• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.377-377
• /
• 2017

다목적댐은 비어있는 저수지 용량을 활용, 상류에서 유입되는 홍수를 저류하여 하류의 피해를 경감시키고, 저류된 저수량을 활용하여 갈수시 생 공 유지용수 등을 목적에 맞게 하류로의 공급에 주요 목적이 있다. 이를 위해 댐 계획에는 상류에서 유입되는 목표 빈도 계획홍수량을 산정하고, 이에 따른 여수로의 계획방류량 등이 포함된 홍수 조절 방안이 수립된다. 다목적댐은 그 중요도 때문에 많은 사회적 재화(財貨)가 투입되어 하천에서 가장 높은 빈도인 200년 빈도 홍수량에 대비하도록 설계되어 있다. 그러나 대부분의 댐 하류 하천에서는 긴 연장에 따른 투자비용 등의 한계로 상류 댐에 미치지 못하는 100년 빈도 이하로 설정되어있다. 이런 상 하류의 홍수계획간 괴리로 댐의 계획 방류량 수준의 홍수 조절시에는 하류 하천에 재난상황으로 발생할 우려가 있다. 기상예보의 고도화로 단기 예보의 정밀도가 높아져 단기간 댐 운영에는 효과적으로 활용되고 있다. 하지만 5일 이후를 예보하는 중 장기예보는 아직까지도 불확실성이 높은 실정이다. 여기에 기후변화 등 기상의 불확실성을 고려하여 홍수기 초 장마와 태풍 등의 영향에 대비하기 위해 무작정 댐을 저(低)수위로 운영하면 이후 여름 가뭄에 취약해 지고, 반대로 저수량 확보의 고(高)수위 운영을 할 경우 연이은 태풍 등 홍수상황에 취약해 지게 된다. 최근 '14~'15년도 낙동강 수계에 여름가뭄으로 안동 임하댐이 가뭄단계에 돌입하는 등 홍수기초 적정 저수량의 확보는 안정적 수자원시설 운영에 중요성이 커지고 있다. 본 연구에서는 이러한 불확실한 기상상황에 대비하고 댐의 이치수 목적 달성을 위해, 홍수기초 가능한 저수량을 확보하되 계획홍수량이 들어와도 하류피해는 경감시킬 수 있는 저수지 수위를 찾고자하였다. 이를 위해 낙동강 수계 9개 다목적댐(안동, 임하, 성덕, 보현산, 군위, 김천부항, 합천, 남강, 밀양댐)을 대상으로 댐 설계 및 직하류 하천 상황을 고려한 "홍수기초 댐 저수량 확보 수위 검토"를 실시하였다. 댐 직하류 하천의 홍수대비 상황 및 홍수조절시 제약사항 등을 조사해 주요지점(Critical Point)을 선정하고 그 지점의 홍수량을 파악한다. 이어서 저류함수 모형을 활용하여 댐별 저수지 모의 운영을 실시하였다. 대상 댐 저수지에 계획홍수량을 유입시키고 수위를 점차 조정하면서 하류 지점의 홍수량 내의 규모로 방류를 하는 저수지 모의 운영을 실시하였다. 이때 저수지의 계획홍수위를 초과하지 않는 등 안정적 홍수조절이 가능한 특정 수위를 찾아 하류 하천 환경을 고려한 댐 운영 수위로 선정하였다. 최근 홍수기총에는 강수량이 계속 줄어들고 홍수기 이후 더 많은 강수가 내리는 등 기후변화로 댐 운영은 날로 어려워지고 있다. 본 연구의 분석 결과는 홍수기초 가뭄 및 장마 또는 태풍 등에 대비하여 댐 운영의 이 치수 두 가지 목적을 달성하는데 참고가 될 수 있을 것이다.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.49 no.2
• /
• pp.113-127
• /
• 2021

