• Tuberculosis and Respiratory Diseases
• /
• v.47 no.1
• /
• pp.77-89
• /
• 1999

Background: High-dose chemotherapy is increasingly employed in many refractory malignant diseases. This therapy has been reported to increase response rate and survival benefits but it is also associated with higher treatment-related morbidity and mortality. We evaluated clinical characteristics and course of the pulmonary toxicity following high-dose chemotherapy with peripheral blood stem cell transplantation. Methods: Ninety-seven patients who had received high-dose chemotherapy with peripheral blood stem cell transplantation were evaluated. Five patients who developed lung lesions which were not related to infection nor primary malignant disease underwent transbronchial lung biopsy. The patients' clinical characteristics, treatments, and prognosis were reviewed retrospectively. Results: Five patients(5.1%) developed idiopathic pneumonia syndrome. The high dose chemotherapy regimens employed were cyclophosphamide, BCNU, and cisplatin in 3 cases, one case of BCNU, etoposide, Ara-C, and cyclophosphamide combination, and a regimen consisting of BCNU, etoposide, Ara-C, and melphalan. The total dose of BCNU used was 300-400 mg/$m^2$ and that of cyclophosphsmide was 6,000 mg/$m^2$. All of 5 patients received radiation therapy before this treatment. After an average duration of 14 weeks (4-26 weeks) of high-dose chemotherapy, patients developed cough, dyspnea and fever. The chest X-rays showed bilateral diffuse infiltration in 3 cases and the focal infiltration in the other 2 cases. All the patients received corticosteroid therapy as a treatment for the lung lesions. Two of them progressed to acute respiratory distress syndrome and died. Three patients recovered without residual lung lesion but one of them died of dilated cardiomyopathy. Conclusion: High-dose chemotherapy with peripheral blood stem cell transplantation especially which containing BCNU regimen may develop idiopathic pneumonia syndrome related to pulmonary toxicity and corticosteroid therapy may be bel1eficial in some cases.

• Environmental and Resource Economics Review
• /
• v.14 no.4
• /
• pp.817-838
• /
• 2005

In this paper, the resource adequacy as well as the optimum fuel mix is obtained by the following procedures. First, the regulation body, the government agency, determine the reliability index as well as the optimum portfolio of the fuel mix during the planning horizon. Here, the resources with the characteristics of public goods such as demand-side management, renewable resources are assigned in advance. Also, the optimum portfolio is determined by reflecting the economics, environmental characteristics, public acceptance, regional supply and demand, etc. Second, the government announces the required amount of each fuel-type new resources during the planning horizon and the market participants bid to the government based on their own estimated fixed cost. Here, the government announces the winners of the each auction by plant type and the guaranteed fixed cost is determined by the marginal auction price by plant type. Third, the energy market is run and the surplus of each plant except their cost (guaranteed fixed cost and operating cost) is withdrew by the regulatory body. Here, to induce the generators to reduce their operating cost some incentives for each generator is given based on their performance. The performance is determined by the mechanism of the performance-based regulation (PBR). Here the free-riding performance should be subtracted to guarantee the transparent competition. Although the suggested mechanism looks like very regulated one, it provides two mechanism of the competition. That is, one is in the resource construction auction and the other is in the energy spot market. Also the advantages of the proposed method are it guarantee the proper resource adequacy as well as the desired fuel mix. However, this mechanism should be sustained during the transient period of the deregulation only. Therefore, generation resource planning procedure and market mechanisms are suggested to minimize possible stranded costs.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.17 no.4
• /
• pp.375-387
• /
• 2019

In this study, the radiation dose rates for the design basis fuel of 360 assemblies CANDU spent nuclear fuel transportation cask were evaluated, by measuring radiation source terms for the design basis fuel of a pressurized heavy water reactor. Additionally, radiological safety evaluation was carried out and the validity of the results was determined by radiological technical standards. To select the design basis fuel, which was the radiation source term for the spent fuel transportation cask, the design basis fuels from two spent fuel storage facilities were stored in a spent fuel transportation cask operating in Wolsung NPP. The design basis fuel for each transportation and storage system was based on the burnup of spent fuel, minimum cooling period, and time of transportation to the intermediate storage facility. A burnup of 7,800 MWD/MTU and a minimum cooling period of 6 years were set as the design basis fuel. The radiation source terms of the design basis fuel were evaluated using the ORIGEN-ARP computer module of SCALE computer code. The radiation shielding of the cask was evaluated using the MCNP6 computer code. In addition, the evaluation of the radiation dose rate outside the transport cask required by the technical standard was classified into normal and accident conditions. Thus, the maximum radiation dose rates calculated at the surface of the cask and at a point 2 m from the surface of the cask under normal transportation conditions were respectively 0.330 mSv·h^-1 and 0.065 mSv·h^-1. The maximum radiation dose rate 1 m from the surface of the cask under accident conditions was calculated as 0.321 mSv·h^-1. Thus, it was confirmed that the spent fuel cask of the large capacity heavy water reactor had secured the radiation safety.

