• Food Science and Preservation
• /
• v.15 no.1
• /
• pp.133-138
• /
• 2008

This study investigated the antioxidant activities of extracts from Angelica dahurica roots after microwave-assisted extraction with different levels of energy (120, 240W) and extraction time (5, 10, 15 and 30 min). The highest extraction yield was 11.77 mg% in water at 240W for 30 min followed by 11.42 mg% in water at 120Wand 30 min. The highest total polyphenol contents was 32.36 mg/g in an ethanol extract, followed by 31.77mg/g in water extract at the same conditions of 240W, 30 min. The electron donating abilities both the ethanol extract obtained using 240W and 30 min and the water extract obtained employing 120W and 5min showed the highest values, 83.55% and 82.49% respectively at a concentration 1.0mg/mL. The highest superoxide dismutase (SOD)-like activity was 14.16% in ethanol extract at 120Wand 15min, followed by 13.22% in the water extract at 120W and 5 min. The best extraction yield and polyphenol content after microwave-assisted extraction were achieved with 240W and 30 min using water. The best condition for extraction of electron donating ability and SOD-like activity from A dahurica roots were 120W and 5 minutes using water.

• Composites Research
• /
• v.12 no.2
• /
• pp.91-100
• /
• 1999

The manufacture of high strength polyethylene(HSPE) tape yarns has been accomplished by a solid state processing(SSP) method as the compaction of ultra-high molecular weight polyethylene(UHMWPE) powders and drawing of the compacted film under the melting point without any organic solvents. In this study, the characteristics of HSPE tape yarns produced by SSP which is desirable for production cost and environmental aspect were analyzed. As the results, tensile strengths of HSPE tape yarns increased with increasing the draw ratio and the fracture morphology of highly drawn HSPE tape yarns showed more fibrillar shape than the low drawn one. Interfacial shear strengths of HSPE tape yarns with vinylester resin increased by $O_2$ plasma treatment and maximum interfacial shear strength was obtained in the plasma treatment condition of 100W and 5min. In addition, mechanical properties of HSPE tape yarn reinforced composites were investigated and compared with those of the gel spun HSPE fiber reinforced composites.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2003.05a
• /
• pp.422-427
• /
• 2003

고분자 물질의 대부분은 유기용매를 사용하여 제조되는 경우가 일반적이었다. 이들 중에는 용제형 아크릴계 고분자는 점착강도, 내습성, 내수성 그리고 내열성 등이 우수하여 페인트, 접ㆍ점착제, 섬유 등의 산업전반에 이용되고 있으나 용제사용에 따른 화재의 위험성과 환경적인 문제점 때문에 규제의 대상이 되고 있다.(중략)

• Journal of the Korean Ceramic Society
• /
• v.38 no.11
• /
• pp.1060-1066
• /
• 2001

Water-based alumina tapes for application of all-ceramic crowns were fabricated using PVP as binder that is biocompatible, highly soluble in solvents, and no residue leftafter firing. Tensile strength of alumina tapes was governed by binder/(binder+plasticizer)ratio. On the other hand, linear shrinkage and density were determined by alumina/(alumina+organic) ratio. Composite for all-ceramic crowns, prepared by infiltration of a glass into sintered porous alumina, showed high flexural strength which increased with increasing sintered density.

• Korean Chemical Engineering Research
• /
• v.53 no.6
• /
• pp.792-797
• /
• 2015

Graphene has a wide spectrum on its application field due to various and excellent physical properties. However, it is very difficult to apply that graphene exists as lump or fold condition in general organic solvents. Besides, graphene was difficult to maintain as uniform condition due to chemical inert and distributions with various size and shapes. Therefore, this study was focused to study dispersion and modifying methods of aggregated graphene. The dispersion methods contain as follow: i) physical milling using glass bead, ii) co-treatment of glass bead and ultrasonic waves, iii) dispersion in organic solvents, iv) modifying with dry-ice. Milling using glass bead with size 2.5 mm was effective to be size decrease of 36.4% in comparison with control group. Mixed treatment of glass bead (size 2.5 mm) and ultrasonic waves (225W, 10 min) showed relative size decrease of 76%, suggesting that the size decrease depends on the size of glass bead, intensity of ultrasonic waves and treatment time. Solvents of Ethyl acetate (EA) and Isoprophyl alcohol (IPA) were used in order to improve dispersion by modifying surface of graphene. IPA of them showed a favorable dispersion with more -CO functional groups in the FT-IR analysis. On the other hand, the oxygen content of graphene surface modified by dry-ice was highly increased from 0.8 to 4.9%. From the results, it was decided that the favorable dispersion state for a long time was obtained under the condition of -CO functional group increase in IPA solvent.

