• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.86-86
• /
• 2011

첨단 공정이 필요한 반도체와 LCD, PDP, LED 등의 디스플레이 및 IT 부품을 제조하는데 필요한 장비의 고성능화와 작업환경의 고청정화에 따른 초고진공펌프의 수요 확대와 앞으로 전개될 한-미 FTA에 따른 시장 확대로 인해 크라이오펌프의 국산화가 시급한 실정이다. 고성능 크라이오펌프를 만들기 위해서는 냉각판을 극저온으로 냉각하기 위한 극저온 냉동기 개발도 중요하지만 냉각판(cryoarray)에 최대한 많은 분자를 포획시키는 것 또한 최우선적으로 고려되어야 할 사항 중 하나이다. 이에 본 논문은 크라이오펌프용 냉각판의 기체분자 포획능력에 대하여 연구하였다. 냉각판의 분자포획능력의 해석은 형상계수법(view factor method)을 이용해 수행하였다. 해석에 이용한 냉각판은 현재 상용화된 모델들 중 원형 중앙판에 45$^{\circ}$ 하향 skirt가 달린 형태이며 8장의 냉각판이 일정한 간격을 두고 아래쪽으로 적층되어있고 이를 기본 모델로 하여 skirt의 형상이 다른 3장의 냉각판을 가진 네 가지 모델을 해석하였다. 해석에 이용한 냉각판의 기체분자 포획능력이 구속된 형상에서 얼마나 우수한가를 알아보기 위해 크라이오펌프의 입구 직경과 냉각판 중앙 원판의 직경비, 냉각판 사이의 거리, 그리고 skirt의 길이를 변화시켜가며 극저온 냉각판에 직접 응축되는 typeII가스와 흡착제가 도포된 부분에 의해 흡착되는 typeIII가스로 분류하여 해석을 수행하고 그 결과를 비교, 분석하였다. 크라이오펌프의 입구 직경과 냉각판 중앙 원판의 직경비가 증가함에 따라 typeII가스와 typeIII가스 모두 기체분자 포획능력이 증가하며 극저온 냉각판 사이 거리의 변화에 따른 기체분자 포획능력은 typeII가스의 경우 극저온 냉각판 사이의 거리가 증가할수록 증가한다. 하지만 typeIII가스는 모델 A, C의 경우 증가하고 모델 B, D의 경우 증가하다가 다시 약간 감소한다. skirt 길이 변화에 따른 기체분자 포획능력은 두 가스 모두 skirt 길이가 증가함에 따라 점점 급격하게 증가하고 모델 B, D는 나머지 두 모델에 비해 큰 값을 갖는다. 기체분자 포획능력을 해석한 결과를 실제 배기속도와 비교할 경우 절대적 수치로써의 비교는 어려우나 각 모델의 형상의 차이에 의한 상대적인 비교는 가능하다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.8
• /
• pp.497-503
• /
• 2017

A theoretical study on oxygen flow is fundamental to comprehend the practical production of an oxygen respirator and its stability. In this study, an orifice-type pressure-reducing component was designed for the newly developed oxygen respirator, using the commercial CFD tool, COMSOL Multiphysics, which increases its operational time compared to the existing component. The orifice was optimized by changing the length by 3, 6, and 9 mm within the entire computational domain of the oxygen respirator. Based on an oxygen flow rate of 0.028 kg/s, the oxygen respirator equipped with the newly developed orifice satisfied the flow rate within 33% for a respirator inlet pressure of 300 bar, and within 32.7% for 50, 75, and 100 bar. In terms of component manufacturing, the orifice length was selected as 3 mm, which removes additional changes to the existing component.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.8
• /
• pp.751-758
• /
• 2009

Failure strengths of composite single-lap adhesive joints were investigated with various parameters such as manufacturing method, overlap length and adherend thickness. A total of 335 single-lap joint specimens were tested under tension. Specimens were fabricated with 4 different manufacturing processes; cocuring without and with adhesive, secondary bonding and co-bonding. Each manufacturing process has 5 different overlap lengths and 4 different thicknesses, respectively. As expected, failure strength is higher in thicker adherend joints and lower in larger overlap length specimens. Interesting result is that the secondary bonded joints show the higher strength than the cobonded and cocured joints with adhesive, and give close or even higher strength compared with non-adhesive cocured case.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2020.08a
• /
• pp.28-28
• /
• 2020

본 연구는 식용, 목재용, 가구용 등 유용한 상수리나무의 효율적인 양묘를 위한 기초 정보를 제공하기 위하여 용기의 종류에 따른 유묘 생장을 측정하고 조사하였다. 용기별 유묘의 엽수는 15구가 18.6개로서 24구의 18.5개보다 많았고, 엽건물중은 15구가 2.41g으로서 24구의 2.24g보다 가벼웠다. 줄기길이는 15구가 33.5cm로서 24구의 34.6cm보다 짧았고, 줄기직경은 15구가 4.48mm로서 24구의 4.77mm보다 좁았으며, 줄기건물중은 15구가 1.40g으로서 24구의 1.53g보다 가벼웠다. 뿌리길이는 15구가 39.2cm로서 24구의 49.1cm보다 짧았고, 뿌리건물중은 15구가 7.60g으로서 24구의 6.92g보다 무거웠다. 그리고 식물체건물중은 15구가 11.4g으로서 24구의 10.7g보다 무거웠다. 지상부와 지하부 (S/R) 비율은 15구가 0.50으로서 24구의 0.55보다 낮았다. 이와 같이 재배 용기의 크기에 따른 상수리나무 유묘의 생장은 여러 생장 측정 중 뿌리길이를 제외하면 T-검정에서 차이를 나타내지 않았다. 이렇게 보면 상수리나무는 용기 크기와 유묘 생장의 상관관계가 없다고 할 수 있으나 본 실험에서 노천매장 종자의 파종상 유묘를 선별하여 이식할 때 물리적 손상이 있을 수 있어 추후 추가적인 보완 실험이 필요하였다.

