• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.1 no.1
• /
• pp.53-68
• /
• 1981

Most clays under sustained load exhibit time-dependent deformation because of creep movement of soil particles and many investigators have attempted to relate their findings to the creep behavior of natural ground and to the long-term stability of slopes. Since the creep behavior of clays may assume a variety of forms depending on such factors as soil plasticity, activity and water content, it is difficult and complicated to analyse the creep behavior of clays. Rheological models composed of linear springs in combination with linear or nonlinear dashpots and sliders, are generally used for the mathematical description of the time-dependent behavior of soils. Most rheological models, however, have been proposed to simulate the behavior of secondary compression for saturated clays and few definitive data exist that can evaluate the behavior of non-saturated clays under the action of sustained stress. The clays change gradually from a solid state through plastic state to a liquid state with increasing water content, therefore, the rheological models also change. On the other hand, creep is time-dependent, and also the effect of thixotropy is time-function. Consequently, there may be certain correlations between creep behavior and the effects of thixotropy in compacted clays. In addition, the states of clay depend on water content and hence the height of the specimen under drained conditions. Futhermore, based on present and past studies, because immediate elastic deformation occurs instantly after the pressure increment without time-delayed behavior, the factor representing immediate elastic deformations in the rheological model is necessary. The investigation described in this paper, based on rheological model, is designed to identify the immediate elastic deformations and the effects of thixotropy and height of clay specimens with varing water content and stress level on creep deformations. For these purposes, the uniaxial drain-type creep tests were performed. Test results and data for three compacted clays have shown that a linear top spring is needed to account for immediate elastic deformations in the rheological model, and at lower water content below the visco-plastic limit, the effects of thixotropy and height of clay specimens can be represented by the proposed rheological model not considering the effects. Therefore, the rheological model does not necessitate the other factors representing these effects. On the other hand, at water content higher than the visco-plastic limit, although the state behavior of clays is visco-plastic or viscous flow at the beginning of the test, the state behavior, in the case of the lower height sample, does not represent the same behavior during the process of the test, because of rapid drainage. In these cases, the rheological model does not coincide with the model in the case of the higher specimens.

• Journal of Korean Society of Forest Science
• /
• v.16 no.1
• /
• pp.33-62
• /
• 1972

Pitch pine (Pinus rigida Miller) in Korea has become one of the major silvicultural species for many years since it was introduced from the United States of America in 1907. To attain the more rational wood utilization basical researches on wood properties are primarily needed, since large scale of timber production from Pitch Pine trees has now been accomplishing in the forested areast hroughout the country. Under the circumustances, this experiment was carried out to study the wood anatomical, physical and mechanical properties of Pitch Pine grown in the country. Materials used in this study had been prepared by cutting the selected pitch pine trees from the Seoul National University Forests located in Suwon. To obtain and compare the anatomical and physical properties of the different parts of tree such as stem, branch, top and rootwood, this study had been divided into two categories (anatomical and physical). For the anatomical study macroscopical and microscopical features such as annual ring, intercellular cannal, ray, tracheid, ray trachid, ray parenchyma cell and pit etc. were observed and measured by the different parts (stem, branch, root and topwood) of tree. For the physical and mechanical properties the moisture content of geen wood, wood specific gravity, shrinkage, compression parallel to the grain, tension parallel and perpendicular to the grain, radial and tangential shear, bending, cleavage and hardness wree tested. According to the results this study may be concluded as follows: 1. The most important comparable features in general properties of wood among the different parts of tree were distinctness and width of annual ring, transition from spring to summerwood, wood color, odor and grain etc. In microscopical features the sizes of structural elements of wood were comparable features among the parts of tree. Among their features, length, width and thickness of tracheids, resin ducts and ray structures were most important. 2. In microscopical features among the different parts of tree stem and topwood were shown simillar reults in tissues. However in rootwood compared with other parts on the tangential surface distinctly larger ray structures were observed and measured. The maximum size of unseriate ray was attained to 27 cell ($550{\mu}$) height in length and 35 microns in width. Fusiform rays were formed occasionally the connected ray which contain one or several horizontal cannals. Branchwood was shown the same features like stemwood but the measured values were very low in comparing with other parts of tree. 3. Trachid length measured among the different parts of tree were shown largest in stem and shortest in branchwood. In comparing the tracheid length among the parts the differences were not shown only between stem and rootwood, but shown between all other parts of tree. Trachid diameters were shown widest in rootwood and narrowest in branchwood, and the differences among the different parts were not realized. Wall thickness were shown largest value in rootwood and smallest in branchwood, and the differences were shown between root and top or branchwood, and between stem and branch or top wood, but not shown between other parts of tree. 4. Moisture contents of green wood were shown highest in topwood and lowest in heartwood of stem. The differences among the different parts were recognized between top or heartwood and other parts of tree, but not between root and branchwood or root and sapwood. 5. Wood specific gravities were shown highest in stem and next order root and branchwood, but lowest in topwood. The differences were shown clearly between stemwood and other parts of tree, but not root and branchwood. However the significant difference is realized as most lowest value in topwood. 6. In compression strength parallel to the grain compared among the different parts of tree at the 14 percent of moisture content, highest strength was appeared in stem, next order branch and rootwood, but lowest in topwood. 7. In bending strength compared among the different parts of tree at the 14 percent of moisture content clearly highest strength was shown in branchwood, next order stem and root, but lowest in topwood. Though the branchwood has lower specific gravity than stemwood it was shown clearly high bending strength.

