• Analytical Science and Technology
• /
• v.12 no.3
• /
• pp.196-202
• /
• 1999

Brown algae, Sargassum horneri, was used as an adsorbent to remove heavy metal Cd(II) and Pb(II) ions. Sargassum horneri picked in East Coast was formulated into the grain with the size of 40-60 mesh after wind dry. Batch method was used in order to investigate the adsorption rate by measuring the adsorption amounts with shaking time. In the column method, the adsorption amounts were measured by flowing metal solutions into the algae-packed column at the rate of 1 ml/min. Adsorption amounts in both batch method and column method were in the following order : pH 10.5>7.0>3.5. It was found that Pb(II) was more adsorbed on the algae grain than Cd(II). It was also revealed that the adsorption amounts reached the maximum within 5 minutes irrespective of pH condition in the batch method. It was concluded that the batch method was more effective than the column method in terms of recovery rate.

• Analytical Science and Technology
• /
• v.9 no.4
• /
• pp.373-381
• /
• 1996

Algal biomass was used in our study in order to remove some metals. After packing of 40~60 mesh algae powder into column for use of metal adsorbent, the metal solution of 1mL/min of flow rate was eluted to adsorb in algae. More amount of Cu(II) or Zn(II) ion in green algae, Ulva pertusa Kjellman than in brown algae, Sargassum horneri (Turner) C. Agarch were adsorbed and Cu(II) ion was more adsorbed in both algae than Zn(II) ion. Recovery of metal from algae is showing higher in acidic or neutral than in alkalic conditions. Cu(II) ion is recovered relatively higher than Zn(II) ion in our system.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.6
• /
• pp.72-80
• /
• 2006

Fallen needle (8.5 kg) of Larix kaempferi were collected and extracted with 95% EtOH. The EtOH extracts were evaporated under reduced pressure, concentrated, and successively fractionated with a series of hexane, methylene chloride, ethylacetate and water on a separatory funnel to be freeze dried. A portion of ethylacetate and water soluble powder were chromatographed on a Sephadex LH-20 column eluting with aqueous MeOH and EtOH-hexane mixture. Spectrometric analyses such as NMR and FAB-MS, including TLC, were performed on the seven isolated compounds and were elucidated as (+)-catechin, (-)-epicatechin, 2"-O-rhamnosylvitexin, juglanin, afzelin, laricitrin-3-O-${\beta}$-D-glucopyranoside, isoquercitrin and cedrusin.

• Journal of Environmental Science International
• /
• v.6 no.1
• /
• pp.61-67
• /
• 1997

Heavy metal adsorption by microbial cells is an alternative to conventional methods of heavy metal removal and recovery from metal-bearing wastewater The waste Sac-chuomyces cerevisiae is an inexpensive, relatively available source of biomass for heavy metal biosorption. Biosorption was investigated by free and immobilized-S. cerevisiae. The order of biosorption capacity was Pb>Cu>Cd with batch system. The biosorption parameters had been determined for Pb with free , cells according to the Freundlich and Langmuir model. It was found that the data fitted reasonably well to the Freundlich model. The selective uptake of immobilized-S. cerevisiae was observed when all the metal ions were dissolved in a mixed metals solution(Pb, Cu, Cr and Cd). The biosorption of mixed metals solution by immobilized-cell was studied in packed bed reactor. The Pb uptake was Investigated in particular, as it represents one of the most widely distributed heavy metals in water. We also tested the desorption of Pb from immobilized-cell by us- ing HCI, $H_2SO_4$ and EDTA.

• Analytical Science and Technology
• /
• v.11 no.3
• /
• pp.222-228
• /
• 1998

Five kinds of packed column and two kinds of capillary column were used to get optimum condition for ethanol analysis by using fifteen different volatile, low molecular weight organic substances. Only two columns, Gaskuropack 54 and DB-1, showed good separation efficiency. In the adding salt-effect experiment 0.6N - perchloric acid, 1M - meta-phosphoric acid and saturated NaCl solution were used for alcohol concentration measurement of biological fluids and tissue specimens. Among adding salt experiment, adding saturated NaCl solution showed the most stable value of alcohol concentration. This fact might be due to the increased vaporization of alcohol in the saturated NaCl solution. In the time-course of blood alcohol concentration, the alcohol level was lineary decreased to the diameter of vessel containing specimens. This result was interpreted in view of ethanol level, weight, water content, and hematocrit value. The ethanol distribution levels were measured from samples of blood and tissue obtained from 25 postmortems cases investigated by NISI. This study showed that the distribution level was decreased in order of brain, blood, kidney, spleen, liver, and lung.