Although planning techniques linking parks, green areas, and waterways have become common, there are frequent disruptions in the operation and management of landscape-use artificial channels (LuAC). Therefore, this study examined a design to promote the sustainable management and operation of a LuAC using rainwater for the streamlets of the Jeonju-Wanju Innovative City. In order to accomplish the purpose of this study, scenarios were set up by dividing the design into waterhead and waterway portions. First, the scenario regarding the waterhead was analyzed to calculate the water supply and storage required for the waterway and waterhead. The analysis showed that the waterway requires a water supply of 676.8 tons/months, 3,018 tons to 5,512 tons of storage space, and a water depth of 0.75 m to 1.37 m considering the ecological and landscape aspects. The second scenario is to select an effective system of facilities for the operation and management of the LuAC. To accomplish this, a single-circulation system (SCS), which transports water to a highland location was compared to a multi-circulation system (MCS), which supplied water separately to each water space and operated independently. The results showed that the MCS, which was operated independently by small power units, was more effective owing to the vast difference in water supply operation times.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.56-66
• /
• 2021

In this study, a waste heat recovery system was devised and the performances of components incorporated to recover the heat generated during the processing of aerobic liquid-composting in a livestock manure treatment facility were analyzed. In addition, the availability of recovered heat was confirmed. The heat generated by liquid fermentation in the livestock manure treatment facility was also checked. Experimental temperatures were set at 35, 40, and 45 ℃ based on considerations of the uniformity of aerobic liquid-composting fermentation tank temperature and its operating range (34.5 ~ 43.9 ℃). Recovered heat energies from the combined heat exchanger, which consisted of PE and STS pipes, were 53.5, 65.6, 74.4 MJ/h, The heat pump of capacity 5 RT was heated at 95.6, 96.1, 98.9 MJ/h and the heating COPs of the pump were 4.53, 4.62, and 4.65, respectively. The maximum hot water production capacity of the heat exchanger assuming a fermentation tank temperature of 45 ℃ confirmed an energy supply of 56 360 kcal/day. The heating capacity of the FCU linked to the heat storage tank was 20.8 MJ/h, and the energy utilization efficiency was 96.1%. When livestock manure was dried using the FCU, it was confirmed that the initial function rate was reduced by 50.5 to 45.8 % after drying.

• Journal of Korea Water Resources Association
• /
• v.51 no.12
• /
• pp.1171-1180
• /
• 2018

Korea's water transmission system is operated by the nonpressure flow method that flows from highlands to lowlands due to the nature of Korea with many mountainous areas. In order to store water in the highlands, the water pumps are installed and operated. However, In this process, a lot of electrical energy is consumed. therefore, it is necessary to minimize the energy consumption by optimizing the size and operation schedule of the water pumps. The optimal capacity and operation method of the water pump are affected by the size of the tank (distributing reservoir). Therefore, in order to economically design and operate the water transmission system, it is reasonable to consider both the construction cost of the water pump and the tank and the long-term operation cost of the water pump at the step of determining the scale of the initial facilities. In this study, the optimum design model was developed that can optimize both the optimal size of the water pump and the tank and the operation scheduling of the water pump by using the genetic algorithm (GA). The developed model was verified by applying it to the water transmission systems operated in Korea. It is expected that this study will help to estimate the optimal size of the water pump and the tank in the initial design of the water transmission system.

• Journal of Korea Water Resources Association
• /
• v.54 no.8
• /
• pp.567-576
• /
• 2021

Climate change threatens the security of domestic water resources in South Korea. To overcome the potential water shortage, various approaches are being studied by alterning the operation of dams or by integrated operation of multiple dams and reservoirs. However, most of the related researches were developed and applied for multi-purpose dams, and few studies were conducted for the hydropower dams. The main purpose of the hydropower dam is to generate electric energy; however, the potential water shortage due to prolonged droughts brings the idea to supply water from the hydropower dam in the basin. To that end, it is required to estimate the water supply ability of the hydropower dams. In this study, we proposed a methodology to classify the hydropower dam into a "storage-type" and "run-of-river type" dam. The proposed approach was demonstrated using the hydropower dams located in North-han River basin. The results of this study are expected to contribute for further analysis of the hydropower dams, such as evaluation of water supply capacity and drought mitigation purpose operation of the hydropower dams.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.35 no.2
• /
• pp.93-100
• /
• 2022