• Journal of Chest Surgery
• /
• v.37 no.10
• /
• pp.845-855
• /
• 2004

Background: No general consensus has been available regarding the necessity of postoperative radiation therapy (PORT) and its optimal techniques in the patients with chest wall invasion (pT3cw) and node negative (N0) non-small cell lung cancer (NSCLC). We did retrospective analyses on the pT3cwN0 NSCLC patients who received PORT because of presumed inadequate resection margin on surgical findings. And we compared them with the pT3cwN0 NSCLC patients who did not received PORT during the same period. Material and Method: From Aug. of 1994 till June of 2002, 22 pT3cwN0 NSCLC patients received PORT-PORT (＋) group- and 16 pT3cwN0 NSCLC patients had no PORT-PORT (-) group. The radiation target volume for PORT (＋) group was confined to the tumor bed plus the immediate adjacent tissue only, and no regional lymphatics were included. The prognostic factors for all patients were analyzed and survival rates, failure patterns were compared with two groups. Result: Age, tumor size, depth of chest wall invasion, postoperative mobidities were greater in PORT (-) group than PORT (＋) group. In PORT (-) group, four patients who were consulted for PORT did not receive the PORT because of self refusal (3 patients) and delay in the wound repair (1 patient). For all patients, overall survival (OS), disease-free survival (DFS), loco-regional recurrence-free survival (LRFS), and distant metastases-free survival (DMFS) rates at 5 years were 35.3%, 30.3%, 80.9%, 36.3%. In univariate and multivariate analysis, only PORT significantly affect the survival. The 5 year as rates were 43.3% in the PORT (＋) group and 25.0% in PORT (-) group (p=0.03). DFS, LRFS, DMFS rates were 36.9%, 84.9%, 43.1 % in PORT (＋) group and 18.8%, 79.4%, 21.9% in PORT(-) group respectively. Three patients in PORT (-) group died of intercurrent disease without the evidence of recurrence. Few suffered from acute and late radiation side effects, all of which were RTOG grade 2 or lower. Conclusion: The strategy of adding PORT to surgery to improve the probability not only of local control but also of survival could be justified, considering that local control was the most important component in the successful treatment of pT3cw NSCLC patients, especially when the resection margin was not adequate. Authors were successful in the marked reduction of the incidence as well as the severity of the acute and late side effects of PORT, without taking too high risk of the regional failures by eliminating the regional lymphatics from the radiation target volume.