• Applied Chemistry for Engineering
• /
• v.10 no.8
• /
• pp.1186-1191
• /
• 1999

By using a liquid-mix precursor, we prepared the hollow glass spheres(HGS) as an additive of polymer compound which are used in the field of modifier, promoter, filler, and reinforcement. Liquid-mix precursor is a mixture of 40% sodium silicate aqueous solution, boric acid as a insolubilizing agent, and urea as a blowing agent. To obtain the precursor particles which are fed into a gas flame furnae, the above liquid-mix precursor was dried in oven and crushed with ball mill. We assumed the size of precursor particles ($53{\sim}63{\mu}m$, $63{\sim}180{\mu}m$), temperature of furnace($800{\sim}1200^{\circ}C$), and amount of urea(0~30 g) as the parameters affecting on the properties of HGS. As a result mean particle size of HGS increases with increasing the temperature of furnace and the amount of urea and with decreasing the size of precursor particles. Also, we found that incresing the amount of urea is related to a decrease of the crush strength of HGS.

• KSBB Journal
• /
• v.8 no.4
• /
• pp.328-335
• /
• 1993

A flow injection analysis(FIA) system was developed for the determination of cholesterol using immobilized cholesterol oxidase and cholesterol ester hydrolase. The enzymes were immobilized on controlled pore galas(CPG) by the glutaraldehyde method. The glass colunms packed with immobilized enzymes were found to contain 3-5 I.U. for each enzyme. A hydrogen peroxide sensitive electrode was contructed and applied to the FIA system. The operational conditions for FIA response were investigated and optimized with variation of sampling volume, flow rate and composition of carrier solution. The FIA response were linear upto 60 and 400mg/m1 for free cholesterol and cholesterol ester, respectively. All samples were analyzed with a good precision (<2.5% CV) and accuracy. 23 samples were mea sured succesively within about an hour. Intermittent assays of more than 500 times caused 50% decrease in response sensitivity.

• Korean Journal of Environmental Agriculture
• /
• v.19 no.3
• /
• pp.218-222
• /
• 2000

Wasted${\cdot}$rested mine areas give lots of effect on around-environmental changes after mining development. Leaching water at reclaimed land has been eluted from the solid components through physical, chemical, biological procedures by waters percolated through reclaimed site. The element analysis of waste tungsten ore tailing, leaching water analysis and removal of heavy metal by zeolite were performed to investigate the influent of acid rain on the released contents of H. M. The heavy metal contents in leaching water were determined to be As $1.21\;{\sim}\;1.54\;ppm$, Pb $0.11\;{\sim}\;0.15\;ppm$ and $SO_4\;^{2-}$ was $302\;{\sim}\;378ppm$. As deionized water and simulated acid rain (pH 3,4) were percolated through columns packed tungsten ore tailing, the amount of Mn, Na, Ca which were dissolved by pH4 solution was higher than those by distilled water. However, W and Mo were eluted easily by high pH solution. The change of heavy metal concentration by column experiment packed zeolite was effective a little because heavy metals were adsorved much more by zeolite.

• Journal of Soil and Groundwater Environment
• /
• v.13 no.6
• /
• pp.23-30
• /
• 2008

Air sparging technique has been used for remediation of VOC(volatile organic compound)-contaminated aquifer. The aim of this study was to develop an innovative air sparging technique that enhances the efficiency of air intrusion into a specific horizontal layer of aquifer where the contaminants exist with the help of water-soluble surfactant. A twodimensional physical box model, packed with homogeneous sand, was used for simulating the aquifer in this study. Aqueous solution of anionic surfactant (100 mg/L, sodium dodecylbenzene sulfonate) was used to suppress the surface tension of groundwater. Three sets of experiments were conducted: air sparging experiment without surfactant application, air sparging experiments for box model where the surfactant solution was applied right above the air injection point, and air sparging experiments with surfactant solution layer formed in the middle of the box. It was found that the sparging influence zone was expanded up to five times of that formed by sparging without surfactant application. The size of sparging influence zone was more sensitive to the air flow (injection) rate with surfactant application than that without surfactant. More importantly, injection of air into the target aquifer layer was successful with surfactant application. Findings in this study are expected to provide more options for designing remediation processes using air sparging.

• Korean Journal of Food Science and Technology
• /
• v.21 no.1
• /
• pp.136-144
• /
• 1989

The purification of myrosinase from radish roots was performed using Concannavalin A-Sepharose affinity chromatography and gel permeation HPLC, which gave a 22-fold-purification(S.P.A.=39,000 units/mg) with 50% recovery, SDS-polyacrylamide gel electrophoresis showed a single major band, suggestive of a relatively pure myrosinase, and the M.W. of the enzyme determined on gel permeation HPLC was ca. 124K. The enzyme showed on optimum pH of 6.5 and was stable at pH 6 to 7 at room temperature, but unstable below pH 4. The enzyme possessed an optimum temperature of $37^{\circ}C$, and gave a Vmax value of $40\;{\mu}moles/mg{\cdot}min$ and a Km value of 0.12mM for sinigrin. The purified myrosinase was activated maximally by 0.6mM of ascorbic acid, but somewhat inhibited by more than 2 mM ascorbic acid. The activities of myrosinase present in the peelings and the peeled radish amounted to approximately 1,333 units/g and 140 units/g weight, respectively and the peelings contained much more myrosinase activity than the peeled radish.