• 베이커리
• /
• 8호통권373호
• /
• pp.138-141
• /
• 1999

• Tribology and Lubricants
• /
• 제27권4호
• /
• pp.204-208
• /
• 2011

Yaw brakes are used in wind turbines to control the orientation of blades to be perpendicular to the wind. These devices are very important machine elements because they are closely related to the overall efficiency of wind turbines. One unit of yaw brakes is composed of a friction pad and a caliper. In this study, a tangential force between the friction pad and the disk is calculated when the brake is acting in 750 kW wind turbine. Then, stress distribution and the deformation of the caliper are calculated using a finite element analysis. An experimental equipment is also developed to verify the exactness of calculated results. The analytical and experimental results are presented and discussed.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.277-280
• /
• 2006

Using yaw system, Wind turbine can face the wind to make it's electricity generating maximum and to make it's fatigue load minimum. So, in wind turbine design process, selecting optimum yaw system is very important work. In this paper, the yaw moments on yaw bearing, yaw drive and yaw brake were calculated. and From the result, the duty cycle was obtained. At last, using this duty cycle, optimum yaw system is selected.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.130-131
• /
• 2011

• 한국자동차공학회논문집
• /
• 제7권8호
• /
• pp.172-179
• /
• 1999

This paper presents a simple but effective DYC algorithm which enhances vehicle lateral stability by using an anti=lock brake system (ABS). In the proposed algorithm, only the front outer wheel is controlled during cornering maneuver instead of controlling all four wheels because the wheel has the largest role in DYC and it is easy and simple to control the only one wheel. An ABS Hardware - In -The -Loop Simulation ( HILS) system that may be used to realistically test real vehicle dynamic behavior in a lab is used for evaluating the proposed DYC algorithm in severe situations where a vehicle is destabilized without DYC . The HILS results show that the proposed DYC algorithm has the potential of maintaining vehicle stability in some dangerous situations.

• 자동차안전학회지
• /
• 제14권2호
• /
• pp.7-13
• /
• 2022

This paper presents a yaw moment control based on estimated mass for manual-shift commercial vehicles. In yaw moment controller, parameter uncertantiy of vehicle mass is important because the desired yaw moment depends on vehicle parameter. However, in the case of commercial vehicle, the weight of the loaded vehicle is more than twice as much as compared to the unloaded vehicle. The proposed algorithm estimates the vehicle mass by using the longitudinal dynamic and gear shifting characteristics. The estimated mass is used to adaptively modify the vehicle parameters. In addition, this paper estimates the chamber pressure of a pneumatic brake and generates the target yaw moment through on/off valve control. MATLAB/Simulink and Trucksim were performed under sine with dwell test. The results demonstrate that the proposed algorithm improves the lateral and rollover stability.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.487-492
• /
• 2000

Yaw moment control algorithm for improving stability of a vehicle in cornering is presented in this paper. A change of the yaw moment according to an increment in brake ship at each wheel is examined and reflected in the control algorithm. This control algorithm computes the target yaw velocity as the vehicle motion desired by the driver for directional stability control in cornering and it makes the actual yaw velocity follow the target one. The yaw moment control was achieved by brake slip control and simple brake slip control logic was introduced in this paper.

• 융합신호처리학회논문지
• /
• 제22권4호
• /
• pp.171-178
• /
• 2021

카라반은 외부의 물리적 요인에 쉽게 영향을 받아 탑승자에게 위험한 상황을 초래하는 경우가 많다. 따라서 탑승자의 안정성을 확보하기 위해 스웨이 현상을 사전에 예방할 수 있는 스웨이 저감 장치를 개발할 필요성이 있다. 본 논문에서는 견인차량과 카라반 사이의 Hitch angle을 최소화하는 것을 목표로 한다. 구체적으로는 견인차량과 카라반 각각에 장착된 IMU 센서를 통해 카라반의 초기 불안정성을 감지하고, PID 제어기를 이용하여 Hitch angle, Hitch yaw rate가 Desired hitch angle, Desired hitch yaw rate에 수렴할 수 있도록 제어 값을 산출한다. 산출된 제어 값에 따라 카라반 좌우 브레이크에 다른 제동토크를 생성하여 분배하고 제어한다. 주행 실험을 통해 스웨이 저감 장치의 성능을 검증한 결과, 제어하지 않은 경우보다 Hitch angle이 감소한 것을 확인할 수 있었고, 횡 방향 안정성 향상률은 제어 전에 비해 78.9% 향상된 것을 확인하였다.