• Journal of Food Hygiene and Safety
• /
• v.13 no.4
• /
• pp.441-447
• /
• 1998

This study was performed to investigate the changes of amount of S. typhimurium during cooking processes using pork and japchae (a Korean food which is made from meat, vegetables and noodles), and to support a practical application to develop a hazard analysis critical control point (HACCP) model. The pork was purchased in a retail shop, cut ($0.5\;cm\;{\times}\;10\;cm\;{\times}\;10\;cm$, 25 g), tested for Salmonella contamination (results: negative), inoculated with S. typhimurium ($10^{7}\;CFU/g$), then treated in various conditions related to cooking. Mter thawing for 24 hours in various conditions, the number of S. typhimurium was increased to $10^{10}\;CFU/g$ at a refrigerated temperature ($4~10^{\circ}C$), and to $10^{21}\;CFU/g$ at room temperature ($22~29^{\circ}C$). Mter thawing in a microwave oven for 40 seconds, the number of S. typhimurium increased to $10^{8}\;CFU/g$. During the thawing period, the number of S. typhimurium increased over time. At the refrigerated temperature, the number of the bacteria was $10^{10}\;CFU/g$ after 24 hours, $10^{13}\;CFU/g$ after 48 hours, and $10^{20}\;CFU/g$ after 72 hours. At room temperature the number of bacteria reached $10^{11}\;CFU/g$ in 2 hours, $10^{15}\;CFU/g$ in 4 hours, $10^{16}\;CFU/g$ in 8 hours, $10^{18}\;CFU/g$ in 12 hours, and $10^{21}\;CFU/g$ in 24 hours. Mter cooking in a frying pan (150{\pm}7^{\circ}C$) for 3 minutes, the bacterial count was $10^{16}\;CFU/g$. After cooking in hot water for 20 minutes, the bacterial count was $10^{7}\;CFU/g\;at\;60^{\circ}C,\;10^{6}\;CFU/g\;at\;63^{\circ}C,\;and\;10^{4}\;CFU/g\;at\;65^{\circ}C$. The fried pork was mixed with cooked vegetables, noodles, sesame oil, sesame seeds, and seasonings to make Korean japchae. This process took $10{\pm}2$ minutes. The bacterial count in the japchae increased to $10^{7}\;CFU/g$ from the count of $10^{6}\;CFU/g$ of the fried pork before it was mixed with the other ingredients. These results indicate that the amount of S. typhimurium is effected by various different cooking processes. This study can suggest that pork should be cooked in water at over $65^{\circ}C$ for 20 minutes in order to prevent food poisoning, if the pork is contaminated with S. typhimurium. The presence of S. typhimurium in the raw pork is identified in an HA for japchae, and the primary CCP for japchae is inadequate cooking (cooking method and time/temperature). We need to standardize time-temperature-size and amount of pork in cooking japchae, because pork is usually cooked in ordinary frying pans when we make this food.

• Korean Journal of Agricultural Science
• /
• v.9 no.1
• /
• pp.396-450
• /
• 1982

To obtain basic information on the Korean local corn lines a total of 57 lines were selected from 1,000 Korean local collection at Chungnam National University, classified by principal component analysis, and genetic nature was investigated. The results are summarized as follows. 1. There were a great variation in mean values of plant characters of the lines. The mean values of plant characters except for density of kernels varied with types of crossing. All characters except. for tasselling dates were reduced in magnitude when selfed, while those characters were increased when topcrossed. 2. The correlation coefficients among characters studied ranged front 0.99 to -0.59. The correlation coefficients among characters were not greatly changed depending upon types of crosses. 3. In order to classify the lines more effectively, selected 12 plant characters were used to classify 57 local lines by principal component analysis. The first four component could explain 86.4%, 83.4% and 81.1% of the total variations in sibbed lines, selfed lines and topcrossed lines, respectively. 4. Contribution of characters to principal component was high at upper principal components and low at lower principal components. 5. Biological meaning of the principal component and plant types corresponding to the each principal component were explained clearly by the correlation coefficient between principal components and characters. The first principal component appeared to correspond to the size of plant and ear. The second principal component appeared to correspond to the degree of differentiation in organs and the duration of vegetative growing period. But biological meaning of the third and fourth principal components was not clear. 6. The lines were classified into 4 lineal groups by the taxonomic distance. Group I included 52 lines which was 91.2% of total lines, group II 3 lines, group III 1 lines and group IV I lines, respectively. Four groups could be characterized as follows : Group I : early maturity, short-culmed, medium height plant, small ears, medium kernels and medium yielding. Group II : late maturity, medium height plant, small ears, small kernels, prolific ears and higher yielding. Group III : medium maturity, tall-culmed, small ears, small kernels and low yielding. Group IV : medium maturity, tall-calmed, large ears, one ear plant and me yielding. 7. The inbreeding depression varied with plant characters and lines. The characters such as yield, kernel weight per ear, ear weight and plant height showed great degree of inbreeding depression. Group I showed high inbreeding depression in such characters as 100 kernel weight, leaf number, plant height and days to tasselling, while group II showed high inbreeding depression in other plant characters. 8. Heterosis of plant characters varied also with lines. The ear weight, kernel weight per ear, yield, 100 kernel weight, and plant height were some of the plant characters showing high heterosis. Group II showed high values of heterosis in such characters as ear length, ear diameter, ear weight, kernel weight per ear, 100 kernel weight, and leaf length, while group I was high in heterosis in other plant characters. 9. The degree of homozgosity was highest in ear weight (79.1%) and lowest in ear number per plant (-21%). Group II showed higher degree of homozygosity than group I. 10. Correlation coefficients between characters of ribbed and topcrossed lines were positive for all characters. Highly significant. correlation coefficients between ribbed and topcrossed lines were obtained especially for characters such as ear number per plant, plant height, leaf length and yield per plot.