The collision behaviors of the tripod and jacket structures, which are considered as support structures for offshore wind towers at the Southwest sea of Korea, were compared by nonlinear dynamic analysis. These structures, designed for the 3 MW capacity of the wind towers, were modeled using shell elements with nonlinear behaviors, and the tower structure including the nacelle, was modeled by beam and mass elements with elastic materials. The mass of the tripod structure was approximately 1.66 times that of the jacket structure. A barge and commercial ship were modeled as the collision vessel. To consider the tidal conditions in the region, the collision levels were varied from -3.5 m to 3.5 m of the mean sea level. In addition, the collision behaviors were evaluated as increasing the minimum collision energy at the collision speed (=2.6 m/s) of each vessel by four times, respectively. Accordingly, the plastic energy dissipation ratios of the vessel were increased as the stiffness of collision region. The deformations in the wind tower occurred from vibration to collapse of conditions. The tripod structure demonstrated more collision resistance than the jacket structure. This is considered to be due to the concentrated centralized rigidity and amount of steel utilized.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.2
• /
• pp.1-14
• /
• 2021

The exclusive bus lanes in the Yeongdong Expressway were implemented in the Singal to Yeoju section in 2017, but the capacity of both exclusive bus lanes and general-purpose lanes of the Yeongdong Expressway decreased and the travel time increased, reducing it to the Singal to Deokpyeong section. Therefore, it is necessary to increase the efficiency of exclusive bus lanes to revitalize public transportation and improve environmental problems. This study calculated the willingness to pay and the social benefits of permission for Green cars to drive on exclusive bus lanes in Yeongdong Expressway. A survey was conducted on two groups of Green car users and Expressway users, and the willingness to pay was estimated using the CVM method. As a result, the average WTP of Green car users were estimated to be 218.7(won/km·person), and that of Expressway users were estimated to be approximately 235.5(won/km·person). The direct benefits were estimated to be approximately 7.9 billion won for Green car users, and 8.5 billion won for Expressway users in 2019. Finally, the value of time saving was estimated to be approximately 8.0 billion won.

• Journal of Korean Society of Disaster and Security
• /
• v.16 no.1
• /
• pp.61-70
• /
• 2023

This study presents an analytical study of investigating the effect of shock waves generated by the hydrogen detonation and damage to structures for the safety evaluation of hydrogen storage facilities against detonation. Blast scenarios were established considering the volume of the hydrogen storage facility of 10 L to 50,000 L, states of charge (SOC) of 50% and 100%, and initial pressures of 50 MPa and 100 MPa. The equivalent TNT weight for hydrgen detonation was determined considering the mechanical and chemical energies of hydrogen. A hydrogen detonation model for the converted equivalent TNT weight was made using design equations that improved the Kingery-Bulmash design chart of UFC 3-340-02. The hydrogen detonation model was validated for overpressure and impulse in comparison to the past experimental results associated with the detonation of hydrogen tank. A parametric study based on the blast scenarios was performed using the validated hydrogen detonation model, and design charts for overpressure and impulse according to the standoff distance from the center of charge was provided. Further, design charts of the three-stage structural damage and standoff distance of adjacent structures according to the level of overpressure and impact were proposed using the overpressure and impulse charts and pressure-impulse diagrams.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.33-33
• /
• 2021

