• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.3
• /
• pp.289-301
• /
• 2010

A structural model of the SNF(spent nuclear fuel) disposal canister for the PWR(pressurized water reactor) for about 10,000 years long term deposition at a 500m deep granitic bedrock repository has been developed through various structural safety evaluations. The SNF disposal baskets of this canister model have the array type of which four square cross section baskets stand parallel to each other and symmetrically with respect to the center of the canister section. However whether this developed structural model of the SNF disposal canister is best is not determinable yet, because the SNF disposal canister with this parallel array has a limitation in shortening the diameter for the weight reduction due to the shortest distance between the outer corner of the square section and the outer shell. Therefore, the structural safety evaluation of the SNF disposal canister with the rotated basket array which is also symmetric with respect to the canister center planes is very necessary. Even though such a canister model has not been found as yet in the literature, the structural analysis of the canister with the rotated basket array for the PWR is required for the comparative study of the structural safety of canister models. Hence, the structural analysis of the canister with the rotated basket array in which each basket is rotated with a certain amount of degrees around the center of the basket itself and arrayed symmetrically with respect to the center planes is carried out in this paper. The structural analysis result shows that the SNF disposal canister with the rotated basket array in which the SNF disposal basket is rotated as 30~35 degrees around the center of the basket itself is structurally more stable than the previously developed SNF disposal canister with the parallel basket array.

• Nuclear Engineering and Technology
• /
• v.27 no.2
• /
• pp.269-279
• /
• 1995

가압경수로에서 증기발생기와 같은 주기기를 원자로 내부에 위치하도록 설계한 원자로를 일체형 원자로라고 분류하며, 기존 상용원자로와 같이 모든 주기기가 별도의 압력용기로 설계되어 배관계통에 의해 원자로 외부에 순환회로를 갖는 형태의 원자로를 분리형원자로라고 한다. 최근에 개발되고 있는 한 부류의 신형원자로에서는 원자로 및 계통의 단순성 추구와 계통의 높은 신뢰성으로 안전성 향상을 위해 동력원 사용 등의 능동적 안전개념 보다는 자연현상을 이용하는 피동안전개념이 널리 도입되고 있다. 본보고서에서는 이러한 신형원자로의 노형으로서 일체형원자로의 특성을 전통적인 분리형원자로와 비교, 분석, 평가하였다. 일체형원자로의 가장 큰 장점은 모든 주기기가 단일 압력용기 내에 위치하므로 일차계통이 매우 단순하고 대구경 배관이 없기때문에 대형 냉각재 상실사고가 근본적으로 방지되어 안전계통이 매우 단순하다는 것이다. 이 외에도 일체형원자로는 대단히 많은 일차냉각재 용량, 매우 큰 가압기 용량및 긴 운전원 조치시간등의 설계특성을 보유하고 있어 안전성이 탁월하다는 장점을 지니고 있다. 그러나, 일체형원자로는 모든 주기기가 단일 압력용기 내에 설치되므로 대형 원자로 용기가 요구되며, 원자로 압력용기의 제작성 및 운송 능력이 원자로의 용량을 제한하는 주된 요인이 된다. 일체형원자로의 활용으로 열병합 발전, 지역난방 및 선박용 원자로등의 중소형 원자로에 매우 적합하다고 판단되며, 뛰어난 안전성으로 인하여 사회적 수용성 이 강조되는 상용발전로로서도 적합한 노형이 될 수 있을 것으로 분석되었다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.3
• /
• pp.1057-1062
• /
• 1991

본 연구에서는 형상을 미소하게 변화시켜 좌굴을 방지할 수 있는 최적 도움형 상을 설계하였고 타원형, 토리-구형도움의 가장 얕은 형태의 최적도움형상도 설계하였] 으며, 실제 적용예를 수치로 제시하였다. 또한 수압(hydrostatic pressure)을 받는 수조(reservoir)의 도움형상에 대해서도 직경 및 길이 변화에 따른 형상설계 결과를 제시하였다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.1
• /
• pp.37-49
• /
• 2012

A structural model of the SNF(spent nuclear fuel) disposal canister for the PWR(pressurized water reactor) for about 10,000 years long term deposition at a 500m deep granitic bedrock repository has been developed through various structural safety evaluations. The SNF disposal baskets of this canister model have the array type whose four square cross section baskets stand parallel to each other and symmetrically with respect to the center of the canister section. However, whether this developed structural model of the SNF disposal canister is optimal is not determinable yet. Especially, there is still a problem in weight-reduction of the canister. The cross section shape of the SNF basket should be changed to solve this problem. There are two ways in changing the cross section shape of the SNF basket; the one is to rotate the cross section itself and the other is to change the cross section shape as other shape different from the square cross section. The previous study shows that the canister with $30{\sim}35^{\circ}$ rotated basket array is structurally more stable than the canister with un-rotated parallel basket array. However, whether this canister with rotated basket array is optimal is not either determinable as yet, because it is not revealed that the canister with other cross section different from the square cross section is structurally more stable than other canisters. Therefore, the structural analysis of the SNF disposal canister with other cross section shape which is also symmetric with respect to the canister center planes is very necessary. The structural analysis of the canister with various cross section shape basket array in which each basket is arrayed symmetrically with respect to the center planes is carried out in this paper. The structural analysis result shows that the SNF disposal canister with circular cross section shape baskets located symmetrically with respect to the center of the canister section is structurally more stable than the previously developed SNF disposal canister with the parallel basket array.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.2
• /
• pp.155-169
• /
• 2007