• Korean Journal of Soil Science and Fertilizer
• /
• v.29 no.4
• /
• pp.342-346
• /
• 1996

Field experiments were conducted to investigate the mode of changes in exchangeable K contents in the soil under the continued(for three years) application of different levels of K fertilizer(KCl) with and without application of conventional compost(CC) and chicken-dung derived compost (CDC) for red pepper cultivation at two field parcels with different exchageable K contents on Gopyong silty loamy soil. The application of KCl at standard rate for red-pepper resulted in the increase in exchangeable K in the soil after each harvest of the crop. while no application of K and the application of KCl at one half of the standard rate tended to lower the exchangeable K in top soil with the cultivation of the crop. The application of compost in addition to KCl ammplified the difference in exchangeable K in the soil before and after the harvest of each crop. An equation could resonably well predict the exchageable K content in top soil after the years of crop cultivation, under different treatments. were developed.

• Journal of the Korea Concrete Institute
• /
• v.25 no.3
• /
• pp.339-345
• /
• 2013

This study is to derive from the required performances and the optimum mix proportion of the roof concrete placed in the in-ground LNG storage tank with a capacity of 200000 $m^3$, and propose the actual data for site concrete work. The concrete placing work without sliding and segregation in the fresh concrete condition is very important because the slope of domed roof is varied in the large range by its curvature. Also the control of hydration heat and the strength development at test ages are classified with massive section about 1.4 m thick and considered to the pre-stressing work and removal of air support after concrete placing work. Considering above condition, slump range is selected $100{\pm}25$ mm under the slope $20^{\circ}$ and $150{\pm}25$ mm over the slope $20^{\circ}$ s until 60 minutes of elapsed time. Also, the roof concrete is satisfied with compressive strength range including design strength at 91 days (30 MPa), pre-stressing work at 7 days (10 MPa), air support removal work at 21 days (14 MPa). Replacement ratio of limestone powder is determined by confined water ratio test and main design factors include water-cement ratio (W/C), sand-aggregate ratio and dosage of admixture. As test results, the optimum mix proportion of the roof concrete used low heat cement is as followings. 1) Replacement ratio of limestone powder 25% by confined water ratio test 2) Water-cement ratio 57.8% 3) Sand-aggregate ratio 42.0%. Also, test results for the adiabatic temperature rising test is satisfied with its criteria and shown the lower value compared to preceding storage tank (TK-13, 14). These required performances and the optimum mix proportion is to apply the actual construction work.

• Clinical and Experimental Pediatrics
• /
• v.51 no.8
• /
• pp.868-873
• /
• 2008

Purpose : Immunotherapy is accepted as the only treatment of allergic disease that can modify the natural course of the disease and ameliorate symptoms. This study aimed to evaluate the safety and efficacy of ultra-rush therapy using Dermatophagoides extracts in children. Methods : Of children older than four years who had visited Bundang CHA Pediatric Allergy Clinic, those showing positive reactions only to Dermatophagoides in the skin prick test and to the nasal provocation test were included. In all, 11 and 12 patients respectively preferred conventional and ultra-rush immunotherapy. We elevated allergen concentrations diluted to 1,000:1 of the end strength by 2-3 times with 30-minute intervals and checked oxygen saturation, pulse rate, blood pressure, and systemic reactions every 15 minutes. Immunotherapy effectiveness was valued by changes in nasal provocation test scores before and after immunotherapy. Results : The average ages of patients in the conventional and ultra-rush immunotherapy groups were $8.3{\pm}2.3$ and $9.2{\pm}2.8years$, respectively. Systemic reactions were observed in six in the ultra-rush group (50%) without anaphylaxis and one (9%) in the conventional group. The average scores in the nasal provocation test before and after treatment in the conventional group were $8.2{\pm}1.5$ and $4.6{\pm}2.1$, respectively (P=0.043). In the ultra-rush immunotherapy group, the scores changed from $6.2{\pm}2.2$ to $3.7{\pm}2.5$ (P=0.017). Conclusion : Ultra-rush immunotherapy using Dermatophagoides in children is effective for treating allergic disease but can induce systemic effects rather than conventional immunotherapy.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.6
• /
• pp.715-721
• /
• 2007