• The Journal of the Petrological Society of Korea
• /
• v.25 no.4
• /
• pp.311-324
• /
• 2016

The characteristics of the rock cleavage in Jurassic granite from Geochang were analysed. The evaluation for three quarrying planes and three rock cleavages was performed using the parameters such as (1) reduction ratio between the value of spacing and the value of length, (2) microcrack spacing frequency(N), (3) total spacing($1mm{\geq}$), (4) exponential constant(a), (5) magnitude of exponent(${\lambda}$), (6) mean spacing($S_{mean}$), (7) difference value($S_{mean}-S_{median}$) between mean spacing and median spacing($S_{median}$) and (8) density of spacing. Especially the close dependence between the above spacing parameters and the parameters from the spacing-cumulative frequency diagrams was derived. The discrimination factors representing three quarrying planes and three rock cleavages were acquired through these mutual contrast. The analysis results of the research are summarized as follows. First, the reduction ratios of frequency(N), mean value, median value, the above difference value($S_{mean}-S_{median}$) and density for three rock cleavages are in orders of G(grain, (G1 + G2)/2) < H(hardway, (H1 + H2)/2) < R(rift, (R1 + R2)/2), H < G $\ll$ R, H < G $\ll$ R, H < G < R and H < G $\ll$ R. The values of the above five parameters for three planes show the various orders of R'(rift plane) $\ll$ H'(hardway plane) < G'(grain plane), R' $\ll$ G' < H', R' < H' < G', R' < G' < H' and R' $\ll$ H' < G', respectively. Second, the values of (I) parameters(2, 3, 4 and 5) and (II) parameters(6, 7 and 8) are in orders of (I) H < G < R and (II) R < G < H. On the contrary, the values of the above two groups(I~II) of parameters for three planes show reverse orders. Third, to review the overall characteristics of the arrangement among the six diagrams, these diagrams show an order of R2 < R1 < G2 < G1 < H2 < H1 from the related chart. In other words, above six diagrams can be summarized in order of rift(R1 + R2) < grain(G1 + G2) < hardway(H1 + H2). These results indicate a relative magnitude of rock cleavage related to microcrack spacing. Especially, two parameters for each diagram, the above difference value($S_{mean}-S_{median}$) and mean spacing, could provide advanced information for prediction the order of arrangement among the diagrams. Finally, the general chart for three planes and three rock cleavages were made. From the related chart, three exponential straight lines for three rock cleavages show an order of R(R1 + R2) < G(G1 + G2) < H(H1 + H2). On the contrary, three lines for three planes show an order of H'(R2 + G2) < G'(R1 + H2) < R'(G1 + H1). Consequently, correlation of the mutually reverse order between three planes and three rock cleavages can be drawn from the related chart.

• Radiation Oncology Journal
• /
• v.23 no.2
• /
• pp.61-70
• /
• 2005

Purpose: Uterine cervix cancer is one of the most prevalent women cancer in Korea. We analysed published papers in Korea with comparing Patterns of Care Study (PCS) articles of United States and Japan for the purpose of developing and processing Korean PCS. Materials and Methods: We searched PCS related foreign-produced papers in the PCS homepage (212 articles and abstracts) and from the Pub Med to find Structure and Process of the PCS. To compare their study with Korean papers, we used the internet site 'Korean Pub Med' to search 99 articles regarding uterine cervix cancer and radiation therapy. We analysed Korean paper by comparing them with selected PCS papers regarding Structure, Process and Outcome and compared their items between the period of before 1980's and 1990's. Results: Evaluable papers were 28 from United States, 10 from the Japan and 73 from the Korea which treated cervix PCS items. PCS papers for United States and Japan commonly stratified into $3\~4$ categories on the bases of the scales characteristics of the facilities, numbers of the patients, doctors, Researchers restricted eligible patients strictly. For the process of the study, they analysed factors regarding pretreatment staging in chronological order, treatment related factors, factors in addition to FIGO staging and treatment machine. Papers in United States dealt with racial characteristics, socioeconomic characteristics of the patients, tumor size (6), and bilaterality of parametrial or pelvic side wail invasion (5), whereas papers from Japan treated of the tumor markers. The common trend in the process of staging work-up was decreased use of lymphangiogram, barium enema and increased use of CT and MRI over the times. The recent subject from the Korean papers dealt with concurrent chemoradiotherapy (9 papers), treatment duration (4), tumor markers (B) and unconventional fractionation. Conclusion: By comparing papers among 3 nations, we collected items for Korean uterine cervix cancer PCS. By consensus meeting and close communication, survey items for cervix cancer PCS were developed to measure structure, process and outcome of the radiation treatment of the cervix cancer. Subsequent future research will focus on the use of brachytherapy and its impact on outcome including complications. These finding and future PCS studies will direct the development of educational programs aimed at correcting identified deficits in care.