• Resources Recycling
• /
• v.28 no.6
• /
• pp.54-63
• /
• 2019

This study investigated on the compressive strength and the length change test with using the waste glass and graphene oxide for recycling the waste glass as the aggregate. Curing on 3-day and 7-day, the compressive strength was enhanced as the usage of waste glass was increased. Especially, the huge difference in the compressive strength was observed when the amount of substituting on the waste glass was used on 10~50%. With 50% of waste glass condition, the compressive strength was portionally enhanced as the usage of graphene oxide was increased and its value was 42.6 N/㎟ with 0.2% of graphene oxide. In terms of the length change test, the use of high content of waste glass led length change value to increase, but it was dropped down as the portion of waste glass was above 50%. Furthermore, in the case of using 50% of waste glass, the use of high amount of graphene oxide tended to decrease the length change value. That is, graphene oxide may contribute on boosting the cement hydration reaction and blocking the ion's movement.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.3
• /
• pp.52-59
• /
• 2016

COSMOS system which was developed in Seoul for real-time signal control was designed to judge traffic condition for practicing signal operation. However, it occurs efficiency problem that stop line detection and queue length detection could not judge overflow saturation of street. For that reason, following research process GPS data of Seoul city's corporationowned taxi to calculate travel speed that excluded existing system of stop line detection and queue length detection. Also, "Research of calculating queue length by GPS data" which was progressed with following research expressed queue length. It is based on establishing algorithm of judging congestion situation. The algorithm was applied to a few areas where appeared congestion situation consistently to confirm real time traffic condition with established network. [Entrance of the National Sport Institute ${\rightarrow}$ Gangnam station Intersection, Yuksam station intersection ${\rightarrow}$ National Sport Institute.

• The Journal of Engineering Geology
• /
• v.15 no.3
• /
• pp.269-280
• /
• 2005

We assigned points on surface of standard roughness profile by 0.1mm along the length and measured coordinates of points. Then, the lengths of profile were measured with different scales using modified divider method. The fractal dimensions and intercepts of slopes were determined by plotting the length vs scale in log-log scale. The fractal dimensions as well as intercepts of slopes show well correlation with joint roughness coefficients(JRC). However, multiplication of the kactal dimension by intercept show better correlation with IRC and we derived a new equation to estimate JRC from fractal dimension and intercept. The crossover length in which we can determine the correct fractal dimension was between 0.3-3.2mm. We measured joint roughness of 26 natural joints and calculated JRC using the equation suggested by Tse and Cruden(1979) and new equation derived by us. IRC values calculated by both equations are almost the same, indicating new equation is effective in measuring IRC.

• Fire Science and Engineering
• /
• v.28 no.1
• /
• pp.20-25
• /
• 2014

Steel column is very important an structural element in steel framed building and plays a key role in sustataining the applied external load. Generally, the fire resistance performance of steel column has been executed by application of fire standard and vertical furnace having a limitation in height. Therefore, the fire resistance test was conducted with a H-section column having 3500 mm in length and hinge to hinge boundary condition. And the fire protective material derived from the fire test can be applied to any kind of boundary conditions and lengths. However, it is hard to determine the fire resistance. In this paper, to make sure the structural stability of them at high temperature according to various boundary conditions and lengths of H-section column, an analysis was done by using the mechanical properties and an heat transfer theory.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.8
• /
• pp.9-16
• /
• 2000

MOS transistors are fabricated and evaluated for RF IC applications such as mobile communication systems using 0.35m CMOS process. Characteristics of MOSFETs are analyzed at various channel length, width and bias conditions. From the analysis, cut-off frequency ($f_T$) is independent on channel width but maximum oscillation frequency ($f_{max}$) tends to derease as the channel width increases. As channel length increases, $f_T$ and fmax decrease. $f_T$ is 22GHz and fmax is 28GHz at its maximum value. High frequency noise performance is improved with larger channel width and smaller channel length at same bias conditions. NFmin at 2GHz is 0.45dB as a minimum value. From the evaluation, MOSFETs designed using 0.35m CMOS process demonstrated a full potential for the commercial RF ICs for mobile communication systems near 2GHz. And optimization methods of the CMOS transistors for RF applications are presented in this paper.

• FLOWER RESEARCH JOURNAL
• /
• v.17 no.4
• /
• pp.256-261
• /
• 2009

This study was carried out to examine the effects of cutting condition on the rooting and their subsequent growth of cut flower in plug cutting of summer-flowering chrysanthemum 'Iwanohakusen'. The more leaves were attached to the cutting, the higher shoot growth and rooting were. Shoot growth of cuttings was not affected by cutting length, but rooting was better in over 5 cm long cutting. Shoot growth was enhanced by increasing thickness of cutting, and 5.5 mm thick cutting was favored in rooting. When the many leaves were attached on the cutting, the length and weight of cut flower increased. Over 7 cm long cutting showed higher values in growth of cut flower and ray flower number. Cutting of 5.5 mm diameter showed more favorable growth of cut flower than the other treatments. Therefore, it is concluded that rooting of cutting and consecutive growth of cut flower was improved when 7 cm long and 5.5 mm diameter cutting with 4 leaves was used in plug cutting of chrysanthemum 'Iwanohakusen'.