weld metal, reinforcement, and heat input on the residual stress distributions. Finally, on the basis of the parametric study results, the effects of these variables on residual stress distributions are investigated. In particular, the strength mismatch between base metals has an insignificant effect on residual-stress distributions.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.04a
• /
• pp.184-190
• /
• 2004

Over the last few years, there has been a growing interest in quantitative representation of the weld pools in order to relate the processing conditions to the driving forces of the weldment produced and to use this information for the optimization of the welding process. A theoretical model offers a powerful alternative to check the physical concepts of the welding process and the effects of driving forces. To solve this problem, a 2-D thermo-fluid model were eve loped for determining temperature and velocity distribution for the GMA welding process.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2002.05a
• /
• pp.235-238
• /
• 2002

폐기물을 처리대상으로 하는 가스화용융공정은 환경문제와 에너지효율 문제를 동시에 접근할 수 있는 공정으로서 향후 연소반응에 근거한 공정을 점진적으로 대체할 것으로 예측되고 있다. 본 센터에서는 "가연성 폐기물처리용 5톤/일급 가스화용융 공정기술개발"의 과제를 과학기술부 국가지정연구실사업을 통해 수행 중에 있으며, 1톤/일급 가스화 용융로의 설계/운전, 폐기물별 가스화용융특성 Database화, 5톤/일급 scale-up 설계 등을 주요 연구목표로 폐기물의 가스화용융기술을 개발 중에 있다.(중략)