A transport container for a 500 kCi tritium storage vessel was developed, which could be used for the transport of metal tritide from Wolsong TRF facility to a disposal site. The structural, thermal, shielding, and confinement analyses were performed for the container in a view of Type B. As a result of structural analysis, the developed container sustained its integrity under normal and accidental conditions. The maximum temperature increase of the inner storage vessel by radiation was evaluated at $134.8^{\circ}C at room temperature. In $800^{\circ}C$ fire test, The thermal barrier of container sustained the inner vessel at $405^{\circ}C after 30 min, which temperature was allowable for the container integrity since maximum design temperature of inner vessel was $550^{\circ}C. In the evaluation of the shielding, the activity of radiation was nearly zero on the outer surface of inner vessel. Consequently the transport container for a 500 kCi tritium was evaluated to pass all the safety tests including accidental condition, so it was concluded that the designed transport container is proper to be used.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.352-352
• /
• 2004

산화물 형태의 사용후핵연료를 고온 용융염계에서 금속 형태로 전환하는 전기화학적 금속전환 공정 개발의 일환으로 $U_3O_8$ 분말로 충전된 다공성 마그네시아 용기 및 스테인레스강 고체전극으로 구성된 일체형 음극과 $SnO_2$ 재질의 양극을 사용하여 5kg $U_3O_8$/batch 규모의 mock-up 시험을 수행하였다. 백금 재질의 양극을 사용하였을 때 99% 이상의 금속전환율을 보인 동일한 전하량을 공급하고 실험을 중단한 결과 X-선 회절분석(XRD) 및 열중량 분석(TG)으로부터 스테인레스강 고체전극 부분에서는 거의 금속으로 전환되었으나 다공성 마그네시아 용기 부분에서는 비교적 금속전환율이 낮은 경향을 나타내었다.(중략)

• Journal of the Korean Institute of Gas
• /
• v.5 no.2 s.14
• /
• pp.22-29
• /
• 2001

The number of gas containers and the period of exchanging gas containers are vsy important in designing liquefied petroleum gas(LPG) supply system for small capacity domain. And also the evaluation of remaining LPG in containers to be exchanged is very useful information in commerce. However seldon has been studied on calculating method about those with respect to gas consumption pattern. In this study, a simulation method was developed to estimate the evaporation capacity of LPG container, the mass gas flow rate from LPG container, the temperature and vapor pressure of LPG, and the remained LPG at containers to be exchange by using LPG property equations, mass balance equation, and heat balance equation. The simulation results were correlated well with experimental data. The overall heat transfer coefficient from air to LPG is approximately $9{\~}13 kcal/m^2{\cdot}hr{\cdot}^{\circ}C$ and does not strongly affect on the evaporation capacity of LPG container. The mass gas flow rate from LPG container is constant when the vapor pressure of LPG is within pressure regulator's control range. While, out of range, it suddenly reduce to a evaporation rate which is balanced with heat transfer from air. The evaporation capacity of LPG container increased with surrounding temperature and the composition of propane, and decreased drastically with continuous gas consumption. The number of gas containers divided the number of houses using gas supply system was reduced by using automatic gas feeding device.

• Journal of Korean Society of Forest Science
• /
• v.101 no.2
• /
• pp.317-323
• /
• 2012

This study was performed in order to explore the growth characteristics by growing stage in the containerized seedling and the bare root seedling of Chamaecyparis obtusa Sieb. et Zucc., which is the major plantation species of Korean southland. The height growth of 1-year-old bare root seedlings was better than containerized seedlings, which grew in the containers with capacity of 31.2 mL and 300 mL. The root collar diameter growth was the best in the containerized seedlings of container with 300 mL. The 2-year-old bare root seedlings were surveyed to be better in the height and root collar diameter growth than the containerized seedlings of container with 300 mL. In the comparison of dry mass production, it was the highest in 32 mL containerized seedlings as for 1-year-old above ground and in 300 mL containerized seedlings as for below-ground and total dry mass production. In case of 2-year-old seedlings, it was indicated to be high in bare root seedling as for the part above ground and in dry mass production of the containerized seedling as for the part below ground. In the comparison on root morphological traits of seedlings such as the total root length, the root project area, the root surface area, the average diameter in root, and the root volume, all of 1 and 2-year -old containerized seedlings showed the higher growth than the bare root seedlings except the average diameter in root. Synthesizing the results of this experiment, the containerized seedlings are relatively excellent in root development compared to bare root seedlings in the process of producing seedlings of C. obtusa, thereby being judged to have grown into excellent seedlings.

• Journal of Korean Society of Forest Science
• /
• v.111 no.3
• /
• pp.374-384
• /
• 2022

There is an increasing demand for Tetradium daniellii seedlings due to their uses as alternative energy, for ecological restoration, and as a honey plant. This study was conducted to determine the optimum container for superior seedling production of T. daniellii. Experiments were performed using five plastic container types (500, 350, 320, 300, and 250 ml) for forestry facility cultivation. The height and root collar diameter growth of T. daniellii seedlings were significantly high in the 350-ml container. High growth appeared primarily in the container with a larger cavity volume and lower growing density. Root development was most active in full sunlight. The maximum dry matter production was observed in the 350-ml container, which was similar to the results of height and root collar diameter growth. QI, an index showing the quality of a seedling, was maximum at 0.97 in the 350-ml container. In conclusion, the 350-ml container is optimum for superior seedling production of T. daniellii.

• Electric Engineers Magazine
• /
• v.212 no.4
• /
• pp.42-48
• /
• 2000

현재 가장 많이 사용되고 있는 교류차단기는 72K이상에서는 SF 가스차단기이며 36K 이하에서는 진공차단기다. 그러나 현재에 이르기까지 교류차단기의 역사를 보면 전력 계통용기기 중에서도 그 형태, 성능 모두 놀라운 발전을 거듭해 온 기기다.