예측하기 어려운 복잡한 기후 변화로 인해 수자원 관리측면에서 다양한 방법을 도입하여 해결할 수 있는 방안이 국가적 주요 관심사로 다루어지고 있다. 따라서 투입인력과 소요시간 절감, 장비와 인력진입 불가지역에 대한 정보획득, 높은 공간해상도, 항공측량 대비 높은 경제성 등 다양한 장점의 드론을 이용한 하천지형 특성별 수리특성 분석방안이 필요하다. 본 연구에서는 성연천 하류부지역을 대상으로 위성항법시스템(Global Navigation Satellite System, GNSS) 측량 지형성과와 드론측량(Drone) 지형성과를 지상에 설치된 CHP(Check Point) 좌표 값을 확인하여 두 지형의 정확도를 비교하였으며 HEC-RAS 모형을 이용하여 빈도별 수리특성을 비교 산정하였다. 본 연구는 성연천 하류 480m구간을 선정하고 GNSS를 이용한 실측지형자료와 GCP(Ground Control Point)를 얻기 위해 정확도 검증을 실시하였으며 위성항법시스템(GNSS) 측량과 DRONE RGB측량의 CHP(Check Point) 오차를 비교하여 정확도를 검증하였다. 오차 값이 확인된 위성항법시스템(GNSS)을 이용하여 가상기준점을 선정하고 RTK 모바일스테이션을 설치하여 DRONE LIDAR측량을 통해 지형자료를 취득하였으며 얻어진 지형자료를 HEC-RAS를 통해 입력 후 성연천 하천기본계획에 제시되어진 조도계수와 빈도별 홍수위를 적용하여 연구구간 480m에 대해 100년 빈도의 결과 값을 비교 검토하였다. 100년 빈도 계획 홍수량 조건의 하상과 한계수위의 차에서 위성항법시스템(GNSS) 측량 지형자료를 기준으로 평균수위 측정오차는 드론 RGB 측량 지형자료 0.460m, 드론 LIDAR 측량 지형자료 0.260m의 결과를 얻었으며 동일 조건 흐름하의 평균유속에서 위성항법시스템(GNSS) 측량 지형자료를 기준으로 평균유속 측정오차는 드론 RGB 측량 지형자료 0.40m/s, 드론 LIDAR 측량 지형자료 0.36m/s의 결과를 얻었다. 통수 단면적의 비교 결과는 위성항법시스템(GNSS) 측량 지형자료를 기준으로 드론 RGB 측량 지형자료 전체 단면의 평균오차는 20.20m², 드론 LIDAR 측량 지형자료 전체 단면의 평균오차는 21.68²의 결과를 얻었으며 이상에서와 같이 홍수위와 평균유속, 통수 단면적의 측정오차 비교 결과를 종합할 때 통수 단면적 측정결과는 위성항법시스템(GNSS) 측량과 드론 RGB 측량의 차이가 적었으나 계획 홍수량 조건의 하상과 한계수위 차이와 동일조건 흐름하의 평균유속에서 위성항법시스템(GNSS) 측량과 드론 LIDAR 측량의 차이가 적은 것으로 나타났다. 그리고 통수용량(capacity)(m³) 비교에서는 위성항법시스템(GNSS) 측량을 기준으로 드론 RGB 측량은 약 7644m³, 드론 LIDAR 측량은 약 7547m³의 차이를 보여 드론 LIDAR를 이용한 결과가 가장 정확한 측정방법으로 추천할 수 있음을 확인하였다.

• The Journal of Bigdata
• /
• v.6 no.2
• /
• pp.17-28
• /
• 2021

Current development of technologies related to 4^th industrial revolution and the pandemic of COVID-19 lead the rapid expansion of e-marketplace. The level of competition among several companies gets increased by introducing different strategies. To cope with the current change in the market and satisfy the customers who request the better delivery service, the new concept, fulfillment, has been introduced. It makes the leadtime of process from order picking to delivery reduced and the efficiency improved. Still, the efficiency of operation in fulfillment centers constrains the service level of the entire delivery process. In order to solve this problem, several different approaches for demand forecasting and coordinating supplies using Bigdata, IoT and AI, which there exists the trivial limitations. Because it requires the most lead time for operation and leads the inefficiency the process from picking to packing the ordered items, the logistics service providers should try to automate this procedure. In this research, it has been proposed to develop the efficient plans to automate the process to move the ordered items from the location where it stores to stage for packing using AGV and AMR. The efficiency of automated devices depends on the number of items and total number of devices based on the demand. Therefore, the result of simulation based on several different scenarios has been analyzed. From the result of simulation, it is possible to identify the several factors which should be concerned for introducing the automated devices in the fulfillment centers. Also, it can be referred to make the optimal decisions based on the efficiency metrics.