• Proceedings of the Korean Society of Computer Information Conference
• /
• 2014.01a
• /
• pp.383-384
• /
• 2014

본 논문에서 제시된 배전 선로용 자계 검출 센서는 비접촉형이며, 페라이트 코어로 구성되어 있다. 시편 코어의 권선수 및 길이의 변화에 따른 특성을 조사한 결과 탐색 코일의 권선수가 5,000턴이고 이격 거리가 6[cm] 이내에서 활선 여부를 검출할 수 있었으며, 전선과의 이격 거리에 대해서 자계의 세기가 제곱에 반비례로 감소하는 것을 확인할 수 있었다.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2362-2364
• /
• 2001

스위치입력, AC, Relay, TR출력 등을 필요로 하는 반도체 장비 등의 산업용기계에는 PLC나 PC IO card를 많이 이용하고 있으나 이런 장치들은 각기 단점을 가지고 있다. 본 논문에서는 이런 장치들의 단점을 극복하면서, 장치의 주제어기로 많이 활용되며, PC에 통합되어 사용될 수 있으며 배선의 길이를 크게 줄일 수 있는 USB 포트를 이용한 산업용 IO제어기의 개발내역과 실험결과를 제시한다. 본 논문에서 개발한 제어기는 사용이 편리하면서, 가격 경쟁력이 있고 배선 절감효과가 크다.

• The korean journal of orthodontics
• /
• v.36 no.1 s.114
• /
• pp.55-62
• /
• 2006

Orthodontic mini-implants, despite its usefulness as anchorage, have some limits such as loosening. Therefore, various shapes and lengths have been studied. The aim of this study is to analyze the shape and length of mini-implants mechanically. The shapes of mini-implants (1.6 mm, Dual Top, Jeil Medical Co., Seoul, Korea) were cylindrical and taper. The lengths of mini-implants were 6 mm and 8 mm. The tested groups were 5 groups (cylindrical 6 mm, cylindrical 8 mm, taper 6 mm, taper 8 mm and taper 8 mm modified whose thread is reduced from the middle to upper part). All were inserted and removed on the polyurethane foam with the torque measured. During insertion and removal, the taper shape needed higher torque than the cylindrical shape, and the 8 mm length than the 6 mm length (p<0.001). The taper 6mm group showed superior insertion torque (p<0.001) and similar removal torque to the cylindrical 8 mm group. The taper 8 mm modified group with gradually reduced threads, showed continuous high removal torque after the peak. The initial mechanical stability can be provided by the tapered shape and also, affected by length and thread design.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2002.05a
• /
• pp.361-365
• /
• 2002

최근 고감성 PET 사를 이용하여 생산한 PET 직물은 고감성 의류용 직물로서 많이 사용되고 있다. 이러한 고감성 의류용 PET 직물은 다양한 공정을 거치면서 장력이나 열 등의 영향을 받으므로서 사의 물성의 변화를 초래하여 감성 의류용도의 PET 직물에 많은 결점을 유발 시키므로서 직물 생산 시 공정조건 설정 등의 어려움에 직면하고 있다. 이러한 고감성 의류에 치명적인 문제를 유발하는 문제점에 관한 감성사 제조 시의 공정조건 변화와 관련된 연구 논문은 많이 발표가 되지 못하고 있다. 따라서 본 연구에서는 국내 7개 원사 Maker의 Denier 별 PET 사의 물성을 균일한 길이의 Layer를 설정하여 분석, 조사하고 Layer 별 물성 차이와 습ㆍ건열 열처리 온도에 따른 사의 수축률 등을 비교하므로서 감성 의류용 직물 생산에 필요한 기초 물성 Data를 제공하고 PET 사의 품질향상을 도모하므로서 최종 감성 의류용 직물 소재 개발에 기여할 수 있는 기초자료를 제공하고자 한다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.3
• /
• pp.387-394
• /
• 1985

본 연구에서는 액체막의 분산현상에 관한 기존의 연구결과들을 토대로 하여 주위 기체의 응축이 액체막의 분산현상-즉, 분산기구와 액체막의 길이(breakup length )에 미치는 영향을, 여러 형태의 노즐에서 분사되는 액체막의 유속과 온도를 변화시켜 가면서, 알아보고자 한다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.06a
• /
• pp.341-342
• /
• 2007

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.945-946
• /
• 2010

• Journal of the Korean Society for Railway
• /
• v.20 no.2
• /
• pp.257-264
• /
• 2017

The PC (Precast Concrete) construction method is a technique where concrete members that have been produced in a plant are constructed on site. Thus, continuity and secure integration of a structure that can be obtained by connecting rebars at splicing joint for PC members are the main areas of concern for this method. To evaluate the splicing and bonding performance according to application of a splice sleeve for connecting rebar in this research study, the diameter of rebar, development length, grouting strength etc. were set as variables. The performance and stiffness of splicing according to the development length of grout strength were measured and evaluated. In addition, by conducting comparative analysis on each of the variables, the factors that affected the splice sleeve for connecting rebar were discussed. The results confirmed that the strength and stiffness of the splice sleeve for connecting rebar were significantly affected by the development length while the increase in performance according to grout strength was not as significant.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.2 no.3
• /
• pp.10-16
• /
• 1991

The error networks due to the measuring systems and the test fixture must be previously calibrated in order to characterize the microwave devices. In this paper, it is presented a new method to characterize the error networks in which only two different microstrip lines are used for the calibration. Once each length of two calibrat- ing microstrip lines is accurately defined, the calibrated data can be easily obtained without acknowledgement for the propagation constant. The end effect is not considered when fabricated the microstrip lines used to calibration. The ATF13736 GaAs MESFET is characterized by means of the calibrating procedure with this method. The range of measuring frequency is 2 to 18 GHz, and the bias voltage and current are $V_{DS}$ =2.5V, $I_{DS}$ =20mA, respectively. Compared the calibrated data with data sheet, it is showed that the magnitude is nearly agreed with each other and the phase is deviated by 0.1 to 12 degrees in lower frequencies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.15-20
• /
• 2017

The main purpose of the ball valve ball is to be moved by the rotation of the stem when fully open or completely closed. In this study the heat of the initial model, which used a structure interaction analysis technique, tried to examine the structural safety of the high temperature for the ball valve. In the initial model the stress of the exiting sheet was more than the yield strength. We selected two design shapes with variables of length and thickness for the optimization of the sheet. The Kriging interpolation method was applied to a meta-model-based optimization technique. As a result, it was possible to find a thickness and length for the sheet within the yield strength. This was done by measuring the value of the capacity coefficient of the valve and evaluating the performance of the ball valve.