• Korean Journal of Soil Science and Fertilizer
• /
• v.9 no.4
• /
• pp.235-244
• /
• 1976

Following results are obtained by re-evaluating N. P. K. and soil improvement trials conducted from 1964 to 1969 in valley paddy soils in rolling lands (Jisan-series, imperfectly drained and Yongji-series, moderately well drained). 1. Average grain yield of rice in no fertilizer plots and the highest yield plots for Yongji-series (31 experiments) were 319 and 507kg/10a respectively, and that of Jisan-series (15 experiments) were 396 and 567kg/10a respectively. The fertility difference between two series may have been a result of the cultivation history. Jisan-series is a mature soil which has a long cultivation history and Yongji-series is sub-mature soil 2. Soil chemical characteristics for Jisan-series are charaterized by 12.8meq/100g in CEC, 6.5meq/100g in exchangeable Ca, 3.9% in OM, and 64 ppm in available $P_2O_5$ For Yongji-series they were 10.4meq/100g in CEC, 4.7meq/100g in exchangeable Ca, 3.2% in OM and 103ppm in available $P_2O_5$. 3. Deep plowing and application of organic matter and lime are expected to be effective in increasing fertility level of soils of Yongji-series. The same will be effective in some soils of Jisan series where the fertility level is low. 4. Jisan-series shows high response to nitrogen, while Yongji series shows sharp decrease in rice yield at the high levels of nitrogen. Both series, however, showed high response to nitrogen only when the OM level was higher than 3%. 5. The optimum level of nitrogen was 8~9kg for Jisan-series, and 10~11kg/10a for Yongji-series. The yield increase per kg of applied nitrogen was 12kg for Jisan-series and 13kg for Yongji series. 6. The optimum level of phosphorus at the optimum level of nitrogen was 6kg/10a for Yongji-series and 3kg/10a for Jisan-series. The optimum level of phosphorus, however, was different depending upon the nitrogen level. It was assumed that Yongji-series required more fertilizer (available $P_2O_5$ was 110ppm) than Jisan-series (available $P_2O_5$ was 64ppm) because the availability of P was higher in Jisan-series than Yongji-series due to the severe reduction of Jisan-series. 7. The response of potassium was also depending upon the nitrogen level. In Yongji-series the potassium response at 8kg/10a nitrogen level decreased with increasing levels of potassium, but the higher level of introgen, potassium response was also higher. In Jisan-series potassium response was recognized at all nitrogen levels. The optimum level of potassium at the optimum level of nitrogen was 8kg/10a in both serieses. 8. The reasonable ratio of NPK fertilizer seems to be 1:0.6:0.6:for Yongji-series and 1:0.4:1 for Jisan-series as N:$P_2O_5$:K.

• Bangmulgwan gwa yeongu (The National Museum of Korea Journal)
• /
• v.1
• /
• pp.36-73
• /
• 2024