• Korean Journal of Food Science and Technology
• /
• v.18 no.3
• /
• pp.226-233
• /
• 1986

Myofibrillar proteins were prepared from red muscle and white muscle, and their thermostabilities were compared. Rate constants of inactivation of myofibrillar proteins were increased as the ionic strength of reaction mixture increased and also dielectric constant of reaction mixture decreased. Thermodynamic data forinactivation of myofibrillar proteins, such as $D-value,\;{\Delta}H^{\ddag},\;{\Delta}G{\ddag}\;and\;{\Delta}S^{\ddag$, revealed that thermostabilities of myofibrillar proteins from white muscle were higher than those from red muscle, and that myofibrillar proteins from chicken muscle were more heatlabile than from bovine muscle.

• Journal of Adhesion and Interface
• /
• v.13 no.4
• /
• pp.163-170
• /
• 2012

Although ${\beta}$-cyclodextrin (${\beta}$-CD) has been used as medicine, agrichemical, food, cosmetic, antioxidant, anti-volatile agent, anti-hygroscopic agent, fading-protecting agent, and emulsifier due to its ability to form inclusion complex by enclosing another molecule (guest molecule), it has been restricted in practical application because of its low solubility in water and organic solvent. In this study, ${\beta}$-CD derivative as a new polyol with inclusion characteristics against Bisphenol A and cyclopropane, foaming agent for polyurethane (PU), and with improved solubility was synthesized, characterized and used to formulate rigid PU foam with better thermal conductivity and compressive strength compared to that from commercial polyols.

• Journal of Hydrogen and New Energy
• /
• v.17 no.3
• /
• pp.331-337
• /
• 2006

높은 이온전도도와 충분한 기계적 강도, 전해질 누수가 적은 새로운 형태의 고분자 전해질막(pore-gel SPE)을 연구 개발하였다. 다공성 PVDF-HFP 고분자막의 기공 내에 전해질 용액을 흡수시킨 후 막 내에서 젤화를 진행시켰다. 전해질 용액은 2:2:1의 비를 갖는 PC/EC/DMA에 1M SA(Salicylic acid)를 용해하고 여기에 고분자막을 용해시킬 수 있는 아세톤을 첨가하였다. 초음파를 이용함으로써 고분자막의 용액 흡수율을 증가시키고 또 고분자막에서 젤화를 촉진 시킬 수 있었다. 이렇게 젤화한 막의 이온전도도는 젤화 전 막보다 $1{\sim}2.2$ 배 향상되었고, 인장강도는 gel-type SPE 보다 40 배 증가하였으며, 전해질 누수실험결과 hybrid-type SPE는 13%의 누수를 보였으나 본 연구의 막(pore-gel SPE)은 6%로 감소함을 보였다.

• Applied Chemistry for Engineering
• /
• v.10 no.2
• /
• pp.287-292
• /
• 1999

The conducting composites were prepared by solution blending of polyaniline (PANI) as a conducting polymer and polycarbonate (PC) as a matrix in chloroform. Also the composites film was prepared by solution casting method. The PANI was protonated with alkylbenzenesulfonic acids, such as camphorsulfonic acid (CSA) or dodecylbenzenesulfonic acid (DBSA). The electrical conductivity of composites prepared by solution casting was enhanced compared with that of compression molding. The electrical conductivity, tensile strength and morphology were observed as a function of the amount of protonating agent as well as PANI complex content. In general, as the PANI complex content was increased, the electrical conductivity increased. In the case of the composite film containing 25 wt % of PANI complex doped with DBSA, the electrical conductivity exhibited 3.18 S/cm.

• Journal of the Korean Chemical Society
• /
• v.16 no.6
• /
• pp.354-360
• /
• 1972

Formation of the complexes of barium, strontium and calcium ions with dibasic organic acid ions in dilute solution was studied at room temperature, utilizing the equilibrium exchange technique which involved the uses of radioactive alkaline earth metal ions and cation excbange resin. The organic acids used in this study were succinic and tartaric acids, and the solvents used were water, 20 % acetone-water and 20 % ethanol-water. The pH of the solutions was controlled to 7.2∼7.4, and the ionic strength of the solutions was kept at approximately 0.1. The experimental results indicated that the alkaline earths formed one-to-one complexes in solution with the dibasic acids examined, and that the relative stabilities of the complexes increased in the order: $Ba^{++}; succinic