Residual calcium concentration is high, in general, at the effluent of the fluoride removal process in the electronics industry manufacturing semiconductor and LCD. To increase the stability of the membrane process incorporated for reuse of wastewater, the residual calcium is required to be pre-removed. Hyperkinetic Vortex Crystallization(HVC) process was installed in the electronics industry manufecturing semi conductor as a pilot scale for accelerating calcification of calcium ion. Compared to the conventional soda ash method, the 31% higher calcium removal efficiency was achieved when HVC was applied at the same sodium carbonate dosage. In order to maintain the economic calcium removal target of 70% preset by manufacturer, the dosing concentration of the soda ash was 530 mg/L based on influent flowrate. The seed concentration in the reactor was one of the critical factors and should be maintained in the range of $800\sim1,200mg$ SS/L to maximize the calcium removal efficiency. The calcite production rate was 0.30 g SS/g $Na_2CO_3$ in the average. The economic HVC passing time of the mixture was in the range of $2\sim5$ times. Relatively, stable calcium concentration was maintained in the range of $30\sim72$ mg/L(average 49 mg/L) although the calcium concentration in the feed was severely fluctuated with $74\sim359$ mg/L(average 173 mg/L). The HVC process was characterized as environment-friendly technology reducing chemical dosage and chemical sludge production and minimizing maintenance cost.

• Food Science of Animal Resources
• /
• v.27 no.1
• /
• pp.117-121
• /
• 2007

The number of internet users and the scale of electronic on-line trading are on the increase due to the development of information technology and the internet. The aim of this study was to monitor the accuracy of country-of-origin labels and the indicated contents of meat available by electronic on-line trading by using a structural interview sheet for 100 on-line meat product markets. The result of this investigation showed a 100% level of accuracy for business name and telephone number whereas the company address, meat manufacturer and supplier, and business registration were less reliable. We also investigated the accuracy of site policy, e-mail address, and fax number. The results showed that the accuracy of fax numbers was the lowest. The product name and the kind of meat actually in the product showed a 100% level of conformity, while the price (96.3%), place of origin (93.6%), capacity (90.4%), meat parts (80.9%) and contents of the product (73.4%) showed a relatively low level of conformity. Serious safety issues were exposed by the disturbingly low 20.2% accuracy of indicated expiration dates and 5.3% accuracy of indicated manufacturing dates. To ensure food safety, it is essential to improve consumer understanding and trust regarding food safety through continuous public relations. More education and information are needed to raise consumer awareness of the facts versus myths regarding food safety.

• Journal of Korean Society for Geospatial Information Science
• /
• v.8 no.1 s.15
• /
• pp.51-63
• /
• 2000

Dynamic traffic assignment(DTA) has been a topic of substantial research during the past decade. While DTA is gradually maturing, many aspects of DTA still need improvement, especially regarding its formulation and solution algerian Recently, with its promise for In(Intelligent Transportation System) and GIS(Geographic Information System) applications, DTA have received increasing attention. This potential also implies higher requirement for DTA modeling, especially regarding its solution efficiency for real-time implementation. But DTA have many mathematical difficulties in searching process due to the complexity of spatial and temporal variables. Although many solution algorithms have been studied, conventional methods cannot iud the solution in case that objective function or constraints is not convex. In this paper, the genetic algorithm to find the solution of DTA is applied and the Merchant-Nemhauser model is used as DTA model because it has a nonconvex constraint set. To handle the nonconvex constraint set the GENOCOP III system which is a kind of the genetic algorithm is used in this study. Results for the sample network have been compared with the results of conventional method.

• Korean Journal of Food Science and Technology
• /
• v.44 no.1
• /
• pp.21-27
• /
• 2012

This research was carried out as a survey on the contents of lead, cadmium, and arsenic in processed foods (milk, vegetable oil, and margarine) in Korea. The limits of quantification (LOQs) were Pb 0.3 ${\mu}g/kg$, Cd 0.15 ${\mu}g/kg$, and As 0.45 ${\mu}g/kg$ for milk and Pb 0.61 ${\mu}g/kg$, Cd 0.31 ${\mu}g/kg$, and As 0.91 ${\mu}g/kg$ for vegetable oil and margarine. The recoveries were 92.6-98.0% for Pb, 91.2-98.9% for Cd, and 97.9-104.7% for As. The average levels of Pb were 2.395 ${\mu}g/kg$ for milk, and 7.656 ${\mu}g/kg$ for vegetable oil. The average levels of Cd were 0.483 ${\mu}g/kg$ for milk, and 0.380 ${\mu}g/kg$ for vegetable oil, and levels of As were 0.781 ${\mu}g/kg$ for milk, and 1.241 ${\mu}g/kg$ for vegetable oil. The results of this study showed that Pb, Cd, and As contents in the whole samples were less than the maximum residual levels in the processed foods that were specified by the Codex standard.