The Tomb of Jang Mui located in Bongsan-gun, Hwanghae-do Province has attracted much attention since its first investigation due to the inscribed bricks found there that have allowed the guessing of the name and official title of its occupant and construction date. Inscriptions on these bricks, such as the "Prefect of Daebang Commandery Jang Mui" and the "Mu" (戊, the fifth sign of the Chinese calendar), and "Sin" (申, the ninth sign of the Chinese zodiac), have become the basis for believing the location of the government office of Daebang Commandery to be in Bongsangun, Hwanghae-do Province rather than somewhere in the Hangang River region. From the early days of its investigation, the tomb was suggested as historic remains of the Daebang Commandery along with the Earthen Fortress in Jitap-ri. Inscribed bricks excavated from the Tomb of Jang Mui were featured in several books and articles in the form of photographs and rubbings, leading to a vast body of studies on its construction period and the characteristics of its occupant that drew upon interpretations of the inscriptions. However, the inscribed bricks themselves were not publicly available outside those held in the collection of the University of Tokyo, making it difficult to expect consistent research findings on the types of inscribed bricks and their contents. Following previous studies re-examining the structure of the tomb and the materials used for its construction, most scholars dated the Tomb of Jang Mui to 348, a period after the collapse of Daebang Commandery. However, there is still a lack of adequate examination of the bricks, which account for the majority of the artifacts excavated from the tomb. Among the bricks excavated from most brick chamber tombs, including the Tomb of Jang Mui, only those with inscriptions or designs have been collected. Moreover, among these, only those with inscriptions or designs on the stretcher faces have been documented. Accordingly, the bricks themselves have been notably understudied. This paper intends to reorganize the contents of the inscriptions on eleven types (out of sixty-one pieces) of bricks in the collection of the National Museum of Korea, which make up the majority of the bricks excavated from the Tomb of Jang Mui. It also classified them according to their shapes. Furthermore, it examined the bricks from the Tomb of Jang Mui as architectural materials by focusing on their production techniques, including their forming, drying, and firing. Taking a more specific approach, it then compared the results to other bricks from the second century through the fourth century: those from the brick chamber tombs of the Nangnang and Daebang Commanderies and those from the brick chamber tombs built after Nangnang and Daebang Commanderies were ousted. The examination of bricks from the Tomb of Jang Mui has revealed that these bricks were basically produced using the brick manufacturing techniques of Nangnang, but they incorporated new elements found in bricks from brick chamber tombs or brick-and-stone chamber tombs constructed around the mid-fourth century in terms of their size, the use of lime, and the number of inscribed bricks. This supports the prevailing view that the date of the construction of the Tomb of Jang Mui is 348. The Tomb of Jang Mui sustained the existing brick chamber tomb burial tradition, but its ceiling was finished with stone. It demonstrates a blending of the brick chamber tomb practice of the Nangnang and Daebang Commanderies by using bricks produced based on related techniques, but with new elements such as the addition of a lime layer to the bricks. This fusion reflects the political circumstances of its time, such as the expulsion of the Daebang Commandery and the advance of the Goguryeo Kingdom, leading to diverse interpretations. Given archaeological evidence such as the structure, materials, and location of the tomb, the Tomb of Jang Mui appears to be highly related to the Goguryeo Kingdom. However, the forms of the inscribed bricks and the contents of the inscriptions share similarities with brick chamber tombs constructed during the third and fourth centuries in the Jiangsu and Zhejiang regions in China. Further studies on whether the use of lime was an influence from Goguryeo or a continuation of the Daebang tradition and a comparative examination with contemporaneous stone ceiling tombs will provide a more refined understanding of the Tomb of Jang Mui.

• Explosives and Blasting
• /
• v.30 no.2
• /
• pp.29-42
• /
• 2012

Variables influencing the free face movement due to rock blasting include the physical and mechanical properties, in particular the discontinuity characteristics, explosive type, charge weight, burden, blast-hole spacing, delay time between blast-holes or rows, stemming conditions. These variables also affects the blast vibration, air blast and size of fragmentation. For the design of surface blasting, the priority is given to the safety of nearby buildings. Therefore, blast vibration has to be controlled by analyzing the free face movement at the surface blasting sites and also blasting operation needs to be optimized to improve the fragmentation size. High-speed digital image analysis enables the analyses of the initial movement of free face of rock, stemming optimality, fragment trajectory, face movement direction and velocity as well as the optimal detonator initiation system. Even though The high-speed image analysis technique has been widely used in foreign countries, its applications can hardly be found in Korea. This thesis aims at carrying out a fundamental study for optimizing the blast design and evaluation using the high-speed digital image analysis. A series of experimentation were performed at two large surface blasting sites with the rock type of shale and granite, respectively. Emulsion and ANFO were the explosives used for the study. Based on the digital images analysis, displacement and velocity of the free face were scrutinized along with the analysis fragment size distribution. In addition, AUTODYN, 2-D FEM model, was applied to simulate detonation pressure, detonation velocity, response time for the initiation of the free face movement and face movement shape. The result show that regardless of the rock type, due to the displacement and the movement velocity have the maximum near the center of charged section the free face becomes curved like a bow. Compared with ANFO, the cases with Emulsion result in larger detonation pressure and velocity and faster reaction for the displacement initiation.